![]() |
Judging from the picture, the differential (case at least) looks to be the same, or similar to the 205mm F20TX differential from the '01-05 IS300. The 208mm differentials used in some of the larger RWD Toyota/Lexus models have a much wider front mounting, and the IS F's differential case has significant external cooling fins. The 208mm (and older larger differentials like the 220mm in the JZA80), use a 3-bolt dampened pinion flange as well, while the 86 seems to be using the smaller, more common non-dampened 4-bolt design.
The 205mm differential is the same as the older Toyota 8-inch rear end used in cars like the A70 Supra, etc., so aftermarket differentials will likely be relatively easy to get right off the bat. Not that the T2 (if that's what it is) will be bad, I love the T2 I've got in my IS250. Here are a few pictures showing how similar this is to the F20 differential (both open and LSD) from the IS300/IS250: IS250 factory F20SX / FD20A Semi-Limited Slip Differential: http://jeff.epicwelding.com/is250/is...s300_lsd13.jpg IS300 F20TX / FD20AT Torsen T2 Limited Slip Differential: http://jeff.epicwelding.com/is250/is...is300_lsd9.jpg http://jeff.epicwelding.com/is250/is...s300_lsd16.jpg http://jeff.epicwelding.com/is250/is...is300_lsd1.jpg Using this Toyota differential is a good thing, this will take more abuse than most any owner will ever throw at it. Jeff |
I mentioned this in another thread, but Torsen only makes four models of differentials: T-1, T-2, T-2R (Racemaster), and T-3, and they are found in a wide variety of cars. The T-2 is found in the IS, LFA, Imprezza WRX STi, Genesis Coupe, the Mustang Boss 302, etc., and will be in the 86/BRZ/FR-S.
And for what it's worth: JTEKT Torsen is part of the Toyota Group. |
Quote:
Quote:
Quote:
Quote:
|
Quote:
|
Quote:
|
Quote:
|
from the motoiq article the state that its from a is300
|
Quote:
|
Wasn't the is300 transmission made of wet toilet paper over about 300 whp?
|
Even if it was, what does that have to with this thread?
Jeff |
Quote:
|
I personally loved Torsen overall, it had good performance and average usability. Much of my Torsen experience was from the FDrx7 and miata. But when it came to track days i found the clutch pack LSD in my FC was more suitable for the task.
|
It depends what kind of racing you're doing, IMO. I've driven quite a few of both types, in various cars and they all have their strong points. Road-racing with a Torsen is a delight though, which is why I put the T2 in my IS.
Torsens are great OEM LSD's, they're quiet and feature very smooth engagement. Especially for a Lexus, etc. they're perfect. I think most Toyota/Scion owners would appreciate that. Anyone else would likely want a differential with much more lockup, and would probably not care much for a smooth OEM-style clutch-type LSD anyway, and would look aftermarket anyways. I've got a TRD 2-way for my AE86, it's going to depend on what you want to do with this car, but with it being an existing Toyota differential, options will be relatively plentiful. I'm sure the A70 Supra guys are liking the fact that new options may soon exist for their cars as well. Jeff |
Quote:
|
| All times are GMT -4. The time now is 03:38 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.