|
Engine, Exhaust, Transmission Discuss the FR-S | 86 | BRZ engine, exhaust and drivetrain. |
|
Thread Tools | Search this Thread |
07-31-2012, 08:19 PM | #1 |
T1R 70R Power exhaust Prototypes !
Thank you for your patience. We have finalized the design for our 70R Cat-back single exhaust for the FRS and BRZ. I believe we are the first to offer an exhaust in 70mm on the market at the moment. We have tested 2.5" pipe and we hardly see any gains so we tested with the 70 and now we talking
The exhaust is built with stainless 70mm (2.75") piping, single resonator on b-pipe and with 101mm (4") exhaust tip. We built the exhaust with horizontal muffler for better sound quality while maintaining exhaust flow. The entire cat-back system weighs 26 lbs. Here we go Dyno test was performed with DYNOCOM (hub dyno) and all numbers are SAE corrected. Dynoed with 5th gear which is 1:1 ratio ! The 70R exhaust gained 2-3whp across the band and 5.4whp at peak. Now we will be finishing up building the over pipe and the secondary cat-delete pipe and we will hit the dyno again ! Here's the Video clip for the exhaust ! [ame="http://www.youtube.com/watch?v=_M58HG-gLSU"]http://www.youtube.com/watch?v=_M58HG-gLSU[/ame] Stay tuned ! Cheers, Ben @ AJR Last edited by AJ PwR; 08-03-2012 at 01:36 PM. |
|
The Following User Says Thank You to AJ PwR For This Useful Post: | Captain Snooze (07-31-2012) |
07-31-2012, 08:32 PM | #2 |
Banned
Join Date: Jul 2012
Drives: 2013 FR-S
Location: Bergen County NJ
Posts: 111
Thanks: 1
Thanked 30 Times in 16 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
If this was a dual outlet I would for sure buy it. Im not going to drive around with a big hole in my bumper without anything in it.
|
The Following 2 Users Say Thank You to j.t. For This Useful Post: | Jamifra (09-19-2012), MiguelAE86 (08-02-2012) |
07-31-2012, 09:12 PM | #3 |
Senior Member
Join Date: Jul 2012
Drives: 2013 Scion FR-S Whiteout
Location: Phoenix AZ
Posts: 1,406
Thanks: 116
Thanked 830 Times in 360 Posts
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
|
I was gonna say that the single outlet on this car just looks kinda silly. I'm sure there might be one or two body kits that might come out that would make a single outlet look good but as far as on the stock car people will just keep letting you know "Hey man, your exhaust fell off the left side of your car!"
Maybe you guys might be able to make a diffuser addon that would address that...just saying. |
07-31-2012, 10:01 PM | #4 |
Member
Join Date: Jul 2012
Drives: 2005 Mustang GT
Location: Los Angeles
Posts: 10
Thanks: 0
Thanked 4 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
I bet this sounds cool. Bring on the videos!!
__________________
|
07-31-2012, 10:22 PM | #5 |
Attack By Demons
Join Date: Feb 2012
Drives: 2022 BRZ (pre ordered)
Location: Riverside
Posts: 2,070
Thanks: 750
Thanked 440 Times in 254 Posts
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
|
man i'm actaully dissapointed in T1R they usally make some real nice exhaust systems with TI tip finish...also they look like a million bucks! but this single exhaust looks sad and weak...no offense just not my cup of tea...damn i'm sad
are you guys gonig to make any other designs?
__________________
#attackbydemons #imcomingbackbish
|
The Following User Says Thank You to 86design For This Useful Post: | bimmerboy (07-31-2012) |
07-31-2012, 11:04 PM | #6 | |
SW5 Driver
Join Date: Jul 2012
Drives: Asphalt FRS
Location: Ontario
Posts: 225
Thanks: 13
Thanked 76 Times in 30 Posts
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
07-31-2012, 11:16 PM | #7 |
Senior Member
Join Date: Jun 2012
Drives: 2013 hot lava FRS
Location: GTA
Posts: 142
Thanks: 3
Thanked 6 Times in 5 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
Had T1R 70mm dual on my S2000. Full aluminum cat-back and test pipe. Great quality, beautiful sound, love it so much, but if they make it a lot more quieter than what my S2000 had then would be awesome.
__________________
2013 FRS
2000 S2000 2004 RSX-S 2002 RSX |
The Following User Says Thank You to s2kdrew For This Useful Post: | MiguelAE86 (08-02-2012) |
07-31-2012, 11:16 PM | #8 |
Senior Member
Join Date: Jun 2012
Drives: truck and old car
Location: CA
Posts: 295
Thanks: 120
Thanked 168 Times in 66 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
sounds like it will be very productive, but it also looks as if something fell of the back of the car.
|
07-31-2012, 11:33 PM | #9 |
Senior Member
Join Date: Mar 2012
Drives: 2009 135i
Location: Midwest
Posts: 283
Thanks: 126
Thanked 74 Times in 43 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
why waste all those bends and have it exit to the right when you could have made it straight out from the left? boggles my mind
|
The Following 7 Users Say Thank You to bimmerboy For This Useful Post: | 86design (08-01-2012), chulooz (08-15-2012), Dimman (08-01-2012), EsoBOFH (08-02-2012), GenkiElite (08-15-2012), Godzilla35 (08-08-2012), Mr.Jay (08-01-2012) |
07-31-2012, 11:42 PM | #10 | |||
Because compromise ®
Join Date: Jan 2012
Drives: Red Herring
Location: australia
Posts: 7,720
Thanks: 3,992
Thanked 9,339 Times in 4,125 Posts
Mentioned: 60 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Quote:
Quote:
Function>form. Last edited by Captain Snooze; 08-01-2012 at 12:00 AM. |
|||
08-01-2012, 12:00 AM | #11 |
Senior Member
Join Date: Jul 2012
Drives: 2013 Scion FR-S Whiteout
Location: Phoenix AZ
Posts: 1,406
Thanks: 116
Thanked 830 Times in 360 Posts
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
|
Also just for giggles how bout you run a 3rd and 4th gear run so we can compare with the competition, who ran on 3rd and 4th. I'd also like a comparison just to see how big of a difference the power gains are vs. the ideal 1:1 ratio of 5th gear.
|
The Following User Says Thank You to Supermassive For This Useful Post: | MiguelAE86 (08-02-2012) |
08-01-2012, 01:55 AM | #12 | |
Attack By Demons
Join Date: Feb 2012
Drives: 2022 BRZ (pre ordered)
Location: Riverside
Posts: 2,070
Thanks: 750
Thanked 440 Times in 254 Posts
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
|
Quote:
i agree but they could of saved some more metal and weight by just having the exhaust come out from the driver side....instead of the passenger...i'm just saying...again this is just my 2 cents.....i've had a 350Z, Evo 10 and they all had a T1R exhaust system...so i'm not trying to put a great brand name into the floor...just saying im a little disappointment that's all... if you look at all there other products...you'll understand where i'm coming from.. http://www.typeoneracing.com/catalog/home.php?cat=71 still...... T1R I love your guys work...HELL i'm actually going to buy something from you guys next week lol
__________________
#attackbydemons #imcomingbackbish
|
|
The Following User Says Thank You to 86design For This Useful Post: | bimmerboy (08-01-2012) |
08-01-2012, 01:24 PM | #13 | |
ft86club resident b-boy
Join Date: Oct 2009
Drives: Yamaha R3, moonslate 2018 GT Black
Location: LA Area So Cal
Posts: 1,214
Thanks: 142
Thanked 208 Times in 101 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Quote:
any reason why you guys didn't go with the dolphin tip? heard a lot of good things about your exhausts and i for one am glad we have a quality single outlet option for best HP gains and best weight reduction. |
|
08-01-2012, 01:35 PM | #14 | |||||
Quote:
Quote:
Quote:
Quote:
Quote:
|
||||||
|
|
Thread Tools | Search this Thread |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
HKS hi-power spec L exhaust | prest1ge | Engine, Exhaust, Transmission | 15 | 10-12-2012 12:16 PM |
Agency Power Exhaust Thread PT II | vividracing | Engine, Exhaust, Transmission | 222 | 07-28-2012 12:52 AM |
Agency Power Exhaust for the BRZ/FR-S at Redline360 | Redline360 | Engine, Exhaust, Bolt-Ons | 5 | 07-23-2012 11:57 PM |
Agency Power Exhaust | vividracing | Engine, Exhaust, Bolt-Ons | 17 | 07-23-2012 02:40 PM |
Agency Power Exhaust | Best Price Anywhere | IslandImportPerformance | Engine, Exhaust, Bolt-Ons | 13 | 07-21-2012 10:50 AM |