Can't wait to see them mounted! Love me some Advans, nice choice!

Alright, results are in. Alignment settings:

Front Camber: -2.0
Front Toe: 0
Rear Camber: -1.5
Rear Toe: A little toe in

Pics:

http://brz.ridedomain.com/passenger.jpg

http://brz.ridedomain.com/front_driver.jpg

http://brz.ridedomain.com/rear_driver.jpg

http://brz.ridedomain.com/front_passenger.jpg

http://brz.ridedomain.com/rear_passenger.jpg

http://brz.ridedomain.com/front_wheel.jpg

http://brz.ridedomain.com/rear_wheel.jpg

Needless to say, I am super happy with how they turned out. :D

So very, very nicely turned out... Looks like how a factory STi should look!

That's supremely badass, love the look.

So sexy!

Any fender work done?

Fitment is pretty legit

Just like @Jive Turkey , I rubbed in the rear where the bumper meets the fender. It took quite a bit of work to get it trimmed enough to not rub. I had a local guy roll both of my rear fenders just in case. The front is still all stock. I do rub the little lip in the fender behind the reflector with lots of steering angle if I load up the suspension, but anything other than U turns and pulling into tight parking spots it never rubs in the front.

That setup looks amazing. Nicely done!

Coilovers correct?

I am now on BC Racing coilovers yes.

Looks awesome man, great stance and fitment. Is 265 the widest you'd go on this current setup? Keeping the same height and alignment specs? Or could you go a bit wider?

No way would I go wider, but I am not the kind of guy that wants to run -3 degrees of camber or anything crazy. I am sure one of the narrower 275 width tires would work. I also had more inner strut clearance than I expected changing to the BCs, so I would think a 9.5 +45 might fit a 275 better.

Alright cool, thanks man. Keep the great mods comin!

Oh that fitment... :wub: