2013 White Turbo FR-S (450whp) (Update) (For Sale Again) - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Synack · 12-13-2013, 11:41 AM

My fair asking price - $27,000. 29k miles on chassis. 5000 miles on 2015 motor.
I should mention that I am accepting very few trades. MK4 Supra/FD RX7.

Call or text or PM - 404-323-I595

This car runs on 2 tunes currently, with a switch to change between them.
Tune 1: 340whp on 93 at 11psi (Subject to change with new motor)
Tune 2: 445whp on E85 at 20psi (Subject to change with new motor)
And because it's flex fuel it will easily run on any combination in between full 93 and E85.

Let's start with the mods list.

The original motor was replaced with 2015 version and 5000 miles (happening next week, zero boosted miles on the motor).
Full Five Axis body kit and wheels. S5:F wheels, 19x8.5 and 19x9.5.
Winjets with 5000K HID's, mostly white with a tiny bit of blue.
ACT heavy duty clutch
Custom turbo test pipe to connect to the Magnaflow 2.5" catback
Sirius XM module installed on the BeSpoke touchscreen radio

Turbo Kit Parts and Mods:
Dyno tuned at DBW Motorsports by the Master, Doug.
Turbo - Precision 5558 T3 4 bolt .63AR (only 1000 miles on it right now)
Moto East Flex Fuel E85 kit
FBM 485 fuel pump kit.
Agency Power header
Tial MVR 44 wastegate
Tial Q50 BOV
All D3PE aluminum IC piping w/ 4ply couplers and T-bolt clamps
D3PE intake with K&N air filter
D3PE 304L schedule 10 stainless up-pipe
D3PE 304L 2.5" Downpipe
D3PE 304L 1.75" Dumptube
D3PE 304L 2.5" Cat delete test pipe
D3PE Stainless oil feed and return kit
D3PE Vacuum distribution box
D3PE 600HP Intercooler (26" wide x 6.5" tall x 3.5" deep) -biggest you can fit with a bumper support-
D3PE Heat Shield
D3PE FRS/BRZ plug and play 4bar map sensor
Fuel Injector Clinic EV14 650cc injectors

CajunFRS · 12-13-2013, 11:44 AM

Nice car, ever run it down the 1/4?

Synack · 12-13-2013, 11:49 AM

Quote:

Originally Posted by CajunFRS

Nice car, ever run it down the 1/4?

You know I've been trying to but by sheer bad luck, every time my car was ready to go (and I wasn't busy) to the Atlanta dragway they were either canceled for that particular Friday or right now they are closed for winter. I expect high 11's (with driver mod) just by the way it pulls and the cars/bikes it's had runs with.

CajunFRS · 12-13-2013, 11:58 AM

Quote:

Originally Posted by Synack

You know I've been trying to but by sheer bad luck, every time my car was ready to go (and I wasn't busy) to the Atlanta dragway they were either canceled for that particular Friday or right now they are closed for winter. I expect mid/high 11's (with driver mod) just by the way it pulls and the cars/bikes it's had runs with.

GLWS man badass car. I've read somewhere that you where supposed to do the 1/4. I've been wondering how the D3 kit runs. I didn't even know you had a built bottom end. I'd buy this car if i hadn't just spent 6k+ on Christmas and got my FRS a few months ago.

Ahhh its so beautiful!

Synack · 12-13-2013, 11:59 AM

Quote:

Originally Posted by CajunFRS

GLWS man badass car. I've read somewhere that you where supposed to do the 1/4. I've been wondering how the D3 kit runs. I didn't even know you had a built bottom end. I'd buy this car if i hadn't just spent 6k+ on Christmas and got my FRS a few months ago.

Ahhh its so beautiful!

Haha nice. And I just drove through LaFayette recently too!

CajunFRS · 12-13-2013, 12:02 PM

Quote:

Originally Posted by Synack

Haha nice. And I just drove through LaFayette recently too!

Shit, I'd gave a kidney to ride around and see how it pulls. Just got a 25% raise at work. My gf will kill me if i buy another car before she gets a ring.

Synack · 12-13-2013, 12:15 PM

Quote:

Originally Posted by CajunFRS

Shit, I'd gave a kidney to ride around and see how it pulls. Just got a 25% raise at work. My gf will kill me if i buy another car before she gets a ring.

Well I don't want to turn this into a super chatty thread, but I do want to mention that I just read an article on how a PUPPY can be a decent substitute for a ring.... lol. But that's Yahoo for ya.

Synack · 12-23-2013, 06:32 PM

Accepting PM's with offers

Also lowered price.

Looking to sell soon because I am looking into a different platform.

86-tundra · 12-29-2013, 08:09 PM

GLWS on a great car, would have seriously considered this before buying mine

cobrabyte · 12-30-2013, 10:27 AM

So, I gotta ask..... why are ya selling it?

Synack · 12-30-2013, 12:30 PM

Quote:

Originally Posted by cobrabyte

So, I gotta ask..... why are ya selling it?

Going with a different project route, currently Honda S2000 with LS2 is at the top of my list.

Synack · 12-30-2013, 12:30 PM

Quote:

Originally Posted by trevorovert

GLWS on a great car, would have seriously considered this before buying mine

Ah man, so close!

Mr. · 12-30-2013, 07:32 PM

GL with the sale BUMP~

Outlawstar98 · 12-31-2013, 02:48 PM

Quote:

Originally Posted by Synack

Going with a different project route, currently Honda S2000 with LS2 is at the top of my list.

Thats what my friend is currently doing lol

12-13-2013, 11:41 AM	#1
Synack Boosted Join Date: Jul 2012 Drives: Sideways Location: Atlanta Georgia USA Posts: 2,377 Thanks: 388 Thanked 716 Times in 414 Posts Mentioned: 25 Post(s) Tagged: 0 Thread(s)	2013 White Turbo FR-S (450whp) (Update) (For Sale Again) My fair asking price - $27,000. 29k miles on chassis. 5000 miles on 2015 motor. I should mention that I am accepting very few trades. MK4 Supra/FD RX7. Call or text or PM - 404-323-I595 This car runs on 2 tunes currently, with a switch to change between them. Tune 1: 340whp on 93 at 11psi (Subject to change with new motor) Tune 2: 445whp on E85 at 20psi (Subject to change with new motor) And because it's flex fuel it will easily run on any combination in between full 93 and E85. Let's start with the mods list. The original motor was replaced with 2015 version and 5000 miles (happening next week, zero boosted miles on the motor). Full Five Axis body kit and wheels. S5:F wheels, 19x8.5 and 19x9.5. Winjets with 5000K HID's, mostly white with a tiny bit of blue. ACT heavy duty clutch Custom turbo test pipe to connect to the Magnaflow 2.5" catback Sirius XM module installed on the BeSpoke touchscreen radio Turbo Kit Parts and Mods: Dyno tuned at DBW Motorsports by the Master, Doug. Turbo - Precision 5558 T3 4 bolt .63AR (only 1000 miles on it right now) Moto East Flex Fuel E85 kit FBM 485 fuel pump kit. Agency Power header Tial MVR 44 wastegate Tial Q50 BOV All D3PE aluminum IC piping w/ 4ply couplers and T-bolt clamps D3PE intake with K&N air filter D3PE 304L schedule 10 stainless up-pipe D3PE 304L 2.5" Downpipe D3PE 304L 1.75" Dumptube D3PE 304L 2.5" Cat delete test pipe D3PE Stainless oil feed and return kit D3PE Vacuum distribution box D3PE 600HP Intercooler (26" wide x 6.5" tall x 3.5" deep) -biggest you can fit with a bumper support- D3PE Heat Shield D3PE FRS/BRZ plug and play 4bar map sensor Fuel Injector Clinic EV14 650cc injectors __________________ *Nismo 370Z 300whp -> FR-S Turbo 450whp on E85 -> Z06 Corvette 500whp* Last edited by Synack; 07-08-2015 at 03:04 PM.

12-23-2013, 06:32 PM	#8
Synack Boosted Join Date: Jul 2012 Drives: Sideways Location: Atlanta Georgia USA Posts: 2,377 Thanks: 388 Thanked 716 Times in 414 Posts Mentioned: 25 Post(s) Tagged: 0 Thread(s)	Accepting PM's with offers Also lowered price. Looking to sell soon because I am looking into a different platform. __________________ *Nismo 370Z 300whp -> FR-S Turbo 450whp on E85 -> Z06 Corvette 500whp*

12-30-2013, 07:32 PM	#13
Mr. Supra Senior Member Join Date: Oct 2012 Drives: AE86 & BRZ Location: Merica maryland Posts: 877 Thanks: 717 Thanked 491 Times in 288 Posts Mentioned: 38 Post(s) Tagged: 2 Thread(s)	GL with the sale BUMP~ __________________ Build Thread YouTube Channel IG - Fwankyhong Subscribe

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
D3PE FRS/BRZ KLR Turbo System	ANTI_LAG	Forced Induction	187	01-21-2014 03:39 PM
Official FA20CLUB Turbo Kit FAQ Discussion	FA20Club.com	Forced Induction	67	01-09-2014 12:06 AM
Introducing the D3PE "KLR" turbo system...	Evan@D3PE	Forced Induction	25	06-15-2013 01:24 PM
Another D3PE KLR Turbo System Done!	ANTI_LAG	Forced Induction	36	01-08-2013 03:56 PM
Forced Induction Kits Putting Out Around 300-350Whp	SalM	Forced Induction	13	11-05-2012 02:07 PM

12-13-2013, 11:44 AM	#2
CajunFRS Senior Member Join Date: Aug 2013 Drives: Challenger R/T, CRX SI, Location: Lafayette,LA Posts: 359 Thanks: 87 Thanked 92 Times in 67 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	Nice car, ever run it down the 1/4?

12-29-2013, 08:09 PM	#9
86-tundra Troll Hunter Join Date: Aug 2013 Drives: fr-s, tundra Location: Somewhere Posts: 1,424 Thanks: 1,695 Thanked 922 Times in 470 Posts Mentioned: 39 Post(s) Tagged: 0 Thread(s)	GLWS on a great car, would have seriously considered this before buying mine

User Name		Remember Me?
Password