Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 2 of 13 1 2 345612 Last »
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   BRZ/FRS AZ6 Manual Trans Upgraded Gearset (https://www.ft86club.com/forums/showthread.php?t=88757)

RockySDS 05-22-2015 10:03 AM
Couple more details for you guys, some of which you already have:
-1st - 6th Straight Cut Synchromesh Gearset
-Shift and drive like standard with a mild whine. “Due to the way that we manufacture the outbreaks they’re not terribly noisy due to the accuracy”
-All gears are case carburized heat treated & cryogenically treated & shot peened
-No extra cost for custom ratios, but comes with an 8 weeks lead time
-Non-custom gear ratio is close to stock

burdickjp 05-23-2015 12:58 AM
Quote:
Originally Posted by Poodles (Post 2258023)
It's supposedly a derivative. Case design doesn't really matter too much when it comes to their designations (L, G, W, R series transmissions each have variations that look quite different)


There's also been transmission shops that have torn both of them down and noticed the similarities.


Regardless, the AZ6 we have isn't the same as the other AZ6's out there anyway as it's also heavily modified.
For the longest time the S2000 wasn't on the list of cars:
https://web.archive.org/web/20071011...oducts/fr.html

From what I can tell of manuals, they're VERY different.

But, as you said, the big, important thing is parts interchange. Knowing what does and does not interchange is important.

Reaper 05-23-2015 02:18 PM
Quote:
Originally Posted by RockySDS (Post 2258454)
Couple more details for you guys, some of which you already have:
-1st - 6th Straight Cut Synchromesh Gearset
-Shift and drive like standard with a mild whine. “Due to the way that we manufacture the outbreaks they’re not terribly noisy due to the accuracy”
-All gears are case carburized heat treated & cryogenically treated & shot peened
-No extra cost for custom ratios, but comes with an 8 weeks lead time
-Non-custom gear ratio is close to stock
Who manufactures this?

FirestormFRS 05-23-2015 02:32 PM
Gears aren't cheap to make even for the big car companies. Custom sets are gonna be pricey but how many transmissions will you blow through before you hit that price?

Poodles 05-23-2015 04:16 PM
Keep in mind that a V160 new is $7K and that doesn't include the adapters and clutch to get it to work in this car.


If this can hold up to the abuse, it's really not that bad of a price...

cdrazic93 05-23-2015 04:28 PM
Im not sure if theres going to be many motors that will break this or even come close. I wonder if there could be a possibility for a less expensive set. Not a complete replacement, but 1-4.

Amaya 05-23-2015 04:47 PM
I guess in the long run this would be worth it but it's still pretty expensive. Glad to see stuff like this being made though, looking forward to seeing how it holds up.

Valentino 05-24-2015 03:46 PM
I was so excited... till i saw the price...

nelsmar 05-24-2015 04:04 PM
Quote:
Originally Posted by cdrazic93 (Post 2259995)
Im not sure if theres going to be many motors that will break this or even come close. I wonder if there could be a possibility for a less expensive set. Not a complete replacement, but 1-4.
Fuck that.... 3-5. :P

You likely wont have anywhere near enough tire to be damaging gears 1-2 on the street. Ask me why I know.

Spartarus 05-24-2015 04:13 PM
1 Attachment(s)
I would be all over it if I hadn't just heaped out money for turbo, custom oil cooling, and gauges... You know, if I hadn't just bought the very thing that's going to destroy my transmission and make me need this set.:burnrubber::cry::mad0260:

Reaper 05-24-2015 07:15 PM
.

cdrazic93 05-24-2015 08:40 PM
Quote:
Originally Posted by nelsmar (Post 2260726)
Fuck that.... 3-5. :P

You likely wont have anywhere near enough tire to be damaging gears 1-2 on the street. Ask me why I know.
I will make it have enough tire. How does R888's @ 355 sound?:D

Quote:
Originally Posted by Reaper (Post 2260865)
.
.

nelsmar 05-24-2015 09:48 PM
Quote:
Originally Posted by cdrazic93 (Post 2260952)
I will make it have enough tire. How does R888's @ 355 sound?:D



.
Good luck fitting that in the fender wells... Regardless it's not common to be putting heavy power down in the first two gears on a street car... Especially with only 2wd

cdrazic93 05-24-2015 11:26 PM
....radials. That is my response, lol


All times are GMT -4. The time now is 12:48 PM.
Page 2 of 13 1 2 345612 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.