Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Electronics | Audio | NAV | Infotainment (https://www.ft86club.com/forums/forumdisplay.php?f=27)
-   -   Android Knockoff Headunit D.I.Y REQUEST (https://www.ft86club.com/forums/showthread.php?t=31561)

2forme 04-03-2013 12:18 PM

I have a knockoff that is supposedly capacitive coming in today. I hope it's better than the last one that was "capacitive" (was really resistive).

kharn83 04-04-2013 07:01 PM

hi guys

just wondering, with the install of the head unit, did u guys have to cut off the top bezel of the head unit to put the dash trim back in? if so, what did u guys cut it with, stanley knife? im guessing the bottom bezel doesnt need to be cut?

thx!
robert

Trashed675 04-04-2013 08:12 PM

Quote:

Originally Posted by kharn83 (Post 842244)
hi guys

just wondering, with the install of the head unit, did u guys have to cut off the top bezel of the head unit to put the dash trim back in? if so, what did u guys cut it with, stanley knife? im guessing the bottom bezel doesnt need to be cut?

thx!
robert

If you have to cut, youre doing it wrong. No cutting is required

kharn83 04-04-2013 10:12 PM

Quote:

Originally Posted by Trashed675 (Post 842410)
If you have to cut, youre doing it wrong. No cutting is required

thanks trashed675,

strange, it seems to fit in almost perfectly, other than my dash surround trim piece cant pass over the front of the head unit, its like the head unit is a few mm too tall and the trim cant be inserted where it normally sits. (thereby why i thought i could just shave a few mm off the head unit to allow dash surround to pass over it)

i'll have another look at my positioning of the head unit. thanks for the reply.

(btw i mounted the head unit using the original metal mounts that were on the side of the original head unit)

Cheers
Rob

2forme 04-04-2013 10:18 PM

@kharn83, You have to trim off the plastic "lip" on top and bottom for it to fit correctly.

BTW, I did manage to get my hands on a capacitive Ca-Fi knockoff. I'll be rooting it tomorrow and getting Torque running on it. :)

LAYGO 04-05-2013 02:49 PM

Quote:

Originally Posted by 2forme (Post 842699)
@kharn83, You have to trim off the plastic "lip" on top and bottom for it to fit correctly.

BTW, I did manage to get my hands on a capacitive Ca-Fi knockoff. I'll be rooting it tomorrow and getting Torque running on it. :)

Ebay? What seller?

I did buy a Parrot Asteroid though now that I know it can be rooted.

2forme 04-05-2013 03:14 PM

Quote:

Originally Posted by LAYGO (Post 844257)
Ebay? What seller?

I did buy a Parrot Asteroid though now that I know it can be rooted.

Tradesolution or something like that. The screen works very well. I'm about to head to the garage to root it :)

Trashed675 04-05-2013 04:08 PM

Quote:

Originally Posted by 2forme (Post 842699)
@kharn83, You have to trim off the plastic "lip" on top and bottom for it to fit correctly.

BTW, I did manage to get my hands on a capacitive Ca-Fi knockoff. I'll be rooting it tomorrow and getting Torque running on it. :)

I didn't have to trim anything off mine. It its a tight fit though, and there is a certain clunk when it gets seated.

2forme 04-05-2013 04:42 PM

Quote:

Originally Posted by Trashed675 (Post 844479)
I didn't have to trim anything off mine. It its a tight fit though, and there is a certain clunk when it gets seated.

Interesting. I had to trim both my resistive and capacitive knockoffs....

nzer 04-07-2013 04:55 AM

Quote:

Originally Posted by 2forme (Post 842699)
@kharn83, You have to trim off the plastic "lip" on top and bottom for it to fit correctly.

BTW, I did manage to get my hands on a capacitive Ca-Fi knockoff. I'll be rooting it tomorrow and getting Torque running on it. :)

Did you get Torque working with oil temp of the HU???


.

Narcoden 04-07-2013 07:21 AM

Quote:

Originally Posted by 2forme (Post 842699)
@kharn83, You have to trim off the plastic "lip" on top and bottom for it to fit correctly.

BTW, I did manage to get my hands on a capacitive Ca-Fi knockoff. I'll be rooting it tomorrow and getting Torque running on it. :)

If you wouldn't mind, can you share a link to the one with a capacitive screen? I may be forced to get one. Lol!

Sent from my Nexus 7 using Tapatalk HD

2forme 04-07-2013 08:47 AM

1 Attachment(s)
Quote:

Originally Posted by nzer (Post 847529)
Did you get Torque working with oil temp of the HU???

:word: See attached.

Quote:

Originally Posted by Narcoden (Post 847568)
If you wouldn't mind, can you share a link to the one with a capacitive screen? I may be forced to get one. Lol!

Sent from my Nexus 7 using Tapatalk HD

Here. They have a regular store online too, http://tradesolution.hk/

Narcoden 04-07-2013 09:00 AM

I see they make these with android 4.0 now.. I wonder if those have a capacitive screen. That would stuck me right in!

Sent from my Nexus 7 using Tapatalk HD

2forme 04-07-2013 09:03 AM

Quote:

Originally Posted by Narcoden (Post 847625)
I see they make these with android 4.0 now.. I wonder if those have a capacitive screen. That would stuck me right in!

Sent from my Nexus 7 using Tapatalk HD

The ICS ones are dual boot systems with WinCE for radio, ipod, and FM... and only using Android for Nav. It sucks because they have a hard time blending music and nav. The one I tried could only play audio from either android or wince, never both. And now, they aren't capacitive from what I've seen.


All times are GMT -4. The time now is 12:47 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.