Please see because once you introduce a big throttle in your blog that we have installed, such as suspension the other day. Your car is a vehicle here.
http://luckstaff.cocolog-nifty.com/b...dscn9451_1.jpg
http://luckstaff.cocolog-nifty.com/b...ea2a9890bc.jpg

Today BRZ & 86 are receipts from the morning to the pits! Attach the elSPORT Sasupenshishon, BRZ is 86
I own mounting applied, the setting was injected expertise BILSTEIN BSS + rack kit.
I also replaced the front stabilizer, What do I do with the secret? Is http://emojies.cocolog-nifty.com/emo...ldsweats01.gif
There is also the choice of stabilizer expertise ... http://emojies.cocolog-nifty.com/emoticon/sweat01.gif
http://luckstaff.cocolog-nifty.com/b...dscn9824_1.jpg
BRZ is to complete setting in elSPORT V1!
Injected into the know-how is already full rack of course this also http://emojies.cocolog-nifty.com/emoticon/dash.gif
http://luckstaff.cocolog-nifty.com/b...0/dsc08750.jpg
http://luckstaff.cocolog-nifty.com/b...0/dsc08752.jpg http://luckstaff.cocolog-nifty.com/b...0/dsc08751.jpg
When the vehicle is traveling, president of Toyota ... what to visit there!
I was hella surprised.
I was very pleased and woven convey the status of the current 86 and BRZ.
It was a little bit of conversation, I was truly nervous http://emojies.cocolog-nifty.com/emoticon/happy01.gif
Seems to have gotten very interested also shown in the recent rally.
Ah ~ I was really surprised http://emojies.cocolog-nifty.com/emo...ldsweats01.gif
I should have taken that away 2SHOT photo http://emojies.cocolog-nifty.com/emoticon/crying.gif
It is mortifying ('Д ⊂ Gusun

Notice that there is no article that is attached to your car the wing of 86 had seen the contents of the blog the other day, I I can not believe they did not have to introduce once though it is selling well in the rack ヾ I (__ *) reflection ... 86 introduce today is the customers who visit us for the first time last weekend, there was a stock happens to keep the vehicle on the spot, I was allowed to attached to the clear coating.
http://luckstaff.cocolog-nifty.com/b...8/dscn9631.jpg
http://luckstaff.cocolog-nifty.com/b...8/dscn9630.jpg
http://luckstaff.cocolog-nifty.com/b...8/dscn9632.jpg
Good?
Although there are likes and dislikes, you say that you look good http://emojies.cocolog-nifty.com/emoticon/happy01.gif
Here are some images are also like this.
http://luckstaff.cocolog-nifty.com/b...65550130_n.jpg
o you have a picture you've gotta get it out (__) o Peko~tsu


The following is a picture of the 86's in the showroom certain AREA86
http://luckstaff.cocolog-nifty.com/b...83194784_n.jpg


Gazoo rack 86 is just 86 at the time of image http://emojies.cocolog-nifty.com/emo...ldsweats01.gif
http://luckstaff.cocolog-nifty.com/b.../dscn8872s.jpg

What color do you installed 86 if you? Assumption that I wear?
Thank you I'm sorry F (゚ ∀ ゚ F) Ahya

86 yesterday as I was going to be the installation of a second ENDLESS caliper.
Mr. users we have installed last month, was set around MONO4, you may not be able to change the color now is MONO4
Mounted in gold color finish custom kits 6POT & RACING4 http://emojies.cocolog-nifty.com/emoticon/happy01.gif Caliper body is renewed at the beginning of this year, 6POT are becoming slimmer and lighter.
Caliper is part feature, of course, also has helped dress up the foot http://emojies.cocolog-nifty.com/emoticon/scissors.gif
http://luckstaff.cocolog-nifty.com/b...3/dscn9554.jpg http://luckstaff.cocolog-nifty.com/b...3/dscn9552.jpg
A black wheel, brake system, except gold, I - I will glory in it to black body http://emojies.cocolog-nifty.com/emoticon/good.gif
http://luckstaff.cocolog-nifty.com/b...3/dscn9563.jpg
http://luckstaff.cocolog-nifty.com/b...dscn9562_2.jpg
http://luckstaff.cocolog-nifty.com/b...3/dscn9559.jpg
It is sooo good to be tailored feel that I ride!

Try to experience the peace of mind that you also really Tomareru.
But ..... \ also be assured that will skip too (; ゚ ∇ ゚) /
Please note!
I also do not forget to say overwhelmingly shorter braking distance and safety as well as peace of mind ...

Is not it good ... brake overkill, but it is welcome who he did seem overkill to me but that.
Are you a good idea about shorter the braking distance I http://luckstaff.cocolog-nifty.com/p...3/emoji808.gif
It's also important to balance in sports driving,
There is also a matter of taste, so it please consult the feeling!

I was allowed to attached def def mount color mount and support the sport of El 86. I will sell well in the easy installation.
When you attach the mount support people to travel this sport because of the rear mount has always torn, suppression of the movement of the differential is of course, a significant increase in the durability of the mount bush genuine http://emojies.cocolog-nifty.com/emoticon/happy01.gif
http://luckstaff.cocolog-nifty.com/b...9/dscn9827.jpg
I was allowed to be seated classic metal catalyzer of SARD.
Located at the front of the catalyst in relation to the exhaust gas, the greater the resistance, more recent cars to spoil the performance.
Since the catalyst is attached to the exhaust manifold, 86 power loss more and more ...
Exhaust Manifold SARD less catalyst appeared soon, the second of SARD
Now also comes with a certificate so that it also supports inspection in the catalytic converter and mounting set.
Some people worry that is mounted ahead of the catalytic converter 2 already, so I can be put on after replacing the corresponding certificate.
I took the high-frequency field is much better from mid-range.
The item that I would stick to the aim Moapawa NA, want to come attached.
http://luckstaff.cocolog-nifty.com/b...9/dscn9891.jpg

Paper weight 86 ...
86 and a cool logo that is laser engraved crystal glass 5cm square http://emojies.cocolog-nifty.com/emoticon/lovely.gif
Such items or if the coveted 86 owner (o ^ - ^ o) Omission will be presented with a purchase more than $ 100 000 86 ... 86 product owner here this time.
There is no plan at the moment of sale.
Please forgive me, an amateur does not take pictures well, so Crystal http://emojies.cocolog-nifty.com/emo...ldsweats01.gif
http://luckstaff.cocolog-nifty.com/b...6/dscn0018.jpg
http://luckstaff.cocolog-nifty.com/b...6/dscn0023.jpg
Spot is beautiful as Swarovski http://emojies.cocolog-nifty.com/emoticon/sun.gif
Because there is a limited number on a first-come-first-served basis to

Us to study a little ...
I tried to disassemble the FA20 engine. http://luckstaff.cocolog-nifty.com/b...2/dscn9990.jpg

As you may know, up to now, horizontally-opposed engine was belt drive, chain drive is changed from type F.
Independent left and right chain
http://luckstaff.cocolog-nifty.com/b...2/dscn9983.jpg

Piston top is such a state to a engine that is not only riding several thousand kilometers.
It looks like this guys I gotta direct-injection engine.
http://luckstaff.cocolog-nifty.com/b...2/dscn9980.jpg

Although the oil pump are common, the shape of the gear is changed a little.
http://luckstaff.cocolog-nifty.com/b...2/dscn9973.jpg

I'm sorry, but I image you are a little blurred.
Also down the engine, gotta get off pretty easily, leaving the mission in this way.
Drop off in the rack, etc. This is how well Impreza ...
http://luckstaff.cocolog-nifty.com/b...2/dscn9991.jpg
I wonder if people do not appear to say you want to put the hand to the engine body quickly http://emojies.cocolog-nifty.com/emoticon/happy01.gif
Let's make about HKS supercharged 400PS vehicle to enhance engine ~ ヽ ('▽ `) /

Wow I didn't understand a word of that

Or the post a few above this one by Kunundrum. What is going on in here?

As I said, google translations aren't the best

Continuous the 2nd, Mars I am allowed to the installation of the oil cooler of freshly released http://emojies.cocolog-nifty.com/emoticon/scissors.gif Really sorry for those first rod is sold out for the time being, next time is I am waiting ... will be around at the end of the month now.
To apologize ...? I put out the image not in the instruction manual.
I and out of the blind in the thermostat near the lower radiator hose destination is taken out part of our products.
http://luckstaff.cocolog-nifty.com/b...1/dscn1146.jpg

It is it's a hole in the hex.
Remove this, and the replacement nipple as this.
http://luckstaff.cocolog-nifty.com/b...1/dscn1153.jpg
Blind cover is listed with the MT car cooler connections AT car, return side will be happy to replace our parts off it.
http://luckstaff.cocolog-nifty.com/b...1/dscn1158.jpg
I do not know to be a little hard to understand. . . I am sorry.


I Remove the mounting ... oil filter also simplifies core body.
http://luckstaff.cocolog-nifty.com/b...1/dscn1177.jpg

It is a core attachment there.
http://luckstaff.cocolog-nifty.com/b...1/dscn1194.jpg

That's all there is to this feeling.
It is the cooling performance of this simple and fairly.

Thus when it with an oil block, put a sensor of the meter such
Can be installed without interference to the hood You can use the short filter JURAN.
http://luckstaff.cocolog-nifty.com/b...1/dscn1169.jpg
My best regards because we offer good luck the number currently.

Just a little late now, but will be released engine oil cooler BRZ & 86 for the (MT only) finally. The Company, to come and continue to the test in the harsh Japan Rally from the vehicle previously released by mounting a water-cooled early than anywhere, it has led to the launch to see the effect and reliability.
To simplify the most processing in less design at all full bolt-on, mounting also can be mounted in a short time structure.
I think in order to pull out some of the cooling water, it takes a little time to get air bleeding the last, to be able to in about two hours the mounting itself.
Water-cooled, pre shorter warm air rise of oil temperature as early as compared to air-cooled,
In addition, it is possible to run at a temperature that is stable in all seasons because there is no over-cool in winter.
I think you believe that water temperature and the water temperature rise is pulled oil temperature goes up also come, but it also is stable at a level almost no problem.
In addition, it is the oil sensor attachment to be used when the oil temperature, the oil pressure gauge and the like mounted, but that it uses a thin conventional non-FA20 commercial Making use thin oil element, is mounted on the cooler core meter sensor also can be mounted.
http://luckstaff.cocolog-nifty.com/b...n1060_sjpg.jpg
※ The image cooler core is different from the product for the prototype.
More data graphically There is not, Larry, mini circuit Fuji Speedway, such as different is stable up to 120 ℃ at most tested in situations.
And running style, also used by oil, etc. Because it is (our test data
Changes)
It is a cheap price (including tax) · · · ¥ 52.500 to suppress much.

Product delivery will be mid-July.
Please note that take your time because there is so we have gotten a lot of reservations already.

It was somewhat slower but, VSC & TRC canceller delivery will start from early July finally. Feelings in the durability of the product, Nakano foundation also made of excellent domestic manufacturer, we have to improve the reliability.
VSC is becoming normal, and is canceled by holding down button, but not everything will be to cancel In fact, in sports driving, conditions that made it difficult to run intervention VSC is still are happening.
Full cancellation is possible in a separate way, but it has become a product that can be completely canceled with one button for quite troublesome.
http://luckstaff.cocolog-nifty.com/b...7/p6160744.jpg
You can easily attach relatively reduce the hassle of wiring can be part coupler on. Installation.
This thing that you run as I happily freely vehicle is excellent and can be ...
A switch with price is ¥ 16.800.
For Exclusively designed for competition, please do not use it in public roads.

Today, I was allowed to 86 attached to the direct plasma became a major say about a staple of the ignition system parts in recent years. Plugs exchange incidentally!
I think muffler black case of direct injection specific you talk also previously prompted the complete combustion of even more plasma direct this ... but is mitigated just plug replacement, that it might be headed in a better direction.
For effect, because it is part that you can experience enough from the past track record
86 also should obtain a sufficient effect.
http://luckstaff.cocolog-nifty.com/b...43562436_n.jpg
Image m that was received by the image of your FB (. ¯ ¯.) M vinegar Suimasen
In the Now, Mars and is wait for an order from you http://emojies.cocolog-nifty.com/emoticon/scissors.gif

We have a lot of attachment request of the oil cooler to say about what units Innovation must've put between about January here http://emojies.cocolog-nifty.com/emoticon/happy01.gif Stand ... I do not know what 10 units or attached yet? 20 units? More? ? ?
Oil cooler installation time is speed up considerably thanks to the staff http://luckstaff.cocolog-nifty.com/b...emoji803_3.gif
I put in the GVB! Today
http://luckstaff.cocolog-nifty.com/b...2/dscn0794.jpg
The water-cooled mounting it at BRZ today!
http://luckstaff.cocolog-nifty.com/b...2/dscn0792.jpg
It will be TRUST oil cooler mounted HKS oil cooler, in 86 BRZ yesterday, I was allowed to delivered http://luckstaff.cocolog-nifty.com/b...5/12/w01_2.gif
HKS, TRUST, CUSCO has received an order quite a lot in the main, still attached to ... continues ヽ ('▽ `) /

Request of pretty tough 86 & BRZ oil temperature rise and there are quite a lot of (. _.) Thanks

HKS has done it once again ... I was also introduced earlier manifold with catalytic converter.
GT-SPEC cheap
It seems tedious (but not be mounted that there is no equipment such as welding for the O2 sensor relocation ... http://emojies.cocolog-nifty.com/emoticon/smile.gif )
http://luckstaff.cocolog-nifty.com/b...3/04/04/86.jpg
· Introduced the set second catalytic converter of (front pipe) and exhaust manifold without catalytic converter that for the power-up further ... But, be R-SPEC time this is, as the inspection this is not the normal original muffler Because I do not ...
I take the person to say - It does not matter ...
http://luckstaff.cocolog-nifty.com/b...33005at006.jpg
http://luckstaff.cocolog-nifty.com/b...05at006_g1.gif
http://luckstaff.cocolog-nifty.com/b...05at006_g2.gif
http://luckstaff.cocolog-nifty.com/b...05at006_g3.gif
Huh? The no good Why? Those who think it too many to be or be stay ...
It becomes a long time to hear even talk tears and talk tears · · ·
The front pipe BRZ & 86, when you replace with the rear muffler for sound absorber is attached to the catalyst other than, as it was through the acceleration volume test a set pursuant to the provisions of the current, however, is no good to judicial.
Second catalyst even if the exhaust gas test with goods outside your muffler is also a car inspection current, to say that Innovation is there such thing to say in a combination of rose and useless.
We would either be introduced soon in the pages of manufacturers.
Sorry to those who have already muffler replacement, where
The HKS, I will release the muffler set of SPEC-L and R-SPEC.
Price will be released in the set price ¥ 312.900 whopping R-SPEC ¥ 207.900 + SPEC-L ¥ 126.000 = 333.900.


The Mmm not stop there! ! ! ! !
ECU rewriting tool that was introduced the other day what "flash editor" ¥ 73.500
The GT-SPEC · R-SPEC · R-SPEC & SPEC-L full set respectively + ¥ 31.500 a
Out will be sold as a package.
To hasten the person you are having you study for an order of flash editor rather similar is expected!
It is supposed to be outrageous When you are satisfied with your order situation of flash editor to the previous HKS http://emojies.cocolog-nifty.com/emo...ldsweats01.gif
If you would like to know more, please come to rack means.
Fart I will explain courteous (° ∀ ° F) Ahya

HKS flash editor BRZ & 86 for the long-awaited will be released in May. BRZ & 86 because the user looks a lot, towards all reservation With savings available all over the installation cost free.
It is also well enough to take home so you can work at your own of course, but please note that there is a time that you want to read by connecting the car unlike models of the past, initialized with the PC, install by connecting also the vehicle then.
Slightly higher price is ¥ 73.500 but, ECU of suspended
I think we certain it's worth a try because there is effective in tuning par http://emojies.cocolog-nifty.com/emo...ldsweats01.gif
Is not it absolutely this without wiring If you use 5-60000 yen to only speed limiter!
Because it is made to the data in correspondence with those who are replacing exhaust manifold and muffler and already I do not have a dream also measured over 200PS (o ^ - ^ o)
Because you be immersed in the image Product Description Please see ψ (`∇ ') ψ
The Ssho no choice but to give absolute shit anymore! ! !
As soon as possible today, there was a guide to each office of HKS, but because it seems there is a lot of orders already!
You have been ordered already in the rack, and I think that it is coming in the initial rod, but I do put a voice to hasten it looks so some people pretty much-awaited http://emojies.cocolog-nifty.com/emoticon/lovely.gif
Fun Truly ~ Well a Den (o ^ - ^ o)
http://luckstaff.cocolog-nifty.com/b...13/04/02/1.jpg
http://luckstaff.cocolog-nifty.com/b...13/04/02/2.jpg
http://luckstaff.cocolog-nifty.com/b...4/02/photo.jpg

I am sorry i didn't get the writing... maybe my english is so bad..

What is this flash editor? Is it works as ecu piggyback?

What's the wheel brand and size on it?
Thanks.