Not entirely true.
I'm on 9.5 +34, lowered, don't rub, and it looks fine.
It does poke, but not that much, and I have 2.9 camber so it looks fine.
Please don't give misinformation. 8-10mm spacers on +45 would make it +35/+37ish which MOST people running 9.5 widths are running. So yeah they fit with minor poke depending on camber.

With that said, you probably need coil overs if you want to run 9.5 widths and want little to no poke.

The information I provided is NOT misinformation for this specific wheel on the vehicle.

The fact is that the wheels will poke out of the fenders. Whether it looks acceptable is subjective...

Unless if you keep the ride height very high, the spring/strut travel up/down over bumps will cause the tire to hit the fender.

Most people wouldn't want to run -2.9 camber on a street car...

Lol nice

Any camber adjustments?

Just the slotted hole on the strut tower. I don't have any camber plates.

Wheel Color
 

What color are the wheels? Gunmetal or hyper silver? Great looking car!

The color is hyper silver with a light coating of brake dust.

Thanks. How do you like the ST coilovers? Would you recommend them?

18x9.5 all around, 255/35 Nitto Invo's, Fortunte auto coilovers, spl lca's.
http://i843.photobucket.com/albums/z...psaji3hjca.jpg

@x18999 @DCStorm @loogs @Scaldy @Drue

For the guys who haven't adjusted caster (no front LCAs nor top hats), do you experience faint rubbing when you turn full lock (and worse when full lock on uneven ground)?

I'm on ST coilovers, -2.0 front camber with 18x9.5 +45 wheels and found signs of slight rubbing in my front wheel wells.

BBK fitment
 

Does anyone know if the raijin 18x9.5+45 will fit over the bbk's in the front and rear. I would want to get these wheels if they fit.

anyone know if 18x9.5 +45 w/ 255/35 tires staggered with 18x8.5 +45 w/ 235/40 tires would fit the pp brembos? im looking to buy a set of wheels w/tires and want to find out before i drive out of state to pick up.