Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 4 of 4 123 4
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Electronics | Audio | NAV | Infotainment (https://www.ft86club.com/forums/forumdisplay.php?f=27)
-   -   Door Mirror Auto system (prod no. H2717CA000) for BRZ (https://www.ft86club.com/forums/showthread.php?t=50865)

voyager2285 06-15-2014 02:44 PM
Quote:
Originally Posted by ucsmfu (Post 1797169)
Hey voyager2285, I noticed that your also located in Vancouver, BC. Are you in the ft86van club ?

Have you looked into the cost for the folding mirrors yet ?

Thanks
I've gone to a few meets from before :)

I've yet to find any other sources for the hardware. I will also need to look into the harness/ECU compatibilities.

ucsmfu 06-16-2014 02:34 AM
Quote:
Originally Posted by voyager2285 (Post 1797573)
I've gone to a few meets from before :)

I've yet to find any other sources for the hardware. I will also need to look into the harness/ECU compatibilities.
Please keep me updated if you find out. Hope to see you at the next meet.

ucsmfu 03-17-2015 02:28 AM
Quote:
Originally Posted by ucsmfu (Post 1797170)
Trap63, we will also need that harness from Japan parts correct ?

thanks
trap, were these all the parts that I need included the switch ?

thanks

914_WHITE_FRS 05-10-2015 11:31 AM
Will this work for the 2013 Scion Fr-s USDM version???????????

I have a empty spot on my door interior for that switch button and then i need the harness right?

Foobar 05-10-2015 01:27 PM
Quote:
Originally Posted by 914_WHITE_FRS (Post 2243613)
Will this work for the 2013 Scion Fr-s USDM version???????????

I have a empty spot on my door interior for that switch button and then i need the harness right?
You need a whole lot of shit for this to work on a USDM car. Switch assembly, wiring, and the motorized mirrors which aren't sold in the USDM.

914_WHITE_FRS 05-10-2015 02:11 PM
Quote:
Originally Posted by Foobar (Post 2243693)
You need a whole lot of shit for this to work on a USDM car. Switch assembly, wiring, and the motorized mirrors which aren't sold in the USDM.
aww man that sucks! thanks for replying me back though dude! :party0030:

Trap63 05-10-2015 02:20 PM
Quote:
Originally Posted by ucsmfu (Post 2172083)
trap, were these all the parts that I need included the switch ?

thanks
Yes, they are. But first you need to verify if ECU pin are powered.
An example:
in Europe's wiring we haven't connector beside roof to install homelink mirror that you commonly get on USDM and CDN market.
Therefore verify if internal wiring is there inside door card.


All times are GMT -4. The time now is 05:51 AM.
Page 4 of 4 123 4
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.