Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Electronics | Audio | NAV | Infotainment (https://www.ft86club.com/forums/forumdisplay.php?f=27)
-   -   AU GT86 Rear view camera Plug-n-play on Canadian (Pioneer) navigation system ? (https://www.ft86club.com/forums/showthread.php?t=61660)

Simon99 04-17-2014 10:39 PM
Quote:
Originally Posted by FiRStsc10n (Post 1679887)
What about removing the keyhole mechanism and putting the camera and wire from there. You would just lose ability to open trunk with physical key incase vehicle battery died. But there is a way to get into trunk from interior removing pieces from seats, again this would only be done in emergencies anyway.

http://www.cars101.com/subaru/brz/brz13-keys3.jpg
Couls be an idea ! But wouldnt the camera angle be messed since the oem location is on the driver side ?

Sent from my SGH-I337M using Tapatalk

logoris 04-21-2014 02:17 PM
I have seen a few cameras over the plate bulb lense, no drilling needed

http://www.ebay.ca/itm/Car-RearView-...item5d46de615f

the light can even stay in

PNA 04-21-2014 02:31 PM
Interesting! Does anyone have any of these? And any photos of it set up? Also is it possible to disable the guide lines?


Sent from my iPhone using Tapatalk

Simon99 04-21-2014 02:50 PM
Quote:
Originally Posted by PNA (Post 1687397)
Interesting! Does anyone have any of these? And any photos of it set up? Also is it possible to disable the guide lines?


Sent from my iPhone using Tapatalk
Indeed id like to see the durability of a camera at such a low price, I know many of them dont even survive one wash

Sent from my SGH-I337M using Tapatalk

logoris 04-21-2014 03:14 PM
my idea is you pay that price for the lense and then just get a real camera for it.

Simon99 04-22-2014 02:31 AM
Quote:
Originally Posted by logoris (Post 1687522)
my idea is you pay that price for the lense and then just get a real camera for it.

I'd love to do that, but do you have an idea where I could buy a replacement for it ?

logoris 04-22-2014 12:34 PM
If you want a stock camera try subaru their cameras should all be the same. Or you could get the beatsonic one. I dont think toyota stock ones would work i believe all their systems are jvc not pioneer

Sent from my SGH-I717M using Tapatalk 2

go2brz 04-23-2014 06:29 PM
Subaru does not offer a backup camera for the BRZ. Just checked with them.

Simon99 04-23-2014 06:30 PM
Quote:
Originally Posted by go2brz (Post 1693275)
Subaru does not offer a backup camera for the BRZ. Just checked with them.
You checked regarding worldwide ? Or North america ?

Sent from my SGH-I337M using Tapatalk

logoris 04-23-2014 08:22 PM
Then i would go with bespoke or pioneer universal rear view camera

Sent from my SGH-I717M using Tapatalk 2

go2brz 04-24-2014 01:42 AM
It was actually US. I checked on Japanparts.com, but not available. I would love to have a Subaru made kit, but if not available I am going with the Rydeen Duo. Seems like the best quality and semi easy hookup.

I am looking forward to having better rear vision.....

If you know of somewhere else I should check i would be glad to know. But I dont really want a kit made for head units that are not the Fujitsu, as it seems like a more complex installation. But I would be glad to be proved wrong...

Simon99 04-24-2014 05:19 AM
Quote:
Originally Posted by go2brz (Post 1694167)
It was actually US. I checked on Japanparts.com, but not available. I would love to have a Subaru made kit, but if not available I am going with the Rydeen Duo. Seems like the best quality and semi easy hookup.

I am looking forward to having better rear vision.....

If you know of somewhere else I should check i would be glad to know. But I dont really want a kit made for head units that are not the Fujitsu, as it seems like a more complex installation. But I would be glad to be proved wrong...
Yeah thats the thing, u guys have the fujistsu but 2013 BRZ in canada have Pioneer

Sent from my SGH-I337M using Tapatalk

Skurj 04-24-2014 04:38 PM
I asked my local subie dealer and he said they could install one on my brz (fricken expensive at $250+1hr labour) but he didn't know what it looked like.

I am also watching for one that fits in the oem location and looks oem.. but I doubt doing it without drilling is possible from all the cams I have seen.


All times are GMT -4. The time now is 07:51 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.