@Td-d, what's changes have you made? Also Can you check on idle stability ? Do you already have the x and y for logging?


Sent from my iPad using Tapatalk

Here's the link to notepad plus http://notepad-plus-plus.org/download/v6.6.9.html
My versions gonna get updated today, seem mine's quite outdated now at 6.1.3, May 28 2012 build LOL

Do we have logging addresses for B01D? I've acquired an OP2 and would love to use it for logging :)

Back on 98 as E85 locations were getting too hard and the economy wasn't great.

First 2 logs:
http://www.datazap.me/u/tech86/98-stage-1

3rd log split in 2 for size limit.
http://www.datazap.me/u/tech86/98-stage-1-0

Any comments?

IAM dropped to O.9 , most likely due the -1 or greater knock events shown in the other logs around 2700 and 3000 rpm probably worth pulling 0.5 out of the advance map at those rpm/load points where your corrections is over 1 degree.

which 98 are you using BP seems worse than shell for knock on these cars.

fuel trims afr look ok.

I do see a couple of those events but didn't think they were overly concerning. Are you talking about 0.5 from knock correction advance A? Not better to drop base timing B a bit?

LOL BP stands out that much ;) but yeah, was the closest servo at the time.

Yeah happy with the trims, still using stock A01G MAF scale so not sure I need to touch them just yet.

If I haven't posted yet, I'll put them up for you shortly phrosty, no problem.

I prefer to pull timing from Base_TIMING_B rarther than Knock Correction Max A as it does not effect what hapens when IAM drops.

However if you try Caltex or Shell fuel you probably wont need to remove that timing.

Good point. Still got a near full tank so I'll back it off for now and reload the current map with different fuel. P100 would sort it out no doubt, but I heard they were discontinuing it?

The facebook guys @Wayno ect said they saw something of facebook about it , but nothing on their website www.unitedpetroleum.com.au, they seem to be still expanding E85 as well hopefully P100 and E85 will stay who knows ?

Where do they get posted to? I can't find them in github.

Normally in Steve's main Tactrix thread - I haven't set up a Github directory for it yet. Probably should.

Alright, I'll keep looking :)

I've tried to run the logcfg.exe for myself and it appears to be written for a very specific RomRaider configuration that I don't have. Otherwise I'd just create it myself. Going to have a look at the .xml files and see if I can just rewrite the program quickly.

I'll get to it this weekend Phrosty - I looked, hadn't posted up yet.

Logcfg won't work because it relies on the master logger.xml that RR logger uses, with its standard notation for the parameters (E_XXX - e.g. E_AF_Correction_1_4byteExt_E81). We need to generate a whole new set of parameters in this syntax to work for Romraider - I just haven't had the time...