It's funny you say that. A buddy of mine is getting ready to RF his but l don't think he's going Bi-Xenon. If he goes anywhere with this, l'll make sure he posts it. Good luck.

Photo links finally updated. Sorry it took me so long guys.

Earlier this year I swapped to BRZ headlights, so if anyone is looking for a complete RetroQuik setup (projectors, ballasts, brackets, bulbs, housing caps, and relay harness), let me know. If you're in the Richmond, VA area, I'd gladly assist with the install and take new, clearer pictures as well.

I'm not sure why my pics are no longer showing up again, but I'm in the process of moving and won't be able to fix them until next week some time. Sorry about that guys.

In the mean time, the photos are in this album:

https://www.flickr.com/gp/91414440@N02/783EZ4

Sent from my XT1095

Has anyone retrofitted D2S Morimoto projectors into Winjet headlights?
The wiring isn't self evident (to me anyway)
There are two brown (d-uh) wires going to the LED strip in the Winjets and off of that is red and black wires disappearing into the headlight housing.....
Sigh
I suck at modding

!!! UPDATE !!!

No-bake Winjet headlights and wiring for high beam info.
See my post here: http://www.ft86club.com/forums/showp...&postcount=453

Could the images be reuploaded please

So i realized I dont have the relay. Can I still get the high beam to work without the relay harness?

As long as you have the y-harness for the high beam plug you are good to go

Y harness, gotcha. So pretty new to this. Where do I get it (what type of connectors) and I am not sure which part would go where.?



Thanks

Retrofitsource.com email or call them and they'll tell you what you need.

Yay! installed and it all works!

what rubber cap size did you guys order?

There a DIY w/pics?

I can check to see if I've got any-

If OP gets me the images I can host them.

Anyone... Can reupload the picture?