WORKS Exhaust System - Development

[Simply_the_best]

Originally Posted by 86_ZN6

the airflow on the left tip is not direct so it will just get the bleed off of passing airflow

i will post a pic later to further explain

Not liking this design for the tailpipe should have just kept it single. Exhaust flow takes the path of least resistance. You will have more exiting the left than right side. I know from experience, I've seen this happen before first hand on a buddies car.

[86_ZN6]

Originally Posted by BlackyRose

It's not stainless? Have you had any problems with fading or rusting?

There is an option where you can have it done with full stainless for an Additional
$79

More than 50 systems already sold and no complains on rusting or fading

[86_ZN6]

Originally Posted by Simply_the_best

Not liking this design for the tailpipe should have just kept it single. Exhaust flow takes the path of least resistance. You will have more exiting the left than right side. I know from experience, I've seen this happen before first hand on a buddies car.

On my car and the rest iv seen the right side always emits more exhaust gas during WOT

Not sure whats goin on with your buddys car

[VenomRush]

Originally Posted by 86_ZN6

There is an option where you can have it done with full stainless for an Additional
$79

More than 50 systems already sold and no complains on rusting or fading

not when i was ordering mine

[BlackyRose]

How do we choose the stainless option?

[86_ZN6]

Originally Posted by BlackyRose

How do we choose the stainless option?

you can now add stainless steel on the website

by the way, for sales use this thread instead ---> http://www.ft86club.com/forums/showthread.php?t=36571

so that mods dont shut this thread down.

[86_ZN6]

New 304 SS ABM system

[BlackyRose]

Originally Posted by 86_ZN6

New 304 SS ABM system

Absolutely gorgeous

[Apexer]

How much for the stainless ABM?

[86_ZN6]

Originally Posted by Apexer

How much for the stainless ABM?

304 SS is $80 more. total of $459

[Wheelsoffracing]

Originally Posted by crouchingpinoy

I was able to adjust it a little bit. Not perfectly aligned with the left side but slightly better than yesterday. Only people with OCD (like me) would notice them.



The exhaust are custom made as you order so I accept the fact that it's a "normal imperfection". Loving the sound

I thought this misalignment was fixed! I just got mine installed today 11/21/13 after receiving it yesterday and can see the slight off balance that is shown in this photo. I agree, I'll accept it as a normal, hand made imperfection with a great sound, but you should know it's still an issue.

[86_ZN6]

Originally Posted by Wheelsoffracing

I thought this misalignment was fixed! I just got mine installed today 11/21/13 after receiving it yesterday and can see the slight off balance that is shown in this photo. I agree, I'll accept it as a normal, hand made imperfection with a great sound, but you should know it's still an issue.

adjust the hangers. and play around it

every time we install these on a car it's always perfect

[Wheelsoffracing]

Originally Posted by 86_ZN6

adjust the hangers. and play around it

every time we install these on a car it's always perfect

I noticed the installer used all 4 rubber mounts. Your instructions say to use just 3. It looks like you don't use the mount nearest the front on the driver's side. Is this right? Maybe that's what is causing the misalignment.

[CajunFRS]

The ABM videos posted on the first page, 86_ZN6 car I assume, is that sound with just a ABM?