![]() |
Thanks Wparsons and GTB/ZR-1
|
Went to the Track again last night for street to strip.
Ran a 15.8 Launched at about 4500RPM with 50% dump and trottle modulation. Removed all the shit in the trunk. 1/4 tank 93 with octane booster. tire pressure lowered to 1.6 psi Just happy i broke 15's! |
Quote:
Anyone done it or gotten close? IMO, given my experience it's going to take more than slicks and 20whp to drop 8/10th's. This is based on 14.7 being listed as the fastest time in this thread and the person I quoted making reference to the 14.7 time. If you want to hit a 13.XX without FI I'd suggest using a setup like the Robispec car - drastic weight reduction, suspension, tires, more power and a driver mod would make the car come close to the 13's.:burnrubber: |
Quote:
|
^^ Shave the 60' down to 2.0 and that's a 14.0, better tires should get it in the 1.8 range and into the 13's.
|
Quote:
|
With sticky tires and a good driver it should totally be doable. You can hit a 2.0 on sticky street tires with a FWD car with a good driver.
|
What are Autos seeing in quarter mile times?
|
Quote:
|
This car is pretty easy to launch. I'd have no problem running a 14.7 in it.
|
Once the track opens, I am goin to see what I can get.
With my G-tech I pulled a 5.8 0-60 and a 14.2 qtr mile. I have used the same G-tech at the track already and the time was dead on, just the mph was off? Simmons |
Wow! Dude 14.2 is awesome for the minimal mods you've done. What is your KW or HP output now after the mods?
|
Quote:
I think with the latest tune I am making a little more. I will probably go back to the dyno after the Borla header is in. Simmons |
Damn! Pull some weight off and you'll hit 13's easily!
|
| All times are GMT -4. The time now is 07:57 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.