Help with suspension issue - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

arkanist · 03-08-2018, 05:09 PM

Hey ya'll, I'm having a few issues with my suspension and am trying to diagnose the issue.

A while back I dropped my front driver side wheel off a curb at ~25mph bad enough to mess up my alignment and to cock the wheel 20-30 degrees to the right. I got new wheels and tires and an alignment and everything was fine for a while.

Fast forward 6-7 months and I started noticing that while backing out of my garage and turning left (full lock) I would sometimes hear a clunk. This clunk has been getting louder and now is to the point where I feel the car lurch a little when it happens. Also, the front driver side of the car has started making a quiet creak when going over speed bumps.

I am going to put her up on stands and try to take a look tonight but was curious if anyone could identify the issue from that information.

HimBRZ · 03-08-2018, 05:17 PM

I know this may sound overly simplistic, but I think something is loose.

arkanist · 03-08-2018, 05:51 PM

That would be great. I will check everything over when I get it on stands tonight. Thanks!

Leonardo · 03-08-2018, 06:17 PM

Check your upper ball joints. They made a clunk noise on my lexus when one of mine started to go out. If it is this issue, fix it right away.

tyler_win_photo · 03-08-2018, 06:17 PM

Could possibly be a leaking strut causing the creak when you go over speedbumps.

finch1750 · 03-08-2018, 06:29 PM

Also be sure to check the strut braces the go to the firewall. They can clunk when the chassis shifts as well.

Use a wrench to check everything. Things can seem tight by hand but really be fairly loose still

arkanist · 04-06-2018, 05:59 PM

Late update but an update none the less.

Crash bolts were loose. Ball joint was loose (that was the clunking). Tie rod was bent. Strut was bent.

Everything but the strut is fixed and I am picking up / installing a pair of oem front coils tonight. Should be back to 100%.

Clearly I should have had this looked at sooner.

03-08-2018, 05:09 PM	#1
arkanist Senior Member Join Date: May 2016 Drives: 2016 BRZ Limited, Stock Location: Seattle, WA Posts: 243 Thanks: 183 Thanked 154 Times in 94 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Help with suspension issue Hey ya'll, I'm having a few issues with my suspension and am trying to diagnose the issue. A while back I dropped my front driver side wheel off a curb at ~25mph bad enough to mess up my alignment and to cock the wheel 20-30 degrees to the right. I got new wheels and tires and an alignment and everything was fine for a while. Fast forward 6-7 months and I started noticing that while backing out of my garage and turning left (full lock) I would sometimes hear a clunk. This clunk has been getting louder and now is to the point where I feel the car lurch a little when it happens. Also, the front driver side of the car has started making a quiet creak when going over speed bumps. I am going to put her up on stands and try to take a look tonight but was curious if anyone could identify the issue from that information.

03-08-2018, 06:17 PM	#4
Leonardo Country Boy 4 Life Join Date: Jul 2012 Drives: 19' & 06' Ridgelines, 13' FR-S Location: EUGENE Posts: 5,228 Thanks: 6,719 Thanked 5,291 Times in 2,720 Posts Mentioned: 47 Post(s) Tagged: 1 Thread(s)	Check your upper ball joints. They made a clunk noise on my lexus when one of mine started to go out. If it is this issue, fix it right away. __________________ I LIKE TIRES!

03-08-2018, 06:17 PM	#5
tyler_win_photo Senior Member Join Date: Dec 2013 Drives: 2014 Scion FRS (Asphalt) Location: Redmond, WA Posts: 553 Thanks: 36 Thanked 171 Times in 141 Posts Mentioned: 6 Post(s) Tagged: 2 Thread(s)	Could possibly be a leaking strut causing the creak when you go over speedbumps. __________________ AVO Stage 2 Turbo Build Thread https://wheelwell.com/tyler-nguyen-1...014-scion-fr-s

03-08-2018, 06:29 PM	#6
finch1750 Undisputed El Presidente Join Date: Jun 2012 Drives: Zenki 37J ZN6 Location: Stockton, CA Posts: 11,571 Thanks: 9,382 Thanked 9,397 Times in 5,261 Posts Mentioned: 374 Post(s) Tagged: 33 Thread(s)	Also be sure to check the strut braces the go to the firewall. They can clunk when the chassis shifts as well. Use a wrench to check everything. Things can seem tight by hand but really be fairly loose still __________________ "Just like how a strut bar somehow enables you to corner 20MPH faster around a cloverleaf on-ramp, when the reality is, you can do it already but you just don't have to balls to do it." - CSG David

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Suspension issue?	Dacfrs	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	8	12-08-2017 09:25 PM
Need Help with Suspension Issue	Silverfox	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	5	08-04-2017 12:44 PM
Tein Street Flex suspension issue (lowering itself over time)	Sportsguy83	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	64	07-26-2015 05:00 PM
Suspension Question/Issue	slmducf20	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	0	05-04-2015 10:45 PM
Need help fast - suspension issue during spring install	finch1750	Scion FR-S / Toyota 86 GT86 General Forum	5	07-08-2013 03:30 PM

03-08-2018, 05:17 PM	#2
HimBRZ Member Join Date: Feb 2015 Drives: 2013 BRZ Limited Location: Elvisland Posts: 58 Thanks: 4 Thanked 37 Times in 18 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I know this may sound overly simplistic, but I think something is loose.

03-08-2018, 05:51 PM	#3
arkanist Senior Member Join Date: May 2016 Drives: 2016 BRZ Limited, Stock Location: Seattle, WA Posts: 243 Thanks: 183 Thanked 154 Times in 94 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	That would be great. I will check everything over when I get it on stands tonight. Thanks!

04-06-2018, 05:59 PM	#7
arkanist Senior Member Join Date: May 2016 Drives: 2016 BRZ Limited, Stock Location: Seattle, WA Posts: 243 Thanks: 183 Thanked 154 Times in 94 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Late update but an update none the less. Crash bolts were loose. Ball joint was loose (that was the clunking). Tie rod was bent. Strut was bent. Everything but the strut is fixed and I am picking up / installing a pair of oem front coils tonight. Should be back to 100%. Clearly I should have had this looked at sooner.

User Name		Remember Me?
Password