Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   DIY (Do-It-Yourself) Guides (https://www.ft86club.com/forums/forumdisplay.php?f=43)
-   -   F-T DRL DIY (https://www.ft86club.com/forums/showthread.php?t=27813)

bibo 08-20-2014 05:08 AM

hood alternative?
 
Thank you very much for this DIY. I'm new to this forum as well as to the FRS world. I have a question. Is there an alternative wire that will give constant power to the DRL other than the white one in the glove box? Reaching there through the firewall is really painful.

Parappa 09-10-2014 06:26 PM

Quote:

Originally Posted by thien (Post 1450199)
Thanks for all the help everyone! I had some trouble getting this to work, but if I had to do another one, it'd be 10x easier! I hooked the red wire to turn signal. Its probably easier than going through the glove compartment.

If you plan to go through the firewall, a quick tip for you is to tape the wire to the screwdriver and push the screwdriver through.

If you plan to do the signal wire, splice into the green wire if you want it on when you turn on parking lights. Tap into the pink wire if you want your drls to blink with the signals...

Big big big thanks! Green wire! Wondering which wire did what....huge thanks !

timmydatooth 07-28-2015 09:54 PM

Hey guys I'm trying to install these on my car and I have a few questions.

1) I want to connect them to where they turn on when my parking lights are on. Which wire do I need to tap into? Where is it located, whats it look like and what color is it?

2) Where is the power wire for the headlights that you connect the blue wire to so they become less bright with the headlights on? (color, location)

timmydatooth 08-01-2015 09:41 AM

http://i62.tinypic.com/11bhiiq.jpg

Still trying to figure out which is the power wire for the low beams that i tap the blue wire to... I have a 10 series btw with the stock hid lights

aegisdrgn 08-13-2015 12:33 AM

Quote:

Originally Posted by timmydatooth (Post 2342830)
http://i62.tinypic.com/11bhiiq.jpg

Still trying to figure out which is the power wire for the low beams that i tap the blue wire to... I have a 10 series btw with the stock hid lights

The big fat red wire on the right with the brown rubber plug/gasket.


All times are GMT -4. The time now is 09:45 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.