DIY: LED Logo Projector Door Lights - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

wedwards98 · 04-20-2015, 03:20 AM

Hey everyone,

I recently installed some sweet LED door projector lights in my car and thought I would make a quick tutorial in case anyone else is looking to do the same. The install is super easy, especially if you have a courtesy door light already (if you don't the wiring is a little more intensive, but still doable).

Tons of Logo options available (BRZ, Subaru, TRD, Toyota, 86 Logo, etc) or you can order custom ones with anything. I'm a nerd so I went with the bat symbol

Anyway, I put the DIY tutorial in the attached PDF. There are lots of pictures in it to walk you through it. Check it out if you are interested!

elyugi1 · 04-23-2015, 12:19 AM

That looks sweet how did you do it?were did you get them from??

SR5 · 04-23-2015, 12:58 AM

holy bat light!..

DESTINY-BRZ · 04-23-2015, 07:58 AM

I HAVE AN EXTRA SET. IF ANYONE WANTS THEM. MAKE AN OFFER! JUST SHOOT ME A TEXT 7322398708

WILL CAN DO A PAYPAL DEAL

THEY ARE PLUG AND PLAY.

INSTALL TOOK ME 5MIN PER SIDE

adrixe · 04-23-2015, 07:19 PM

Interested in that! Let me know.

funwheeldrive · 04-23-2015, 07:37 PM

That's pretty cool. Too bad the FRS doesn't have it.

wedwards98 · 05-02-2015, 11:18 PM

Quote:

Originally Posted by elyugi1

That looks sweet how did you do it?were did you get them from??

Thanks, they are pretty easy. Pretty much just cut the hole in the bottom of the door panel and wire it to the courtesy lights. Check out the pdf I posted in the original post for the full details.

I bought mine off ebay for cheap, but there are tons out there. These are the ones I got: http://www.ebay.com/itm/151222154525...%3AMEBIDX%3AIT

wedwards98 · 05-02-2015, 11:20 PM

Quote:

Originally Posted by funwheeldrive

That's pretty cool. Too bad the FRS doesn't have it.

You can actually do it on the FRS as well, it just takes a little more effort if you don't have the courtesy light to tap into. You will have to wire it over to the door switch.

Here's a video how if you are interested:
[ame="https://www.youtube.com/watch?v=C0lTXk85Ezs"]https://www.youtube.com/watch?v=C0lTXk85Ezs[/ame]

DESTINY-BRZ · 05-03-2015, 12:39 AM

No cutting just replace door light

sactownbwoy · 05-12-2015, 03:21 PM

Quote:

Originally Posted by DESTINY-BRZ

I HAVE AN EXTRA SET. IF ANYONE WANTS THEM. MAKE AN OFFER! JUST SHOOT ME A TEXT 7322398708

WILL CAN DO A PAYPAL DEAL

THEY ARE PLUG AND PLAY.

INSTALL TOOK ME 5MIN PER SIDE

That's what I want. So much easier then dismantling the door. Where did you get them?

mattyd97 · 11-16-2015, 10:44 AM

Quote:

Originally Posted by DESTINY-BRZ

I HAVE AN EXTRA SET. IF ANYONE WANTS THEM. MAKE AN OFFER! JUST SHOOT ME A TEXT 7322398708

WILL CAN DO A PAYPAL DEAL

THEY ARE PLUG AND PLAY.

INSTALL TOOK ME 5MIN PER SIDE

Still have them?

dnieves · 11-29-2015, 10:09 AM

Crap! Too bad the FR-S isn't pre-wired. I would be happy with just the OEM red light in the door. It's easy but the last thing you want to introduce (especially under warranty) is a potential short circuit.

texasbound972 · 11-29-2015, 10:43 AM

http://blog.curran-connors.com/wp-co...rcuit-meme.jpg

https://d1juqo69tkizbw.cloudfront.ne...93d9.large.jpg

04-23-2015, 07:58 AM	#4
DESTINY-BRZ Member Join Date: Mar 2015 Drives: RED LIMITED BRZ Location: NEW YORK Posts: 27 Thanks: 0 Thanked 21 Times in 13 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	BRZ LOGO I HAVE AN EXTRA SET. IF ANYONE WANTS THEM. MAKE AN OFFER! JUST SHOOT ME A TEXT 7322398708 WILL CAN DO A PAYPAL DEAL THEY ARE PLUG AND PLAY. INSTALL TOOK ME 5MIN PER SIDE Attached Images Last edited by DESTINY-BRZ; 04-23-2015 at 08:12 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Custom Door LED Projector	jobe1022	DIY (Do-It-Yourself) Guides	7	07-11-2015 01:40 PM
No interior lights except door panel lights (BRZ)	BRZZZZZZZZZZ	Issues \| Warranty \| Recalls / TSB	3	01-05-2015 12:46 AM
HELP!!! Fog lights....LED DRL Fogs vs. Projector Fogs w/ Halo	tiz22	Cosmetic Modification (Interior/Exterior/Lighting)	4	11-02-2013 01:57 PM
HID Ready Projector Fog Lights w/ Halo	mmontes	Cosmetic Modification (Interior/Exterior/Lighting)	5	09-13-2013 08:03 AM

04-23-2015, 12:19 AM	#2
elyugi1 Member Join Date: Mar 2015 Drives: raven black Location: United States Posts: 43 Thanks: 3 Thanked 1 Time in 1 Post Mentioned: 1 Post(s) Tagged: 0 Thread(s)	That looks sweet how did you do it?were did you get them from??

04-23-2015, 07:19 PM	#5
adrixe Senior Member Join Date: Dec 2014 Drives: 2014 Subaru BRZ Location: Halifax, NS Posts: 270 Thanks: 11 Thanked 12 Times in 10 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Interested in that! Let me know.

04-23-2015, 07:37 PM	#6
funwheeldrive Senior Member Join Date: Jan 2014 Drives: BANNED FOR TELLING THE TRUTH Location: MODS ARE ON A POWER TRIP Posts: 3,447 Thanks: 7,830 Thanked 3,022 Times in 1,409 Posts Mentioned: 38 Post(s) Tagged: 1 Thread(s)	That's pretty cool. Too bad the FRS doesn't have it.

05-03-2015, 12:39 AM	#9
DESTINY-BRZ Member Join Date: Mar 2015 Drives: RED LIMITED BRZ Location: NEW YORK Posts: 27 Thanks: 0 Thanked 21 Times in 13 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	No cutting just replace door light

11-29-2015, 10:09 AM	#12
dnieves Senior Member Join Date: Jul 2013 Drives: FR-S 10 Series Location: NY Posts: 1,062 Thanks: 615 Thanked 347 Times in 251 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Crap! Too bad the FR-S isn't pre-wired. I would be happy with just the OEM red light in the door. It's easy but the last thing you want to introduce (especially under warranty) is a potential short circuit.

User Name		Remember Me?
Password