PERRIN Parts For Your BRZ & FR-S - Page 3 - Scion FR-S Forum | Subaru BRZ Forum | Toyota 86 GT 86 Forum | AS1 Forum

PERRIN · 06-05-2012, 08:58 PM

Quote:

Originally Posted by os86

How about a supercharger ? lol

ahausheer · 06-05-2012, 09:40 PM

What is that thing in the 4th picture on page 1 near the battery that looks like an air-filter? Is it the old air-filter? Or is it a prototype top mount intercooler that's just hanging out in the engine bay?

ahausheer · 06-05-2012, 10:11 PM

Quote:

Originally Posted by PERRIN

Positive Steering Response System ........ Details coming soon

Updated Super Steers?

PERRIN · 06-12-2012, 05:45 PM

PERRIN · 06-12-2012, 05:47 PM

PERRIN · 06-12-2012, 05:49 PM

PERRIN · 06-12-2012, 05:49 PM

Calum · 06-12-2012, 07:09 PM

Tried to buy a pulley, "The product option is not in stock". Cue the Fry meme.

german86 · 06-13-2012, 03:23 AM

@PERRIN:

Hi, i'm from germany and can't wait for the release of the Toyota GT86 in September

You guys must be very lucky... you can have fun with your new car and we have to wait until 15.09!!

I'm searching for some parts to improve my 86, would you please tell me, what the rear shift bushing is good for? And if this also fits the Toyota model?

Best regards Jörg

Neilus · 06-13-2012, 03:32 AM

Quote:

Originally Posted by PERRIN_ADAM

Thanks for asking! This is a very straightforward, nuts-n-bolts, DIY project. Simple handtools, follow the supplied instructions, and you are done.
No puller needed!

Thanks again! Keep any questions coming here, or via PM is always kool too!

Adam

Just a quick question, I know BMW over engineer their engines and putting on a mod pulley is no real problem. I understand that your product is a light weight version, does it under run at all. If so how much safety factor is there?

Apologies if this has already been answered.
Cheers.

Ranatsu · 06-13-2012, 03:14 PM

Quote:

Originally Posted by Neilus

Just a quick question, I know BMW over engineer their engines and putting on a mod pulley is no real problem. I understand that your product is a light weight version, does it under run at all. If so how much safety factor is there?

Apologies if this has already been answered.
Cheers.

It is not under driven at all. Perrin keeps the stock diameter on all of the Subaru pulleys. They are simply a lot lighter.

xcelir8brz · 06-14-2012, 03:31 PM

So I noticed the price for the pulley was reduced, but no availability shown as COMING SOON.

What gives?

Interested to purchase ASAP.

PERRIN · 06-16-2012, 04:54 PM

Quote:

Originally Posted by xcelir8brz

So I noticed the price for the pulley was reduced, but no availability shown as COMING SOON.

What gives?

Interested to purchase ASAP.

Sorry, It's too far out to start selling yet. keep a look out.....

PERRIN · 06-16-2012, 05:12 PM

BRZ / FR-S License Plate Holder

>>>>>> Available Now <<<<<<

CONSTRUCTION
The PERRIN BRZ/FR-S plate holder is made from laser cut plate aluminum which is texture powder coated in a wrinkle black finish. The tow hook adapter is CNC machined hex cut bar stock and anodized black for better corrosion resistance.

STURDY
The PERRIN BRZ/FR-S Plate holder is made of thick plate aluminum which is folded in a press break to add rigidity and eliminate any flex. It will not bend, flex or rotate like competitive parts.

HEIGHT AND ANGLE ADJUSTABLE
The PERRIN BRZ/FR-S plate holder can be adjusted up or down to get the exact look you want. Allows you to place the plate perfectly on your car regardless of bumper style or aftermarket light installation.

MOUNTS TO OEM FRONT TOW HOOK LOCATION
PERRIN's BRZ/FR-S plate mount attaches to the bumper through the front tow hook mounting location on your BRZ or FR-S. This tow hook mount supports the plate with out the need of any screws or fasteners which require holes in your bumper.

5 YEAR WARRANTY
PERRIN Performance warrants to the original purchaser, all PERRIN products to be free from defects in material and workmanship within a sixty (60) months period from the date of manufacture.

Click HERE To Check It Out Now

computertech01 · 06-18-2012, 07:24 PM

Quote:

Originally Posted by PERRIN

BRZ / FR-S License Plate Holder

>>>>>> Available Now <<<<<<

I now dub thee "Bow Tie" license plate holder. Just ordered mine for when my brz gets here in a couple months.

Moshpit37 · 06-20-2012, 01:53 PM

I'm seeing your pulleys popping up on ebay for sale. Is this legit?

I ask because your own website still says "Coming Soon" so I'm wondering if this might be a scam? Or a trusted dealer for you guys? They've got good ratings/feedback so I'm tempted but I'd rather cut the middleman and give you my money directly!

Slartibartfast · 06-20-2012, 08:57 PM

Quote:

Originally Posted by PERRIN

Positive Steering Response System ........ Details coming soon

How about a PCRS? (positive clutch response system)

PERRIN · 06-21-2012, 06:19 PM

Quote:

Originally Posted by Moshpit37

I'm seeing your pulleys popping up on ebay for sale. Is this legit?

I ask because your own website still says "Coming Soon" so I'm wondering if this might be a scam? Or a trusted dealer for you guys? They've got good ratings/feedback so I'm tempted but I'd rather cut the middleman and give you my money directly!

They may be up there as they have the information needed to sell and advertise them but we will not be shipping to anyone till Monday, June 25th.

Yes, Just Two Business Days!

PERRIN · 06-21-2012, 06:32 PM

BRZ / FR-S… What is the difference?

Click HERE for a full write up ... Below are some pics to look at.

http://blog.perrinperformance.com/wp...headlights.jpg

Click HERE for a full write up

xcelir8brz · 06-21-2012, 10:28 PM

link is off

xcelir8brz · 06-24-2012, 11:06 AM

Looks like they are now available? New release discount?

PERRIN · 06-26-2012, 10:21 AM

Quote:

Originally Posted by xcelir8brz

link is off

Fixed, thanks

06-05-2012, 09:40 PM	#46
ahausheer Re-member Join Date: Nov 2011 Drives: Toyota Sorara Location: South CA Posts: 990 Thanks: 96 Thanked 267 Times in 140 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	What is that thing in the 4th picture on page 1 near the battery that looks like an air-filter? Is it the old air-filter? Or is it a prototype top mount intercooler that's just hanging out in the engine bay? __________________ Nothing decays like progress, and nothing preserves like neglect.

06-12-2012, 05:45 PM	#48
PERRIN FT86Club Official Vendor Join Date: Apr 2012 Drives: BRZ Location: Hillsboro, Oregon Posts: 158 Thanks: 51 Thanked 100 Times in 49 Posts Mentioned: 30 Post(s) Tagged: 0 Thread(s)	PERRIN Performance Subaru BRZ / Scion FR-S new parts line up - YouTube

06-12-2012, 05:47 PM	#49
PERRIN FT86Club Official Vendor Join Date: Apr 2012 Drives: BRZ Location: Hillsboro, Oregon Posts: 158 Thanks: 51 Thanked 100 Times in 49 Posts Mentioned: 30 Post(s) Tagged: 0 Thread(s)	PERRIN BRZ with Exhaust & Front Pipe Driving Compilation - YouTube

06-12-2012, 05:49 PM	#50
PERRIN FT86Club Official Vendor Join Date: Apr 2012 Drives: BRZ Location: Hillsboro, Oregon Posts: 158 Thanks: 51 Thanked 100 Times in 49 Posts Mentioned: 30 Post(s) Tagged: 0 Thread(s)	BRZ Drive By PERRIN Cat Back Exhaust & Front Pipe - YouTube

06-12-2012, 05:49 PM	#51
PERRIN FT86Club Official Vendor Join Date: Apr 2012 Drives: BRZ Location: Hillsboro, Oregon Posts: 158 Thanks: 51 Thanked 100 Times in 49 Posts Mentioned: 30 Post(s) Tagged: 0 Thread(s)	PERRIN BRZ/FRS Exhaust Sound - YouTube

06-12-2012, 07:09 PM	#52
Calum That Guy Join Date: Dec 2011 Drives: 2013 asphalt FRS MT Location: Halifax, Nova Scotia Posts: 2,104 Thanks: 1,747 Thanked 1,070 Times in 572 Posts Mentioned: 22 Post(s) Tagged: 1 Thread(s)	Tried to buy a pulley, "The product option is not in stock". Cue the Fry meme.

06-13-2012, 03:23 AM	#53
german86 Member Join Date: Jun 2012 Drives: GT86(ordered), Avensis T22 Wagon Location: Germany Posts: 69 Thanks: 22 Thanked 16 Times in 12 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	@PERRIN: Hi, i'm from germany and can't wait for the release of the Toyota GT86 in September You guys must be very lucky... you can have fun with your new car and we have to wait until 15.09!! I'm searching for some parts to improve my 86, would you please tell me, what the rear shift bushing is good for? And if this also fits the Toyota model? Best regards Jörg

06-14-2012, 03:31 PM	#56
xcelir8brz Senior Member Join Date: May 2012 Drives: 2013 Subaru BRZ Limited Location: Chicagoland Posts: 955 Thanks: 44 Thanked 208 Times in 137 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	So I noticed the price for the pulley was reduced, but no availability shown as COMING SOON. What gives? Interested to purchase ASAP. __________________ My Mods & Pix: http://xcelir8brz.sqsp.com/

06-16-2012, 05:12 PM	#58
PERRIN FT86Club Official Vendor Join Date: Apr 2012 Drives: BRZ Location: Hillsboro, Oregon Posts: 158 Thanks: 51 Thanked 100 Times in 49 Posts Mentioned: 30 Post(s) Tagged: 0 Thread(s)	BRZ / FR-S License Plate Holder >>>>>> Available Now <<<<<< CONSTRUCTION The PERRIN BRZ/FR-S plate holder is made from laser cut plate aluminum which is texture powder coated in a wrinkle black finish. The tow hook adapter is CNC machined hex cut bar stock and anodized black for better corrosion resistance. STURDY The PERRIN BRZ/FR-S Plate holder is made of thick plate aluminum which is folded in a press break to add rigidity and eliminate any flex. It will not bend, flex or rotate like competitive parts. HEIGHT AND ANGLE ADJUSTABLE The PERRIN BRZ/FR-S plate holder can be adjusted up or down to get the exact look you want. Allows you to place the plate perfectly on your car regardless of bumper style or aftermarket light installation. MOUNTS TO OEM FRONT TOW HOOK LOCATION PERRIN's BRZ/FR-S plate mount attaches to the bumper through the front tow hook mounting location on your BRZ or FR-S. This tow hook mount supports the plate with out the need of any screws or fasteners which require holes in your bumper. 5 YEAR WARRANTY PERRIN Performance warrants to the original purchaser, all PERRIN products to be free from defects in material and workmanship within a sixty (60) months period from the date of manufacture. Click HERE To Check It Out Now

06-21-2012, 06:32 PM	#63
PERRIN FT86Club Official Vendor Join Date: Apr 2012 Drives: BRZ Location: Hillsboro, Oregon Posts: 158 Thanks: 51 Thanked 100 Times in 49 Posts Mentioned: 30 Post(s) Tagged: 0 Thread(s)	BRZ / FR-S… What is the difference? Click HERE for a full write up ... Below are some pics to look at. http://blog.perrinperformance.com/wp...headlights.jpg Click HERE for a full write up Last edited by PERRIN; 06-26-2012 at 10:20 AM.

06-21-2012, 10:28 PM	#64
xcelir8brz Senior Member Join Date: May 2012 Drives: 2013 Subaru BRZ Limited Location: Chicagoland Posts: 955 Thanks: 44 Thanked 208 Times in 137 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	link is off __________________ My Mods & Pix: http://xcelir8brz.sqsp.com/

06-24-2012, 11:06 AM	#65
xcelir8brz Senior Member Join Date: May 2012 Drives: 2013 Subaru BRZ Limited Location: Chicagoland Posts: 955 Thanks: 44 Thanked 208 Times in 137 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Looks like they are now available? New release discount? __________________ My Mods & Pix: http://xcelir8brz.sqsp.com/

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JDM Parts, Aero, Suspension , OE Parts	Carson Toyota	Exterior Parts (Aero, Lighting, Etc.)	39	10-16-2012 09:55 AM
Front License Plate Relocate Ideas from PERRIN	PERRIN_Jeff	Exterior Parts (Aero, Lighting, Etc.)	65	07-17-2012 11:33 AM
A little fun with the NAV from PERRIN	PERRIN_Jeff	Electronics \| Audio \| NAV \| Infotainment	46	06-20-2012 09:58 AM
BRZ for PERRIN is about an hour away!!	PERRIN_Jeff	Subaru BRZ General Forum	71	06-19-2012 08:01 PM
TRD parts	Pplater	Scion FR-S / Toyota 86 GT86 General Forum	21	05-24-2012 07:45 AM

User Name		Remember Me?
Password