It's a cake walk @grostoine. Just take your time and let it come together. The hardest part for me was getting the oil reservoir mounted. You'll need to release the brake line from the plastic clips from enough locations to raise the line without damaging it.

Seriously Kraftwerks... WHAT an awesome kit. Easy installl WOW !!!

Miss the A/C cover doe....

I was missing the belt cover as well and hear its shipping out tomorrow. I'm curious if you had any issues getting at the bolt under the brake line.

Did you purchase a KW tune? If so what do you think and when is your dyno going to be up :).

I should have the results of the @Drift-Office tune on this kit no later than Saturday

Whew! Order finally paid for and should ship today. Really, really looking forward to your results @digital_assassin ... I'm going to push the install until after the new year. Going to fly my tuner in because I'm running a FlexFuel kit

We're glad to hear you are satisfied with our product! It means a lot to see our hard work is appreciated. Post some pictures or video of your beast when you get a chance, we'd LOVE to see it! THANK YOU! :party0030:

Here is some photos :

Sorry for the french, I only copy/paste since I have 3 forum to update will 2 of them are in french :)

Bon vu j't'un bon gars ma mettre les photos loll. Il me reste la BOV a installer pi j'ai pas mal terminer pour cet étape. Va rester a ''primer'' le systeme pi le remplir d'huile.

C'est long downloader 24 photos :O

http://imageshack.us/a/img19/2624/jpd7.jpg
http://imageshack.us/a/img89/6721/eh2d.jpg
http://imageshack.us/a/img542/150/8dx5.jpg

Heiiinn Honda Parts sur un SUBARU :O loll Map sensor.
http://imageshack.us/a/img34/918/8wk8.jpg
http://imageshack.us/a/img12/705/mkcj.jpg

Let's get started
http://imageshack.us/a/img30/2438/6ysg.jpg
Drive pulley
http://imageshack.us/a/img850/5568/1vd9.jpg
Les supports
http://imageshack.us/a/img27/3235/isej.jpg
Avec la plates
http://imageshack.us/a/img571/4499/j7xx.jpg
http://imageshack.us/a/img545/7127/ode9.jpg
http://imageshack.us/a/img801/3113/1h1u.jpg
http://imageshack.us/a/img20/6527/hnzs.jpg

Supercharger oil cooler
http://imageshack.us/a/img197/958/o8t2.JPG
Passage des lignes
http://imageshack.us/a/img27/4007/sye0.jpg
http://imageshack.us/a/img833/9692/30t6.jpg
http://imageshack.us/a/img24/7561/kfwn.jpg

Intercooler et piping
http://imageshack.us/a/img401/5656/uue3.jpg
http://imageshack.us/a/img268/9610/xqc.JPG

Et la pièce de résistance, le dipstick que j'avais casser en enlever la Crankshaft pulley
http://imageshack.us/a/img542/6446/k91b.jpg

I follow your advice and it all go pretty well for the bolt under the brake line! The Hardess part was to get the pulley on the adapter. I had to uninstall it from the engine because it was too tight. For the alignement I used 2 longer bolt. But all in all is pretty easy install...I done everything alone.

My car is stored until April so I guess I won't know how it goes until then. I did not purchase the KW tune because I lost my job and I made everything that I could so I spend less money... I had engagement for the kit and really want it but the tune can certainly wait for the moment... Plus I had to change my headers :(

I can't wait on your result's !

Yes. Just hang tight a bit... :)



Bob @ Drift-Office, LLC

I purchased one as well. The compressor outlet looks to be in the correct location so maybe that was just an issue with some? May start the install Sunday. Good advice in this thread!

Added you to the owners list @dren. Can't wait to see your results!

Digital assassin, what are the results? Did the kit made less, equal or more power than the jr kit in the oder thread?

We shall see tomorrow. No posting happening until I pick it up.

And the results are in!
http://www.ft86club.com/forums/attac...7&d=1387071025

It's been bugging me that both kits instructions don't address this. According to Rotrex the Oil Reservoir should be lower than the Rotrex. The KW kit location can be worked to achieve the proper positioning with a little work. Had to bend the bracket a bit and then bend the tab holding the molex plug out of the way. I don't know if this is an issue or not but I changed mine up just to be safe.

http://i1144.photobucket.com/albums/...pso7bwiyl6.jpg

Look by the battery and you can see how high it was.
http://i1144.photobucket.com/albums/...psmkbc9say.jpg

So I lowered it waaaayyy down.

http://i1144.photobucket.com/albums/...pshixsgozf.jpg

I'm interested to see if it is in this position that maybe it will actually flow oil. I can't start the car tonight since the kids and neighbors are asleep :)