Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Cosmetic Modification (Interior/Exterior/Lighting) (https://www.ft86club.com/forums/forumdisplay.php?f=36)
-   -   FRS turn signal mods (https://www.ft86club.com/forums/showthread.php?t=58532)

Knshro13 02-21-2014 02:03 AM
Quote:
Originally Posted by subiestyle (Post 1546475)
im a nub with this stuff.

what do you mean depin?

And is this reversible?
Totally reversible. What you do is unplug the turn signal harness (the three wire harness that connects to the actual bulb). Then take out the locks that hold the wires in the connectors (should be white plastic pieces). Then pull the green wire out. The green wire is what powers the parking lamp to stay on. Without that wire, it is simply a turn signal.

Andrew025 02-21-2014 02:13 AM
Quote:
Originally Posted by subiestyle (Post 1546475)
im a nub with this stuff.

what do you mean depin?

And is this reversible?
de-pin

subiestyle 02-21-2014 03:12 AM
Quote:
Originally Posted by Knshro13 (Post 1546481)
Totally reversible. What you do is unplug the turn signal harness (the three wire harness that connects to the actual bulb). Then take out the locks that hold the wires in the connectors (should be white plastic pieces). Then pull the green wire out. The green wire is what powers the parking lamp to stay on. Without that wire, it is simply a turn signal.
http://www.ft86club.com/forums/showthread.php?t=44066

would you say you follow these instructions for removing the pins?

subiestyle 03-06-2014 04:57 PM
Quote:
Originally Posted by zooki (Post 1537618)
I think the front turn signal bulbs are 7444NA. You can put a 7440NA bulb in its place and it will function as just a turn signal. This is what I did when I added the fog lamps.
so I tried installing 7440 turn signal bulbs in the front, but they would not fit.

maybe the monograms are wired differently for the front turn signals, or I didn't jam it in hard enough?

are the pinouts the same for 7444/7443/7440 bulbs?

zooki 03-07-2014 01:04 AM
Quote:
Originally Posted by subiestyle (Post 1579689)
so I tried installing 7440 turn signal bulbs in the front, but they would not fit.

maybe the monograms are wired differently for the front turn signals, or I didn't jam it in hard enough?

are the pinouts the same for 7444/7443/7440 bulbs?
This may help:
http://www.clublexus.com/forums/ligh...7740-bulb.html

subiestyle 03-07-2014 01:34 AM
I'll go ahead and remove the metal contact points for the parking lights filament. Which one would you reckon is it? Top or bottom filament?

http://i.walmartimages.com/i/p/00/04...77_500X500.jpg


All times are GMT -4. The time now is 04:23 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.