You can order the projector only or order the full kit. Full kit is really the way to go.

Sent from my SCH-I535 using Tapatalk 2

The mini H1s use a an H1 bulb, and the kit can be purchased with or without the ballast.

If you decide to use ballasts that you already have, you'll need to get new bulbs.

Sent from my Nexus 4

After many days of rain, sometimes quite heavy, I am happy to say I have no leaks. Next I will take it to the car wash to be completely sure.

oh ok thanks.. i saw on the site retro-quik is a bi-xenon projectors, correct? if so, is this the one with a hi/low beam function together?

Correct and correct.

oh ok. speedelement FRS in my local shop has the Bi-Xenon projectors hi/low beam, but its a D2S bulb. how is that compare to the mini h1 bulb? which is better?

My newest retrofit

http://i305.photobucket.com/albums/n...ps6c83c445.jpg

http://i305.photobucket.com/albums/n...psa3280531.jpg

http://i305.photobucket.com/albums/n...psd71c3bc5.jpg

Outstanding dual hid's

Very nice, info on projector in high beam location please!

http://www.ft86club.com/forums/showthread.php?t=33559

It's morimoto matchbox projector..

Which is better depends more so on which projector was used than which bulb type it takes.

In other words, I can't say which is better without knowing what projector was used.

Sent from my Nexus 4

wow I might have to get a set of those matchbox man that looks good

That quad HID with the matchbox looks outstanding! Was there any cutting to do or did it fit right in?

There was quite a bit of cutting.. The socket on the projector is bigger then the hole on the housing, so I had to dremel that then dremel it flush .. Basically cut off the stock lightbulb mounting point of the stock housing