Originally Posted by ichitaka05 (Post 19401)

Please! Swap a VG30DETT into S12 like this

[insane pic]

now put the joke on the side... S12 w SR20DET's do make awesome sound and drifting too

Originally Posted by MatadorRacing_F1 (Post 19442)

Lol, Hey, my younger brother has one of those. I bought it for him about 2 years ago. We are actually trying to work on a project and finish it up right now. SR20DE blacktop + turbo, S13 suspension front + rear, Z32 Brakes.

Originally Posted by MatadorRacing_F1 (Post 19443)

That's a lot of weight over and in front of the front axle.

Originally Posted by BoostJunkie (Post 19444)

Are y'all rebuilding the head? I got lots of pieces to sell if your intrestrested, never been taken out of the box

Originally Posted by MatadorRacing_F1 (Post 19583)

Mmmm, not going for very big power or revs, so i don't really see it as necessary. We got the motor out of an S15 Silvia.

Tell me more though, he might be interested.

Originally Posted by BoostJunkie (Post 19588)

Basically a full Tomei head, 270/270 tomei cams, tomei dual valve springes, tomei titanium retainers, tomei rocker arm stoppers & rockerarms the only thing that's not tomei is the valves and they are +1mm Brian crower, all it needs is shims and valve guides and lifters

Originally Posted by BoostJunkie (Post 19962)

Well it looks like from the looks of the other thread about the jap mag 54k, that they might be using an ej20 bottom end, what about swapping in an ej25 block? With a stroke to bring it to as close to 3.0 as possible.... Comments,b$tches,concerns,gripes????

Originally Posted by ichitaka05 (Post 19965)

So you're saying swapping the 2 Liter block to 2.5 Liter block and bore it out much as you can w 2.5 liter? IDK, I know a lot of 2 Liter STI owners prefer 2.2 upgrade more than 2.5. They say that 2.5 don't have the great response as 2... so they take the middle and go w 2.2. Have great response as 2 Liter and have nice low end tq as 2.5.

Originally Posted by BoostJunkie (Post 19967)

I'm saying put a 2.5 and stroke to A 2.7

Originally Posted by enjoi926 (Post 26741)

The first thing I'm going to do when I get my FT-86 is put my Holset boosted 3SGTE in it. I don't really care what its going to take to do it. I absolutely hate Subaru flat 4's. I think they are one of the most unreliable motors to deal with when modding.

We're building a V8 Turbo Corolla right now, I don't think the FT-86 should be too hard to do, the hardest part is going to be the wiring, but even then I have a full AEM EMS to run the car off of. -

The Donor Car :

[IMG][/IMG]
The Donor Motor:
[IMG][/IMG]

Unless my mind changes by the time this thing actually comes out, I'm set on doing this.