Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Electronics | Audio | NAV | Infotainment (https://www.ft86club.com/forums/forumdisplay.php?f=27)
-   -   Center Console Radio Control Plan - Continuing nalc's saga (https://www.ft86club.com/forums/showthread.php?t=44827)

mid_life_crisis 11-11-2013 11:57 AM

Quote:

Originally Posted by rishi (Post 1324560)
It's the stock BRZ Fujitsu Ten, which is quite different from the Pioneer FR-S head units in it's inner workings.

Damn.

foglesre 11-11-2013 10:36 PM

Whoops...appears I failed to plug the GPS antenna correctly. Looks like I'm going back in.

One disadvantage of this setup - now I'm constantly flipping XM channels...

nalc 11-12-2013 09:09 AM

nice work, that looks really clean.

I ended up relocating my OEM switches to the key fob blanking plate, which is a lot prettier than where I had them, and still fairly accessible, but yours is much cleaner.great job

BRZNutt 11-13-2013 11:49 AM

I would not use this often enough to justify the effort, but props to you for successfully pulling off a very clean and functional installation. I hope you are an engineer so all that talant is also being used on a daily basis.

Jive Turkey 11-13-2013 03:36 PM

i have been wanting to do this for a long time, but that mounting spot doesn't work for me, thats where my push start is....back to the drawing board.

IceFyre13th 11-13-2013 05:20 PM

So, I have to ask.......is the radio too far away to reach????

mid_life_crisis 11-13-2013 05:55 PM

Quote:

Originally Posted by IceFyre13th (Post 1329654)
So, I have to ask.......is the radio too far away to reach????

There's one in every crowd.

You have to take your eyes off the road to use the controls on the radio. Putting an arm rest on the center console and locating switches where he did, you can do it by touch.
Plus it's just a friggin cool bit of work.

nalc 11-13-2013 08:48 PM

Quote:

Originally Posted by Jive Turkey (Post 1329450)
i have been wanting to do this for a long time, but that mounting spot doesn't work for me, thats where my push start is....back to the drawing board.

I've got them on my steering column. Pretty good spot in terms of reach (you don't have to move your hand too far from them) and while it doesn't the greatest, it's tucked away in an inconspicuous spot so nobody notices. Could also probably do some fiberglass work to blend it into the steering column if it was that big a deal.

http://i.imgur.com/L4YxaBch.jpg

foglesre 11-13-2013 09:30 PM

Quote:

Originally Posted by BRZNutt (Post 1328892)
I would not use this often enough to justify the effort, but props to you for successfully pulling off a very clean and functional installation. I hope you are an engineer so all that talant is also being used on a daily basis.

Yes, I am an engineer, though I don't do a lot of engineering anymore. This is my creative outlet. Quite a fun little project. It does seem to be an indication that I have too much free time on my hands though...

Jive Turkey 11-13-2013 10:11 PM

Quote:

Originally Posted by IceFyre13th (Post 1329654)
So, I have to ask.......is the radio too far away to reach????

on the BRZ, everything is touch screen, the buttons are tiny and its very annoying when you press it and nothing happens or you're on a bump and miss the button. having it on the wheel is no only convenient, but its less irritating.

also, please dont go around threads posting like a smart ass, it'll come bite you in the ass.

Quote:

Originally Posted by nalc (Post 1330031)
I've got them on my steering column. Pretty good spot in terms of reach (you don't have to move your hand too far from them) and while it doesn't the greatest, it's tucked away in an inconspicuous spot so nobody notices. Could also probably do some fiberglass work to blend it into the steering column if it was that big a deal.

http://i.imgur.com/L4YxaBch.jpg

actually...THATS NOT BAD, i can definetly mold that somehow...hmmm

but i'd prefer the CC method. all i want is volume and next track

foglesre 11-13-2013 11:10 PM

Quote:

Originally Posted by Jive Turkey (Post 1329450)
i have been wanting to do this for a long time, but that mounting spot doesn't work for me, thats where my push start is....back to the drawing board.

I would try to get an auto transmission traction, snow/sport , stability button set and try to hack the snow/sport button for seek up/down. I came very close to going down that route.

Jive Turkey 11-13-2013 11:13 PM

Quote:

Originally Posted by foglesre (Post 1330283)
I would try to get an auto transmission traction, snow/sport , stability button set and try to hack the snow/sport button for seek up/down. I came very close to going down that route.

thats actually genius...

foglesre 11-14-2013 12:16 AM

Quote:

Originally Posted by Jive Turkey (Post 1330291)
thats actually genius...

There's one available on ebay for cheap. I had this in my shopping cart for a while. Honestly not sure what a new one costs. It may take some work as that button is integrated into some electronic circuitry (see previous page of this post) but it might be doable...

http://www.ebay.com/itm/2013-SCION-F...ee796a&vxp=mtr

Floggin Tires 11-14-2013 12:37 AM

To the OP.
Nice dude.
Love seeing lil functional mods like this.
:thanks:


All times are GMT -4. The time now is 11:33 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.