2013 BRZ Ls1 5.7, Hydra Nemesis

[Swift]

Great job!


Could you make a list of all parts used in the swap since different people do it different ways and what worked best for you. You made it look easy lol.


Just a benefit to all the members here with documenting builds.

[vijay.dy06]

Originally Posted by Swift

Great job!


Could you make a list of all parts used in the swap since different people do it different ways and what worked best for you. You made it look easy lol.


Just a benefit to all the members here with documenting builds.

Thanks. Yes I will organize all my parts used. It wasn't too difficult. I've been following Dustin's V8 swap thread, Wutsai, Joel Spitsnaugle (Joel has a good write up on his thread(Sorry I don't know how to tag them)), and many other threads for the last 2 years; at the same time collecting all the parts for 2 years also which made the process not too difficult. The biggest hurdle now is just the electronic portion but there already is a solution for that; it just depends if you want to fork the money out for a Motec unit or utilize the less expensive unit which is the Nemesis. But if there are any questions or picture request, please feel free to ask.

Sent from my SM-G950U using Tapatalk

[Ashikabi]

Originally Posted by vijay.dy06

Thanks. Yes I will organize all my parts used. It wasn't too difficult. I've been following Dustin's V8 swap thread, Wutsai, Joel Spitsnaugle (Joel has a good write up on his thread(Sorry I don't know how to tag them)), and many other threads for the last 2 years; at the same time collecting all the parts for 2 years also which made the process not too difficult. The biggest hurdle now is just the electronic portion but there already is a solution for that; it just depends if you want to fork the money out for a Motec unit or utilize the less expensive unit which is the Nemesis. But if there are any questions or picture request, please feel free to ask.

Sent from my SM-G950U using Tapatalk

@vijay.dy06

[TwinsLife]

I'm guessing you ended up cutting heater lines? Also do any swaps allow for keeping AC?

[vijay.dy06]

Originally Posted by TwinsLife

I'm guessing you ended up cutting heater lines? Also do any swaps allow for keeping AC?

I didn't cut the heater lines. I just bent them down enough for the intake to clear. AC is retainable with Motec, Emtron, and Hydra Nemesis. I believe that MRS Collins is working on AC also that I'm aware of.

Sent from my SM-G950U using Tapatalk

[vijay.dy06]

Originally Posted by Swift

Great job!


Could you make a list of all parts used in the swap since different people do it different ways and what worked best for you. You made it look easy lol.


Just a benefit to all the members here with documenting builds.

I uploaded a list of parts that I used. Hope that helps some. @Swift

Sent from my SM-G950U using Tapatalk