Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Forced Induction (https://www.ft86club.com/forums/forumdisplay.php?f=78)
-   -   BRZ + Supercharger = ??? 1/4 mile (https://www.ft86club.com/forums/showthread.php?t=33779)

swift996 04-18-2013 10:12 PM
Quote:
Originally Posted by wparsons (Post 876205)
SRT4's with stickier tires would easily hit a 13.8 otherwise stock, and since RWD hooks up way better I wouldn't doubt an FR-S could easily hit a couple tenths faster still.

An e46 M3 will run a low 13 with the stock 330hp at the crank and about 600lbs more weight (they're ~3400lbs), so I see no reason why an FR-S making an honest 250whp couldn't run low 13's either.
I ran a 13.047 with my M3 (w/ intake) and had a friend run a 13.9 many years ago in a bone stock SRT4.

s2d4 04-19-2013 04:14 AM
Quote:
Originally Posted by kioton32 (Post 876128)
I will be fine taking a base system and modifying it to be what I want... Putting a larger blower means ill have to modify the bracket and base and I'm fine doing that... I know what om doing and am not going to ruin anything... I'll be doing a full build thread to show progress and it will be fine.
So you are going to spend 3.6k on a kit and only have use for one pipe? The inlet, outlet, placement and size (specifically length) may mean that it wont even fit let alone the extensive modification.

Perhaps it would make much more sense to start from scratch if you knew what you are doing?

wparsons 04-19-2013 09:44 AM
Quote:
Originally Posted by Xdragonxb0i (Post 875195)
it doesnt quite matter the methods, just the HP and TQ curves.

500whp will get you in the 12s or less but at this point the the problem will be putting all the power down to the wheels
There's at least one car making ~400whp on video running an 11.3@127mph, 500whp is enough to get deep in the 10's if the transmission holds up.

Supermassive 04-19-2013 11:29 AM
Quote:
Originally Posted by wparsons (Post 877202)
There's at least one car making ~400whp on video running an 11.3@127mph, 500whp is enough to get deep in the 10's if the transmission holds up.
Accelerated Performance posted an 11.2 on 460WHp, so yeah it's possible.

kioton32 04-19-2013 11:44 AM
Quote:
Originally Posted by s2d4 (Post 876969)
So you are going to spend 3.6k on a kit and only have use for one pipe? The inlet, outlet, placement and size (specifically length) may mean that it wont even fit let alone the extensive modification.

Perhaps it would make much more sense to start from scratch if you knew what you are doing?
I need the intake manifold, fuel rail, downtube, pulley, belt, and the ecu remapping tune for the Twin Screw... A TS SC is a lot different then a turbo tune or centri SC so I need thier tune to modify.

stockysnail 04-19-2013 01:07 PM
I would guess upper 13s-14s with low to mid 200s in whp, as it will depend on the driver as well as the car. I've only drag raced a couple times and with a tuned VW R32 with 285chp I did low 14s and with a stock evo 9 rs I did about the same, which seems right since they had similar horses to weight and both all wheel drive.

Tansey86 04-19-2013 02:07 PM
Quote:
Originally Posted by Supermassive (Post 877397)
Accelerated Performance posted an 11.2 on 460WHp, so yeah it's possible.
And their trap is good for a high 10 second pass. This car doesn't need more than 425rwhp to get into the 10's, it just needs the traction.

For a bit of perspective, a 2014 mustang runs high 11's with that power.

skatery1989 04-19-2013 02:11 PM
Thinking about going this week to see how the superchager helped my time.

BRZ NA 09-07-2014 12:12 PM
Just curious, how much is Jackson supercharger kit weight? I assumed that Turbo charger kit might weight less right?

Poodles 09-07-2014 05:58 PM
Quote:
Originally Posted by Supermassive (Post 875230)
What kills me about that HKS Supercharger making 300HP is how little torque they make. I'm running 7lbs of boost on my turbo setup which is good for 260WHP with 211 Wtq, while the 300WHP HKS setup is making only 222Wtq...

Superchargers are cute...

Also boost spikes come from equipment issues/failures, also if you get a good tune with EcuTek or run an AEM failsafe you can protect your car from such issues.


Doesn't matter, HP is what really wins races.

King Tut 09-11-2014 11:28 AM
Quote:
Originally Posted by BRZ NA (Post 1935610)
Just curious, how much is Jackson supercharger kit weight? I assumed that Turbo charger kit might weight less right?
You really thought this was the year old thread to bump to get that question answered? Go ask that question in the Jackson Racing Owner's thread. I would say that a JR supercharger using the OEM header would weight more overall than a turbo kit.


All times are GMT -4. The time now is 06:25 PM.
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.