Kraftwerks Supercharger Owners Thread

[Taino-BRZ]

Originally Posted by beemer

who has the Kraftwerks c30, tuned, and has gotten a time slip. I'm running tuned at 281whp with the SC and isis over pipe back (with resonator).

last night I ran it 5 times, and my best time was a 14.05.

and this is on factory tires, so I know I could have cut my time down with better tires.

let me know what you have done!

Sent from my SM-N900P using Tapatalk

I did 12.6 at 115mph c30 e85 high boost.drag radials

[FirestormFRS]

@KraftWerks when can we see the numbers the car makes with the CARB tune

[KraftWerks]

Originally Posted by FirestormFRS

@KraftWerks when can we see the numbers the car makes with the CARB tune

We should have the vehicle back from their facility shortly and will re-dyno on the tune to show exactly what the test vehicle is making. - CJ

[CSG Mike]

Originally Posted by KraftWerks

We should have the vehicle back from their facility shortly and will re-dyno on the tune to show exactly what the test vehicle is making. - CJ

Is your CARB tune different from the ones that went out with your kit in the past?

[zoth]

Originally Posted by mit_peid

These are the steps I took:
1) remove the pipe going into the intake manifold to make room
2) take the cover off of the KW plate
3) disconnect the inlet/outlet of the Rotrex traction lines (tie them together out of the way temporarily with an adapter so they don't leak)
4) loosen fasteners going into and out of the Rotrex blower
5) remove tensioner pulley
6) remove 4 bolts (2 on the Y, and 2 small ones on the bottom right) from the KW plate, keeping the single large bolt on the left

Now you can rotate the Rotrex assembly counterclockwise on that single large bolt, dislodging from the urethane charger piping, and replace your belt.


Sent from my iPhone using Tapatalk

As he said doing this.

[FirestormFRS]

Oil temp question. I was seeing 110c. Decided to wrap my header with the hope that would lower the temp down. I'm seeing 107c now. This is normal interstate driving in mid 80's high humidity day.


To oil cooler or not that is the question.

[KraftWerks]

Originally Posted by CSG Mike

Is your CARB tune different from the ones that went out with your kit in the past?

Yes.
Some have the original Delicious tune and some have already received the revised tune which is what went to CARB. Shoot some have standalone tunes from the various tuners out there for the platform.

[zoth]

Originally Posted by FirestormFRS

Oil temp question. I was seeing 110c. Decided to wrap my header with the hope that would lower the temp down. I'm seeing 107c now. This is normal interstate driving in mid 80's high humidity day.


To oil cooler or not that is the question.

I'm in TX around 98 degrees my Temps are around 236 to 244 f but after the my oil cooler installed I'm around 204 to 208 at the same temp. and using using Evans waterless coolant. Also have Mishimotos racing thermostat.

Sent from my SM-N900T using Tapatalk

[Wingnut537]

add me to the list . Ordered my C38 kit this morning

[rj101592]

Got my kit installed this past weekend. Loving it so far! C30 kit, put down 311 whp and 221 tq. Only issue is that it seems as though I will need to purchase the raceseng cam plate... as I am running into the famous problem of leaking oil from the stock one. Pump gas, 93 octane.

[Triumphrider]

I run the c38 on the moto East tune.... Love it!

[THE_FRS_KID]

Originally Posted by rj101592

Got my kit installed this past weekend. Loving it so far! C30 kit, put down 311 whp and 221 tq. Only issue is that it seems as though I will need to purchase the raceseng cam plate... as I am running into the famous problem of leaking oil from the stock one. Pump gas, 93 octane.

What other mods do you have? How much boost? What size pulleys?

[KraftWerks]

Originally Posted by rj101592

Got my kit installed this past weekend. Loving it so far! C30 kit, put down 311 whp and 221 tq. Only issue is that it seems as though I will need to purchase the raceseng cam plate... as I am running into the famous problem of leaking oil from the stock one. Pump gas, 93 octane.

Impressive POWA!

[rj101592]

Originally Posted by THE_FRS_KID

What other mods do you have? How much boost? What size pulleys?

Tomei UEL header, berk overpipe/catted midpipe, invidia N1 catback and a national speed tune. 13psi. Not sure what size pulleys.. whatever came with the c30 kit.