4) So I finally ended up with the one I have on now
- Cathode side going to DRL
- Anode side going Boomerang and Harness
- Result (Auto; Daytime): DRLs but no Boomerangs :/
- Result (Auto; Nighttime): DRLs, Boomerangs, HL

I'm very confused why #1 shouldn't work; even if I only worked on one side of the car (the driver side), it should still work on that one side. I really hope I'm wrong though and that two diodes are needed (left and right side) for this mod to work.

Any help is greatly appreciated guys. Also I have not worked on the passenger side yet, but the DRLs seem to work well on Both sides of the car, staying on all the time day and night. (just to note that again)

Hi Lithium, I posted this on the thread and I just wanted to ask you personally if you have a solution to this problem. Any help is appreciated. Thanks again

1) @TallTerror13 what you say is true and that is exactly what I did originally
- Cathode side going to DRL and Boomerang
- Anode side going to the Harness
- Result (Auto; Daytime): No DRLs and No Boomerangs

2) So I tried it without the diode and connected it directly to see
- Result (Auto; Daytime): Everything turned on; DRLs, Boomerangs, and HL

3) So then I decided to switch the wiring around to see if it works then
- Cathode side going to the Boomerang and Harness
- Anode side going to DRL
- Result (Auto; Daytime): Same as stock; just Boomerangs