Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   GReddy EVO GT Cat-back Exhaust Review (https://www.ft86club.com/forums/showthread.php?t=93318)

mikool 09-05-2015 05:47 PM
Quote:
Originally Posted by Myth21 (Post 2381446)
Right, forgot there was a 3 lol
There was a lot of people talking about the drone on the EVO3 with catless headers, I'm pretty sure this was "fixed" to a degree on the GT as I don't have droning problems while paired with a Gruppe-S UEL catless header.

Myth21 09-05-2015 05:53 PM
Quote:
Originally Posted by mikool (Post 2381450)
There was a lot of people talking about the drone on the EVO3 with catless headers, I'm pretty sure this was "fixed" to a degree on the GT as I don't have droning problems while paired with a Gruppe-S UEL catless header.

Ya the EVO series were kinda farty, subtly obnoxious in a way lol..

mikool 10-23-2015 12:39 AM
Sound clip of my setup has been added to the last line of the first post.
**Note that it sounds different from your phone than on a computer speaker.

vividracing 10-23-2015 02:59 PM
Quote:
Originally Posted by Myth21 (Post 2381366)
Is this pretty much like the EVO2?
As others said, it's the new gen EVO3. Honestly, I LOVE GReddy exhausts. I ran an EVO on my last car ('13 WRX) and it garnered attention everywhere I went. I'm glad to see this exhaust is on par with the last.

-Seth

Atticus808 10-23-2015 04:18 PM
@vividracing @ mikool looking to purchase exhaust soon
it's between this and HKS Legamax Sport

for the EVO GT, does the exhaust come out pretty evenly? It looks to me that the flow to the right looks more natural. I just don't want 1 tip black and the other one shiney (OCD lol)

For the HKS, it looks like it flows evenly. am i making any sense? lol
http://ep.yimg.com/ay/yhst-848867813...ion-fr-s-2.gif

vividracing 10-23-2015 04:30 PM
Honestly, even though the flow isn't "even" I never noticed one tip getting dirtier than the other. If you're as OCD about your car as me, then you'll have it cleaned every week anyway so it's a non-issue :D

-Seth

mikool 10-24-2015 02:51 AM
@Atticus808 The measurements are the same, as for flow I'm not 100% sure but it def doesn't get "dirtier" than the other side. I hand wash pretty frequently so I don't ever let it build up, but from what I can see it's as even as it will ever get. Unless of course you don't plan on washing your car for several months then maybe there might be an issue.

ShadowReaper 02-05-2016 10:27 AM
Quote:
Originally Posted by mikool (Post 2356816)
Installation was very easy, took about an hour to put in as it was my very first time swapping a cat-back. Removing the OEM cat-back actually took the longest due to the hangars being really hard to remove from rubber mountings (took about 45mins). Installing the EVO GT was simple lego action and hangars slipped right in the rubber mounting. One other thing to note, probably mandatory to have a helper with you as some places are hard to reach while holding up the exhaust and trying to bolt/unbolt here and there.
Thank you for posting your experience with the GReddy Evo GT.

I am on the verge of purchasing one for my BRZ, after months and months of researching :sigh: . I love the grimy sound and is clearly high quality.

About the install, I have heard several people have problems with some bolts that were not the correct size for the fit. Did you have any problems with that?

Also does losing ground clearance, at any time, get in your way?

mikool 02-06-2016 05:47 PM
Quote:
Originally Posted by ShadowReaper (Post 2536851)
Thank you for posting your experience with the GReddy Evo GT.

I am on the verge of purchasing one for my BRZ, after months and months of researching :sigh: . I love the grimy sound and is clearly high quality.

About the install, I have heard several people have problems with some bolts that were not the correct size for the fit. Did you have any problems with that?

Also does losing ground clearance, at any time, get in your way?
I did not run into any problems concerning the bolt sizes. Getting it on for me was a breeze, only took about 15 mins with the help of my cousin.

ShadowReaper 02-06-2016 07:47 PM
Quote:
Originally Posted by mikool (Post 2538564)
I did not run into any problems concerning the bolt sizes. Getting it on for me was a breeze, only took about 15 mins with the help of my cousin.
Outstanding! I will probably purchase it by tomorrow, I found a place where I can use a lift as well so it is easier. Im preetty stoked.

mikool 02-06-2016 08:31 PM
Quote:
Originally Posted by ShadowReaper (Post 2538660)
Outstanding! I will probably purchase it by tomorrow, I found a place where I can use a lift as well so it is easier. Im preetty stoked.
That's good to hear :) Also I didn't even read the part in your last question about losing ground clearance. The only time where I have concerns is when I come across contruction areas and there are propped up manholes. I am also not lowered so for anyone that lowers their car I wouldn't do more than 1.5-2".

ShadowReaper 02-06-2016 09:04 PM
Quote:
Originally Posted by mikool (Post 2538680)
That's good to hear :) Also I didn't even read the part in your last question about losing ground clearance. The only time where I have concerns is when I come across contruction areas and there are propped up manholes. I am also not lowered so for anyone that lowers their car I wouldn't do more than 1.5-2".
Have you scratched the surface with the exhaust? I don't plan on lowering my car but I'll keep that in mind.

Is the sound noticeable? I am starting to find some disappointed people because it's apparently quiet.

mikool 02-11-2016 01:25 AM
Quote:
Originally Posted by ShadowReaper (Post 2538721)
Have you scratched the surface with the exhaust? I don't plan on lowering my car but I'll keep that in mind.

Is the sound noticeable? I am starting to find some disappointed people because it's apparently quiet.
I think I may have a little from a propped up manhole but other than that I haven't had a problem with scraping. Also I have never heard of anyone complaining that it's quiet :iono: this is probably one of the loudest catted exhausts you can get lol not sure if you've checked it out but I do have a sound clip of my setup, the last link on the first post.

ShadowReaper 02-11-2016 05:46 PM
Quote:
Originally Posted by mikool (Post 2543593)
I think I may have a little from a propped up manhole but other than that I haven't had a problem with scraping. Also I have never heard of anyone complaining that it's quiet :iono: this is probably one of the loudest catted exhausts you can get lol not sure if you've checked it out but I do have a sound clip of my setup, the last link on the first post.
Yea I've seen half the people I have questioned about the GReddy which it was louder. The only people that don't is the people that have modified other parts of the exhaust system, like yourself with that header.

I wanted something that will give me that growl right of the bat without doing anything else, that's why I went with Dezod.

:thumbup:


All times are GMT -4. The time now is 06:07 AM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.