| geraldjust |
03-27-2023 10:48 PM |
Quote:
Originally Posted by Fender0122
(Post 3574176)
Ahhh perfect! I was starting to wonder if that's what was machined when I was looking at one of the pics, thanks for verifying that!
I even asked PTuning if they'd sell me just those two parts, they said no. They also said "by the way, you'll need to modify the pump" and wouldn't go into any further detail :lol: So that's what started me down this rabbit hole. Now to find a machinist!
|
a while back i wanted to do the same thing. but ended up buying a AVO kit. But as they do it, they mill down the mating side of the pump. they also enlarged the input thread of the pump too actually. i think it was a total of 4-5mm off the face.
EDIT:
ok! it was enough so that the face that the bolt goes into holding the pump together is almost touching the adapter plate. And the adapter plate bolts are countersunk. So adding those is what gives you enough room for the cup to touch the cam shaft. |
