Yeah man everything came out fine, idk when i lift up the lever it twists slightly to the right, i had a shift knob stuck on there that wouldn't come out so i used a pipe wrench to get mor torque and it took a lot of pressure for it to come off so idk if i messed something small or i have to replace the whole thing :(

Oh, it's fucked. The lever is not solid down lower. It's hollow with a slot that houses the return spring for the lockout mechanism. You twisted it.

It's worth $170 bucks to remove the whole thing and see if you can repair it.

Do NOT try to twist it back while it's installed. The pin in the shift linkage is the only thing that keeps it from rotating. You absolutely don't want to damage that.

if under 35k gogo dealer forgot to mention

i can always buy a used shifter right ?

I can always buy a used shifter ? so what i messed up was the shifter not anything crazy serious

Yeah. The pin in the shift linkage is pretty stout but don't take any more chances. I still say take it out and try twisting it back. I bet it will be ok.

rekt ☐ not rekt ☑

Okay good cause i only have like 8k mikes on it an unfortunately this happen :( do you know how much a used stock shifter would cost?

take this chance and buy a short shifter lol
http://www.ft86speedfactory.com/kart...l#.Vjmv7vmrSHs

I can sell you my stock one for $50, but I need to see if I can find it first. it's somewhere in my garage. I'll look for it tomorrow. I'm in La Quinta

There u go! :cheers:

okay that sounds perfect :) I'm in palm desert !

Okay man sounds good :) yeah i live in palm desert! hopefully you can find it :D my luck has been really bad with my car these past few weeks :(

is this everything you need?
https://lh3.googleusercontent.com/-D...M=w557-h990-no

you might need to regrease the botton joint, but there's some extra grease left that I didn't use on my kartboy.

Yeah man thats everything that i need! is it easy to instal these? Ill pm you so you can shoot me a text