NORCAL: Local Marketplace Buy/Sell

[ldooks]

Originally Posted by ldooks

Selling my stock rims + tires, about 5k miles on them


asking $400



No curb marks!


https://imgur.com/a/Otj69vo

Bump

[TRDGriffon]

Originally Posted by TRDGriffon

FS:
Open Flash Header V2 wrapped in DEI titanium wrap - $400
Open Flash Tablet V1 - $SOLD


Edit: Heres a photo of the header

BUMP header still available.

[Huesaurus]

Originally Posted by Huesaurus

*Raven Black Rear Bumper Cover for sale(has a tiny little ding on the plastic part).

Picture of Bumper

*Megan Racing Diffuser Part # RDLSFR12

Picture of Tail Light and Exhaust

Bumper: 250 or best offer
Diffuser: 60

Bump

[JeremyR]

Bump for this!

Originally Posted by JeremyR

I have the spare donut/tire from my car (2015) available. $50 obo!

[spike021]

I will be selling a set of 2017 performance package wheels along with original Primacy tires (roughly 18k miles on them) in roughly 1.5 to 2 weeks. I’ll upload some photos later. A couple do have some curbing but I’d imagine they should be fairly easily repairable.

They could probably make a good set of backup/track/autox wheels/tires.

Price: $400 OBO.

[ELLSSUU]

Originally Posted by spike021

I will be selling a set of 2017 performance package wheels along with original Primacy tires (roughly 18k miles on them) in roughly 1.5 to 2 weeks. I’ll upload some photos later. A couple do have some curbing but I’d imagine they should be fairly easily repairable.

They could probably make a good set of backup/track/autox wheels/tires.

Price: $400 OBO.

Willing to Ship?

[Superstar]

WTB: oem complete rear differential assembly (lsd, housing, etc.). Or trade my differential assembly with osg 1.5 way lsd for oem + cash.

[JonH]

Hi everyone,

I'm located in Menlo Park on the peninsula, but often find myself in other parts of the bay from time to time. Up for sale are the following:

Invidia 60mm Overpipe - $120
This overpipe was ceramic coated, but at this point the coating is starting to reach the end of its life in places. Includes hardware, though it isn't the original Invidia Hardware.






AEM Failsafe Wideband Gauge / Sensor - $225
Sensor and gauge are all in good condition. Includes additional gauge faces and silver trim ring, as well as ATI vent gauge holder. It is a 60mm holder though, and the gauge is a 52mm gauge, so it requires some padding to fill completely.











Full Blown Motorsports Oil Cooler - $350
Kit is made up of 19 row cooler, lines, Mocal thermostatic plate, and bracket to mount toward passenger's side of the bumper. Lines are 64" and 74" so they reach all the way to the far side of the car. As pictured, there was a minor abrasion to the 64" line, approximately 9" away from where it meets the sandwich adapter. As you can see, it only goes through the nylon covering of the line - it has not damaged the stainless line. Also pictured are the only blemishes to the cooler itself.














OEM JDM A/C Delete Bracket - $125
In excellent condition. Includes an extra plastic pulley cover that has been painted blue.

[racer_tom]

$900 in San Jose, CA.
Enkei RPF1 17"x9" wheels, 5x100, 35mm offset.

Gunmetal color. Very good condition. One wheel has curb paint scrape (see photo details).

Includes hub centric ring adapters, lug nuts & socket, stickers, and wheel manual.

The wheels have Bridgestone Potenza RE11 245/40R17 tires mounted. The tread is at or below the wear bars. So the tires are only appropriate for drifting, track use, or limited street driving under careful operations.

More photos are available in this ad: https://sfbay.craigslist.org/sby/wto/6715583796.html

Contact Tom: via text 408-823-7106, or email racer_tom@yahoo.com

[racer_tom]

$300 in San Jose, CA.
RCE springs, struts, shocks.

Racecomp Engineering "BRZ Yellow Sports" springs installed on low mileage (~20K) stock suspension front struts & rear shocks.

These springs drop the ride height 1" from stock and are a good match with the factory shocks. This is an excellent combination for street and track use. Besides improving the look of the stance, these spring lower the center of gravity a bit more and these spring rates provide a better balance of front to rear weight transfer.

These are assembled and ready for easy swap out. Unbolt your stock springs and struts and simply bolt these in. No disassembly and reassembly would be required.

Contact Tom; via text 408-823-7106, or email at racer_tom@yahoo.com

[racer_tom]

$280 in San Jose, CA
Carbotech X10 Front & Rear Brake Pads.

Fits Subaru BRZ, Scion FRS, and Toyota 86.
Part numbers CT-929 (front), and CT-1124 (rear). The full set (fronts + rears) retail for $377.

This slightly used full set of pads have on average 5/16" of material thickness on the fronts, and 6/16" on the rears.

These brake pads provide excellent performance for track use. They have a great bite, while being friendly on brake rotors, and have a long life. They even work very well with stock brake rotors.

Carbotech's website states:
When Carbotech™ unleashed the XP10™ to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10™ has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475°F (801°C). XP10™ still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech™ compounds so successful. Carbotech™ XP10™ is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.

More photos are available in this ad: https://sfbay.craigslist.org/sby/pts/6715668501.html

Contact Tom; via text 408-823-7106, or email at racer_tom@yahoo.com

[racer_tom]

$120 in San Jose.
Whiteline Strut Mounts & SPC Camber Bolts

Whiteline KCA335 front strut mounts which provide increased camber and caster while utilizing using a solid rubber mount bushing. This minimizes the harsh ride experienced with most other camber plates. Includes new strut top lock nuts.

Also included are a pair of EZ Cam camber bolts by Specialty Products Company. Part number 81280.

Will sell separately. $110 for the mounts. $15 for the bolts

More photos are available in this ad: https://sfbay.craigslist.org/sby/pts/6715880435.html

Contact Tom; via text 408-823-7106, or email at racer_tom@yahoo.com

[racer_tom]

$60 in San Jose.
Magnetic Number Panels

Look sharp. Don't mess around with masking tape numbers at your track days.

The 2 door panels measure 17.5"H x 16"W with flat black numbers 9.5"H x 5.75"W each. The maroon TTD class letters on the top can be removed and replaced with whatever you'd prefer.

There is also a small panel that fits on the trunk measuring 5"H x 5.75"W with numbers 4"H x 2"W each.

Proven to stay on the my car at 120 MPH while on track.

More photos are available in this ad: https://sfbay.craigslist.org/sby/pts/6715897214.html

Contact Tom; via text 408-823-7106, or email at racer_tom@yahoo.com

[racer_tom]

SOLD - SOLD - SOLD

$100 in San Jose. Red tinted stock Tail Lights

Excellent condition stock brake/marker/turn signal lights that have been professionally colored with red tint. These are in great shape and are fully functional with no leaks.

SOLD - SOLD - SOLD
Contact Tom; via text 408-823-7106, or email at racer_tom@yahoo.com
SOLD - SOLD - SOLD