Izzykiel boosted '15 (FRS)

[alvinrenz]

Meet Izzykiel, 2015 FRS. I bought her on July 4th of 2015. Six months later, I already have her at 25,xxx miles. There has been major mods in the car recently, so I decided to make a Jornal/build thread for her.


So far :


Engine/Drivetrain/Exhaust:
Invidia N1 Catback Exhaust
Rev Works GTX3076R Turbo kit
Turbo Garret 3076r
Rev Works SS Turbo Manifold
Rev Works SS 3" Downpipe (mates to 2.5" Over Pipe)
Turbosmart 45mm Hypergate Wastegate
Turbosmart Race Port Blow Off Valve
Rev Works Catch Can
K&N Intake Filter
Hallman Pro MBC
Turbo Blanket
Injector Dynamics ID1000 injectors
Mishimoto Slim Fan

Suspension/Brakes/Wheels:
BC Coilovers




here is she now.

[alvinrenz]

Day one! Jully 4th. fresh out of the dealership!









First modification is exhaust, Invidia N1



First Event, Martin Sports Car Club Autocross











Time to get low! Installed BC coilovers! It's a plus to have them here in Orlando locally! means no shipping wait!



















Took out her front bumper to smoke the headlight~ Took them out and bake em!






She is a lot meaner with the blacked out headlights! I did not paint the inner plastic where the high beam is located. so I still have my high beam at night.








I received a fog lamp conversion from a friend of mine, I installed it right away!

[alvinrenz]

So this is it! she is finally getting boosted!



I had a long study of which I want to get for the kit! This is the first time that I will do a turbo on a car! so I did make sure that I understand the logic behind forced induction and apply it when looking for a kit. I lean towards the Full Blown kit and Rev Works turbo kit, I read a tons of pages in different threads about Forced inductions to different kits and why they are good.

Full Blown and Rev Works are pretty much a similar kit but different in the piping where it was route. both of them offer the Garret GTX3076r kit. so there it is, I ended up getting the Rev Works!



the reason is they are local to me, They are in Orlando. I like supporting locals just like what I did with my BC. There is not a lot of write up about them hopefully I can make a video review and write up about their kit.



Here is the kit Shout out to Scott by putting this kit together as fast as 3 days!










The install is very straightforward. For someone that have never installed a turbo before, this is very easy. I had my friend help me to put it all together. It took us one day! it has to be one day since I daily drive my car to work.






L


After installing the kit, I had HRI tuning do the magic!

It is sitting down at 9psi right now with stock clutch and stock wheels/ tires.






hopefully soon we can crank it up to 12psi when I get the clutch and new wheels.

[alvinrenz]

I just hit a 1,000 miles on this turbo within two weeks😂 sorry I drive alot. Its still strong and clutch is still alive so far😊

Sorry for the CEL light, its P0103. MAF sensor reading higher than stock. I need visit my tuner to clear it and bypass