FR-S Twin and myself, working on some other ideas. This weekend/next weekend should be interesting. We're looking at stage 2 and stage 3 on top of what we got.

nice work. how much would this run for

xcelir8brz, If you are building these for sale I would definitely be interested. Would it be possible to paint the couplers red (same red as Perrin's lightweight pulley) instead of black? If so, how much would I be looking at shipped?

Great mod and looking forward to your future projects! Cheers!

PM'd you!

Next weekend, I'll have time to fabricate a few more tubes.

I'll also be working with TBBandit (FR-S) to make a different intake system based on this design. What we will do is build a new extended pipe, connect it to the throttle body with a coupler, will be longer by a few inches towards the front of the car, then a 90 degree coupler on that towards the drivers side, a MAF adapter, then a cone filter. We will retain the front side of the stock airbox and will be putting a heatshield on the rear of the filter. This will pretty much encase the filter to have the stock CAI blow on it, and yet, provide a very deep growl and added horsepower. We've got all the raw materials inbound for this project next weekend. Thanks for the support!

PM'd you.

I also have not heard from the moderators or know the process to 'officially sell these public'. So any help to get this official and posted would be beneficial to everyone.

Thanks!

Intake Parts List
1-My Custom Finished Pipe w/Grommet
1-Rustoleum Bedliner Paint (or other)
1-Spectre 8791 Black 3" Low Profile 90° Elbow Boot with 2.5" Insert and Band Clamps
1-Spectre 8771 Black Intake Tube Coupler and Band Clamps

About $100/parts worst case cost w/shipping (including cost of my pipe) + time.

>>
1-Spectre 8791 Black 3" Low Profile 90° Elbow Boot with 2.5" Insert and Band Clamps
1-Spectre 8771 Black Intake Tube Coupler and Band Clamps
>>

$41 shipped to my door from Summit Racing. Add a can of paint and my pipe and you're done!

Did you use the 2.5" insert?

Nope.

K, just making sure. Thx

3 inch system through and through

I want one!!