Thanks! I will be ordering these shortly. Yeah if anyone finds a fit for the wheel caps it would be a great Christmas present to the forums!:thumbsup:

The wheel caps are 48mm in diameter. Here's a whole thread on wheel cap alternatives:

http://www.ft86club.com/forums/showthread.php?t=23723

Merry Christmas :)

Has anyone looked into the toyota nameplate badge that is positioned on the rear left side on the gt86's.
After looking at extensive pictures etc i know that really doesn't help hah but I found that the 03s and on camrys nameplate badge on the back is very similar if not the same as the gt86.
Pn# 75447-AA020 for those that want to take a look.
I ordered one so ill let you guys know how it looks when it arrives!:happyanim:

Here are my new badges, used carbon fiber vinyl behind them.

And the back:

For those interested I ordered the nameplate emblem off the 2003-2006 camry as I find its the most closest if not the same :P as the nameplate that goes on rear of the toyota gt-86.
Here are the emblems I got from the dealer today! The nameplate emblem was 12$

http://imageshack.us/a/img23/159/imagerwg.jpg

Awesome, it looks like the same size as the JDM Toyota badge. Post up some pics of that bad boy on your car! :)

I'm going to swing by my local Toyota shop to get one of these. Then the only badge I'll need is the JDM GT86 badge... which I should be able to pick up in October.

Sorry for the extremely late reply! I haven't logged on in ages :(

Sure thing! Again I found this nameplate emblem closest to the GT86 than the others. The matrix nameplate for example...the font was too thick.
The two "T" emblems fit right on perfectly. I managed to pick up a set of the "JDM" red piston badges too :)

http://img855.imageshack.us/img855/3724/0zus.jpg

The part number
90975-02069
90975-A2003

which is front and rear??? are they fit perfect on the FR-S???

90975-A2003 is for the front
90975-02069 is for the back

And it is a direct fit, the pins on the emblem line up with the datum holes on the car :)