Cedric’s 10 Series Build Thread
 

My friend took pictures of my car with the TC105s the other day, and they turned out pretty well.

https://uploads.tapatalk-cdn.com/202...b9300861aa.jpg

Additionally, I purchased a Tomei Type 80 catback from FTSpeed, and I got an email back from them saying that it would arrive in late September. I’m a little upset that it’s gonna take months for it to arrive, but it’s fine I guess.

Probably should have just bought solid mounts and did some maintenance in hindsight.

Did some maintenance at ~78,400 miles yesterday. Did an oil change and replaced the trans and diff fluid. I got ARP studs to replace the OEM ones and I got some Type 200 ATE Brake Fluid, but I still have do bleed my brakes.

https://uploads.tapatalk-cdn.com/202...0ddc9091a9.jpg

The pinch welds are really shitty I don’t know if that’s just my car, or if it’s just like that for every FRS.

I don't know what it is about the title of this thread but I just see this...

Great car, they are excellent taxis in Japan.


Sent from my iPhone using Tapatalk Pro

Decided to get new OEM Rotors and Winmax W3 pads. I was considering an even crazier compound, but I decided against it. Too bad the pads are in backorder for at least five more weeks.

https://uploads.tapatalk-cdn.com/202...4581eaa729.jpg

Cedric’s 10 Series Build Thread
 

I’ve seen people put stickers on the dash, but since have a electro-luminescent dash, I decided to not put any stickers there, but to instead put it on the glove compartment

https://uploads.tapatalk-cdn.com/202...c9e888766d.jpg

It’s not a real JDM OPTION sticker, but I wish it was

The pinch welds def get bent easily on our cars, and actually most cars that get set on cast iron stands. Some people prefer to roll their cars onto ramps instead of setting them on stands to do fluid changes. You can get rubber caps for your jack stands to prevent pinch weld damage, but once they are bent there's really little point.

Thanks for the advice. I’m getting some GKTech ramps once my next paycheck comes in.


Sent from my iPhone using Tapatalk Pro

No new updates with the car, but I bought A LOT of parts, but they won’t be coming for a few more months since everything is backorder because of COVID-19.

https://uploads.tapatalk-cdn.com/202...7ba52549ad.jpg

There’s not too many 86s in my area, but there is a clean E39 M5 that’s always parked next to my work place.


Sent from my iPhone using Tapatalk Pro

Cedric’s 10 Series Build Thread
 

Decided to just buy OEM pads for now, because there’s not much life left on my current pads, and my Winmax’s haven’t even shipped yet. I also plan replace both the front, and rear rotors, as well as bleed my brake fluid.

https://uploads.tapatalk-cdn.com/202...3299e793db.jpg

Might order Tomei unequals right now, since it might also be in backorder, and could take months for it to even ship.


Sent from my iPhone using Tapatalk Pro

I have the same Tomei knob, I love it. It feels so much better than the heavy stock knob!

Cedric’s 10 Series Build Thread
 

My build list so far. Yellow is everything that has to do with Maintenance, and Green is everything I’ve purchased. I’m missing a few things, but this should be everything I would like on the car, minus the Seibon Rear Seat Delete.

https://uploads.tapatalk-cdn.com/202...f8dcc11d65.jpg

Edit: I realized nobody can see it, but I will try to post another list that’s actually readable.


Sent from my iPhone using Tapatalk Pro

https://uploads.tapatalk-cdn.com/202...3ce2554460.jpg

https://uploads.tapatalk-cdn.com/202...fc6e6c04fc.jpg


Sent from my iPhone using Tapatalk Pro

Cedric’s 10 Series Build Thread
 

Finally wired my Valenti fourth brake lights. Somehow, I managed the wire the brake light to be an extension of my left taillight, but I managed to reverse the effects and spliced it to the correct connector.

https://uploads.tapatalk-cdn.com/202...fa64ff096c.jpg

It’s extremely bright.


Sent from my iPhone using Tapatalk Pro