What's the best setup to learn

[CSG Mike]

Originally Posted by cmiovino

Can confirm of the PP Brembos make a ton of noise with DS2500 pads.

CRC's brake disc quiet was what was recommended by our autocross guys locally. I used the spray version and it quieted them down from April until October. Had to reapply heavily again this year in April after storing the car.

I've heard this is the case with any even semi-track oriented pad and the Brembos. OEM pads didn't make any noise at all.

The brake grease and spray that quiets things down burns off when you get things track temp hot, and the noise comes back very quickly. At street and AutoX temps, it'll work great and should be a solid short term solution.

[2.2Lude]

Originally Posted by CSG Mike

The brake grease and spray that quiets things down burns off when you get things track temp hot, and the noise comes back very quickly. At street and AutoX temps, it'll work great and should be a solid short term solution.

Just curious if there are any high temp greases that you would recommend?

[CSG Mike]

Originally Posted by 2.2Lude

Just curious if there are any high temp greases that you would recommend?

I've not found anything that survives track temps. Street temps, pretty much anything works that is designed to quiet brakes.

[ruturaj001]

I guess if one is swapping pads for track and road, one can spray every time putting street pads. It's more of issue for someone like me who wants hybrid pads like CP.

[54fighting]

Originally Posted by CSG Mike

The brake grease and spray that quiets things down burns off when you get things track temp hot, and the noise comes back very quickly. At street and AutoX temps, it'll work great and should be a solid short term solution.

Works great with Carbotechs...no noise at track for me.

[NoHaveMSG]

Originally Posted by autoracer86

Yeah those csg pads are no joke price wise lol.

They are really good though. I lost count of how many track days I did on the C1’s with a stop tech BBK. It was at least 12 and around 20k street miles. I absolutely melted down a set of XP10’s in half that time so price wise it does pencil out. Downside is they are hard on rotors at street temps, the C1 anyway. One thing I really liked about the C1’s was the pedal feel at the edge of ABS engagement. They are very positive feeling and consistent and it was especially noticeable in braking zones that had a bit of camber to the track or a crest. I am branching out and trying a few other pads this year but I know I could always go back to them.

[NoHaveMSG]

Originally Posted by Ultramaroon

This summer! I have no excuses left.

We need to look at OnGrid’s schedule and try to hit PIR on one of their days. They are a good group and price wise very affordable. They usually run a TA event in conjunction and there are a TON of twins, first and second gen, that run it.