Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1091 of 1773 « First 91591991104110811087108810891090 1091 10921093109410951101114111911591 Last »
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Scion FR-S / Toyota 86 GT86 General Forum (https://www.ft86club.com/forums/forumdisplay.php?f=2)
-   -   WHAT DID YOU DO TO YOUR FRS TODAY? (https://www.ft86club.com/forums/showthread.php?t=11036)

dejahboi 11-14-2016 08:08 PM
http://uploads.tapatalk-cdn.com/2016...548559c871.jpg

Got the Valenti installed today :D

Sent from my SAMSUNG-SM-G935A using Tapatalk

choiboie 11-15-2016 03:32 AM
http://uploads.tapatalk-cdn.com/2016...e77a9853ae.jpghttp://uploads.tapatalk-cdn.com/2016...c1d572784b.jpg
Picked up some 17x7.5 rpf1 for dirt cheap!
Mounted some comp2 a/s as a winter setup
17lb per corner I saved!!!! Rotiforms are HEAVY!!!

Sent from my SM-G928V using Tapatalk

Ashikabi 11-15-2016 08:08 AM
Quote:
Originally Posted by choiboie (Post 2796773)
http://uploads.tapatalk-cdn.com/2016...e77a9853ae.jpghttp://uploads.tapatalk-cdn.com/2016...c1d572784b.jpg
Picked up some 17x7.5 rpf1 for dirt cheap!
Mounted some comp2 a/s as a winter setup
17lb per corner I saved!!!! Rotiforms are HEAVY!!!

Sent from my SM-G928V using Tapatalk
Per corner?! Are the rotiforms made out of concrete?

Leonardo 11-15-2016 10:54 AM
Finally got my rear deck foamed and wraped. I think it turned out pretty good. The four way stretch vinyl matches the leather almost perfect.

http://www.ft86club.com/forums/pictu...ictureid=10702

D_Thissen 11-15-2016 11:08 AM
Swapped out the stock front rotors to DBA T2's. If anyone is planning on changing their rotors, do you self a favour. Go out and buy two M8x1.25 bolts so you can get the stock ones off lol.

Ashikabi 11-15-2016 11:17 AM
Quote:
Originally Posted by D_Thissen (Post 2796914)
Swapped out the stock front rotors to DBA T2's. If anyone is planning on changing their rotors, do you self a favour. Go out and buy two M8x1.25 bolts so you can get the stock ones off lol.
Good tip. I think I read somewhere the underbody panels are the same size if you forgot to buy screw

ichitaka05 11-15-2016 11:33 AM
Quote:
Originally Posted by Leonardo (Post 2796897)
Finally got my rear deck foamed and wraped. I think it turned out pretty good. The four way stretch vinyl matches the leather almost perfect.

http://www.ft86club.com/forums/pictu...ictureid=10702
Looks amazing! Is there write up or DIY thread? I'm interested how you did it.

Quote:
Originally Posted by D_Thissen (Post 2796914)
Swapped out the stock front rotors to DBA T2's. If anyone is planning on changing their rotors, do you self a favour. Go out and buy two M8x1.25 bolts so you can get the stock ones off lol.
Year too late lol

Somehow I had that spare bolt with me, so I didn't have to go get that bolt. (prob from previously owning Impreza)

Quote:
Originally Posted by Ashikabi (Post 2796805)
Per corner?! Are the rotiforms made out of concrete?
Prob made out of steel... cuz steel is heavier than concrete ;)

choiboie 11-15-2016 01:05 PM
Quote:
Originally Posted by Ashikabi (Post 2796805)
Per corner?! Are the rotiforms made out of concrete?
32lbs vs 15lbs wheels

Sent from my SM-G928V using Tapatalk

D_Thissen 11-15-2016 01:08 PM
Quote:
Originally Posted by ichitaka05 (Post 2796940)
Year too late lol

Somehow I had that spare bolt with me, so I didn't have to go get that bolt. (prob from previously owning Impreza)
Lol funny that you mention it. After swinging a rubber mallet for what seemed like an eternity, @Cole showed me the link of you using the two bolts. Apparently I liked the post also lol. Luckily I had two laying around in the tool box :lol:

guybo 11-15-2016 03:11 PM
Wahed it, spray wax by Garage 1. She looks purrrrdy

Sapphireho 11-17-2016 05:58 PM
1 Attachment(s)
Took out the bottom of the rear seat delete to do the semi annual cleaning of the rear window.

Sapphireho 11-17-2016 07:10 PM
1 Attachment(s)
Quote:
Originally Posted by D_Thissen (Post 2796914)
Swapped out the stock front rotors to DBA T2's. If anyone is planning on changing their rotors, do you self a favour. Go out and buy two M8x1.25 bolts so you can get the stock ones off lol.
I put on the DBA 4000s (I think that is what they call them). I don't remember needing anything but my fingers, but the car did have only about 3k miles.

go_a_way1 11-17-2016 07:20 PM
Lots of carbon fiber.

http://www.ft86club.com/forums/showt...=111847&page=6

Ignore all the other fun stuff in my buildthread, its more of a joke then anything else lol

D_Thissen 11-17-2016 11:19 PM
Quote:
Originally Posted by Sapphireho (Post 2799011)
I put on the DBA 4000s (I think that is what they call them). I don't remember needing anything but my fingers, but the car did have only about 3k miles.
Yeah mine had about 26000km on them :lol:


All times are GMT -4. The time now is 08:02 PM.
Page 1091 of 1773 « First 91591991104110811087108810891090 1091 10921093109410951101114111911591 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.