Make it thinner and cut out the holes in the 86, ill take two please :)

Thanks guys :)

I've almost finished work for the year so I can put more pressure on the printers to get this right.. I've asked for a thinner version and want to get the rears ready to show ya'all

I would have liked to remove the toyota circle from the font badge but it's needed to anchor to the existing holes in the bonnet

If it doesn't look right then I will try a plain circle and will also try and distort the logo to fill the oval

M@!

Very creative!

Here's my version of a 3D printed 86 Badge. I really just did it for fun and practice. Having a subaru I have no desire to re-badge. I might have one chromed and stick it on the back.

I'm working on a few different 3D printed projects, as are others.
http://www.ft86club.com/forums/showt...ht=3D+printing

http://i1152.photobucket.com/albums/...psf400d823.jpg

Hey OP are you still working on a badge?

Not sure if this is still an active project or not, but I too have been wanting to re-badge my FR-S with something custom. I like where the OP was going with this and the additional suggestions that the badge be thinner and have the insides of the 86 cutout.
I'm not a vendor, and certainly don't want to break any forum rules, but I own a machine shop and would be willing to make some of these at my cost for a few people especially the OP. If anyone has any existing CAD files I'd love to take a look at them, as it would probably keep me from having to reverse engineer the stock emblem. Let my know your thoughts.