Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 5 of 8 1234 5 678
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Cosmetic Modification (Interior/Exterior/Lighting) (https://www.ft86club.com/forums/forumdisplay.php?f=36)
-   -   Whats your FRS armrest and how is it (https://www.ft86club.com/forums/showthread.php?t=77612)

艾洛 12-09-2014 10:02 AM
Quote:
Originally Posted by Scenic Driver (Post 2022392)
If you are short (I'm 5'5"), the ebrake handle is in the perfect spot if you're not shifting and want to drive one handed. In my seating position my elbow would barely touch the front edge of the higher armrests so it would get no use.
Well, this rules out me getting one then. I'm shorter than you. #86shortsquad :cry:

Sarlacc 12-09-2014 03:07 PM
Quote:
Originally Posted by 2SeeKU (Post 2027097)
Made this myself. I just need to cover it in leather similar to that of the gear stick now:
That's a very cool idea, stealthy armrest!

AeroToy 12-09-2014 03:38 PM
Quote:
Originally Posted by kodyo (Post 2021651)
Kind of a bad picture, but here's mine:
http://i.imgur.com/z9knPgj.jpg
I have that one too, it's simlpy amazing! By far the best mod interior-wise!

hahaman86 12-12-2014 10:27 AM
The dealer's offering me the sliding trd armrest for 245 plus tax installed should i take it?

RojerLockless 12-12-2014 11:09 AM
Same one here.Best mod ever it looks perfect and lets face it. Some of these in this thread look absolutely silly
lol

Quote:
Originally Posted by kodyo (Post 2021651)
Kind of a bad picture, but here's mine:
http://i.imgur.com/z9knPgj.jpg

Sarlacc 12-12-2014 12:53 PM
Quote:
Originally Posted by RojerLockless (Post 2053780)
...lets face it. Some of these in this thread look absolutely silly lol
If you have to be negative and derisive, at least be specific and up front about it.

Dake 12-12-2014 03:37 PM
Well, the one that looks like a vinyl-covered loaf of bread or the top of my grandma's toilet seat cover for starters. :D :D

Sarlacc 12-12-2014 07:19 PM
Quote:
Originally Posted by Dake (Post 2054052)
Well, the one that looks like a vinyl-covered loaf of bread or the top of my grandma's toilet seat cover for starters. :D :D
That is specific and up front. Something I can disagree with. :thanks:

CharleyGFX 12-12-2014 07:37 PM
Quote:
Originally Posted by RojerLockless (Post 2053780)
Same one here.Best mod ever it looks perfect and lets face it. Some of these in this thread look absolutely silly
lol
Can anyone tell me where to get this? or how it works? Like I get that it sits nice and looks good, but from the picture here.. It looks like you can just flip it to the side to access the cup holders?

funwheeldrive 12-12-2014 08:42 PM
Quote:
Originally Posted by fatalelement (Post 2026988)
I dunno if the 2015 model is different, but I think we all have a drink holder in the door that is clearly labeled as such. I can't put a large soda in there but that's not a bad thing. Coffee fits fine for me. Travel mugs too.

With harnesses, and honestly without before since I'm awkwardly tall, the center cup holder is a huge joke and way too far back if you're using the cigarette port to charge a phone (usb is way too slow)
All 86s have the door drink holders, but you're not supposed to use that with certain kinds of drinks. Water bottles and mugs are the only things I would put in there.

kodyo 12-12-2014 10:18 PM
Quote:
Originally Posted by CharleyGFX (Post 2054310)
Can anyone tell me where to get this? or how it works? Like I get that it sits nice and looks good, but from the picture here.. It looks like you can just flip it to the side to access the cup holders?
Got mine here:
http://www.fteightysix.com/new-produ.../#.VIuhkDHF98F

You have to drill holes in the center console and it screws into that. It hinges open from the passenger side, so the driver can access it. Cup holders are still available, but I only use those occasionally. It's more for someone who rarely uses the cup holders, but occasionally needs them (e.g. my girlfriend and her coffee).

RickyBobby 12-13-2014 12:16 PM
Quote:
Originally Posted by RojerLockless (Post 2053780)
Same one here.Best mod ever it looks perfect and lets face it. Some of these in this thread look absolutely silly
lol
IMO they all suck, some more than others, and the OEM ones are way overpriced.

Why can't someone come out with a normal type armrest that flips back, not to the side, like armrests in other vehicles. It would just require drilling a few holes for a back hinge.

billyk 12-13-2014 12:38 PM
Quote:
Originally Posted by RickyBobby (Post 2054831)
IMO they all suck, some more than others, and the OEM ones are way overpriced.

Why can't someone come out with a normal type armrest that flips back, not to the side, like armrests in other vehicles. It would just require drilling a few holes for a back hinge.
Have to agree that the prices some dealerships get are pretty steep. I think I recall from another thread that someone paid over $400 for an OEM armrest installed. Even at $250 it seems a tad expensive for what it is. I do realize that OEM interior parts are rarely a bargain.

Dake 12-13-2014 01:38 PM
Quote:
Originally Posted by Sarlacc (Post 2054273)
That is specific and up front. Something I can disagree with. :thanks:
Ha! And yet you knew exactly which ones I meant didn't you. ;) :D :D


All times are GMT -4. The time now is 04:58 PM.
Page 5 of 8 1234 5 678
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.