OFT Stg 2 E85

[drjazzenstein]

Was looking at adjusting the cranking tables for the V4.03 e85 OFT map to try to get the car to start on the first crank(having to crank a couple times even at ~70-80 degrees is annoying) and noticed that the Cranking table F appears to have the incorrect temperatures. Can anyone else verify this error in their tune as well? And what do the different cranking tables reflect, e.g. A-F?

Also, as I'm new to using rom raider, I have a question that someone can hopefully answer. Do I need to edit the ecuid, year, market, make, model in the xml file or is that corrected once I save the new .bin file?

[elBarto]

Yes, indeed the F one is incorrect (good catch).
This is mine:


Do not edit it because you can brick your ECU.
Your definition is probably an old one.
I've attached a more recent one for you.
Don't worry about make, model, etc in the xml, it's just cosmetic.

V4 B01C
Only use for the V4 tunes, do not use them for opening the old V2 tunes

[drjazzenstein]

Thank you for the definition file. I loaded the tune using the xml you linked and it corrected the cranking pulse width table(as well as adding tables G-J, which were missing previously)

The tune and xml definition file I was using were downloaded from OFT website at the same time, about 4-6 weeks ago. Is it a concern that the provided xml file was incorrect when used to read the .bin image?

[elBarto]

Originally Posted by drjazzenstein

Thank you for the definition file. I loaded the tune using the xml you linked and it corrected the cranking pulse width table(as well as adding tables G-J, which were missing previously)

The tune and xml definition file I was using were downloaded from OFT website at the same time, about 4-6 weeks ago. Is it a concern that the provided xml file was incorrect when used to read the .bin image?

Reading isn't a problem, it's editing an incorrect table that's dangerous.