file size is 1,21 MB (1.277.952 Bytes) - something must be wrong i guess?


edit: the patcher says :
Error at Byte 0X066344 <0xd6 expected, 0f8 found>!


Does this say anything to you ?




as i said i am a noob and i would never touch the tune,.. just want that patch for the Launch control and flat foot shifting,... :/

see here for defs

http://www.ft86club.com/forums/showp...&postcount=186

links to defs in first post in this thread.

The D00G roms are different structure to A01G or A00G so unless patcher is suited to D00G is not going to work.

thank you, but it is the ZA1JD00G
i have ZA1JA00G ,..
can i use the ZA1JD00G Definition?


- attached a Picture,.. hope it works


ok Steve99 - so it won´t work until i get a right Definition for the ZA1JA00G - can´t find it anywhere :/

- can´t edit my post,..


or is there a way to get a update from my dealer and try again?


what came along with the ecuflash install was
ZA1JA01G.xml - does this work when i Change the Name and the 01 to 00 in the XML?

No you need to match the correct definitions to each ROM type else you will be in trouble.

Read the First post (several times) and understand what you are doing else its not going to end well.

The Ecuflash defs are here link was in the first post

https://github.com/TD-D/SubaruDefs/t...20standard/BRZ

make sure you have the updated 32bitbase file

https://github.com/TD-D/SubaruDefs/t...standard/Bases

If it all looks to hard suggest you buy an Openflash Tablet their tunes have the Launch and Flat foot shift included and tunes are free and its very easy to use just plug and play $500 all up.

I'm not trying to be nasty but an OFT is cheaper than a new ECU.
www.openflashtablet.com


.

no Problem,.. i understand you,...
i am just wondering why i can´t save it as a hex,... the error code seems to be my Problem - no matter of that 2 Gimmicks....updated everything still no luck.
i think we will upload the original file into the ecu again,...
maybe pulling it down again will solve the Problem - but i don´t think so ,...
thank you anyway for your commitment if someone maybe has a solution getting the right hex file,... pm me :(

one further question:


are all original ZA1JA00G files the same ?
I mean downloading the ZA1JA00G from a stock car - und uploading it to my ecu ,.. will this work ?


propably my tuner messed the original file some how ?

yes it will you can also update to A01G or D00G just need the def files for each.


you always get error message when you save an srf as bin or hex its normal

did not know that!


would you recommend updating ? to which one ? are These files hosted anywhere? what are the differences ?
- if this does not longer belong in here,.. then please hook me up with a pm :)

All the rom (stock) are attached at the end of the very first post in this thread or just click the tactrix link below , You can use which ever one you like p probably A01G is best the defs are tried and proven and it has transient ignition retard fix for DI injector seal problems, D00G is latest one but very new defs :D

Added ZA1JA03N MT Chinese ROM

A01J and K have the transient ignition retard update as well. Curious what the 2015 roms changed

Dantical - pm me, I'll help you patch it.