>>> 3 New Lightweight Flow Form Wheels <<< 720 FORM Compilation - Page 16 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

*LongFella · 10-29-2014, 10:50 PM

Quote:

Originally Posted by Talus1

Cool! Any chance you could post some pics showing the whole car from the side, i.e. from a bit further away? I've got a SWP BRZ as well and these are the rims I have been thinking about.

Thanks!

Sorry for the delayed post; got a little busy this week!

Hope this helps!
Name: ImageUploadedByTapatalk1414637400.913330.jpg
Views: 3180
Size: 254.0 KB

Name: ImageUploadedByTapatalk1414637400.913330.jpg
Views: 3180
Size: 254.0 KB

Name: ImageUploadedByTapatalk1414637408.577334.jpg
Views: 3098
Size: 279.7 KB

rtyp3 · 11-01-2014, 03:22 PM

Just installed GTF1s on my BRZ with stock suspension. No strut clearance issues, but they do stick out a bit. Not a good day to test them out (been snowing here), but looks great.

17x9 +35 offset
255/40R-17 RE-11A
Stock suspension

Name: ImageUploadedByTapatalk1414869693.891596.jpg
Views: 2849
Size: 327.8 KB

Name: ImageUploadedByTapatalk1414869693.891596.jpg
Views: 2849
Size: 327.8 KB

Name: ImageUploadedByTapatalk1414869710.493274.jpg
Views: 2736
Size: 255.4 KB

Name: ImageUploadedByTapatalk1414869757.207856.jpg
Views: 2479
Size: 211.0 KB

twag4 · 11-07-2014, 08:49 PM

To people who own these wheels, particularly GTF1 in 17x9: Do these wheels support the OEM TPMS? Somebody please respond.

rtyp3 · 11-07-2014, 08:50 PM

I didn't put TPMS in these wheels, so not sure. But why couldn't you use the same ones?

*LongFella · 11-07-2014, 08:59 PM

Quote:

Originally Posted by twag4

To people who own these wheels, particularly GTF1 in 17x9: Do these wheels support the OEM TPMS? Somebody please respond.

You should be fine...

2point0 · 11-08-2014, 11:36 PM

Is everyone using spline drive lug nuts with these? Looks like the holes are small, I've had some lug nuts not fit due to the flare at the bottom. Or a socket not being slim enough.

I'm specifically looking at the GTF1.

BRZ-y · 11-09-2014, 12:17 AM

Quote:

Originally Posted by twag4

To people who own these wheels, particularly GTF1 in 17x9: Do these wheels support the OEM TPMS? Somebody please respond.

Yes they work fine with tpms.

2point0 · 11-20-2014, 12:42 PM

Quote:

Originally Posted by 2point0

Is everyone using spline drive lug nuts with these? Looks like the holes are small, I've had some lug nuts not fit due to the flare at the bottom. Or a socket not being slim enough.

I'm specifically looking at the GTF1.

Anyone?

I just sold some stocks and the money came in today, so I'm ready to pull the trigger. Guess I'll find out about the lug nuts when they get here.

Can anyone comment on shipping times to the West Coast, US? I know it'll be all screwed up due to the holiday next week, but I'll be out of town for a few days and would hate for them to show up when I'm not there.

*LongFella · 11-20-2014, 01:00 PM

Quote:

Originally Posted by 2point0

Anyone?

I just sold some stocks and the money came in today, so I'm ready to pull the trigger. Guess I'll find out about the lug nuts when they get here.

Can anyone comment on shipping times to the West Coast, US? I know it'll be all screwed up due to the holiday next week, but I'll be out of town for a few days and would hate for them to show up when I'm not there.

The spline drive will be fine.

I use the EVS Tuning Spline Drive (red) with my set-up. No issues. http://www.ft86club.com/forums/showthread.php?t=18106

I'm in Irvine, CA and here was my shipping time frame:

Ordered: 10/12/2014
Delivered: 10/24/2014

Be prepared to pay UPS via check the import fee. It was around $50.

Hope that helps!

BRZZZZZZZZZZ · 11-20-2014, 01:04 PM

I used spine drives on mine, it works fine.

deucethemoose · 11-20-2014, 03:48 PM

Quote:

Originally Posted by 2point0

Anyone?

I just sold some stocks and the money came in today, so I'm ready to pull the trigger. Guess I'll find out about the lug nuts when they get here.

Can anyone comment on shipping times to the West Coast, US? I know it'll be all screwed up due to the holiday next week, but I'll be out of town for a few days and would hate for them to show up when I'm not there.

Assuming you're ordering from 1010tires?

They're located in Vancouver, BC so it won't take long. It only took three days for mine, but I'm less than 200 miles from them.

I tossed some Gorilla lugs on mine. Plenty of room.

2point0 · 11-20-2014, 03:54 PM

Thanks, guys. Yes, as far as I know, 1010tires is the only place to get these.

I assumed spline drives would fit, just wasn't sure if they're REQUIRED. I do have a set of Gorillas, but my pretty blue Kics have a fat seat and don't fit one of the sets of holes on my Drags.

Quote:

Originally Posted by *LongFella

Be prepared to pay UPS via check the import fee. It was around $50.

Did you get an accurate delivery date early on? I guess I'd need to make sure I'm home on that day. Or maybe ship to work...

*LongFella · 11-20-2014, 04:40 PM

Quote:

Originally Posted by 2point0

Thanks, guys. Yes, as far as I know, 1010tires is the only place to get these.

I assumed spline drives would fit, just wasn't sure if they're REQUIRED. I do have a set of Gorillas, but my pretty blue Kics have a fat seat and don't fit one of the sets of holes on my Drags.

Did you get an accurate delivery date early on? I guess I'd need to make sure I'm home on that day. Or maybe ship to work...

It was shipped via UPS and they are pretty good about the date of delivery.

2point0 · 11-21-2014, 01:30 PM

Order placed. Now to stare at the door until they arrive.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BUDDY CLUB Lightweight Racing Wheels - JDM, lightweight, low pricetag \| 18x8.5"	GuerillaRacing	Wheels and Tires	116	01-20-2015 06:32 PM
FT86 Canada HRE Flow+Form - SimplyTire 2014	Zook@SimplyTire	Canada Classifieds	4	06-07-2014 11:05 AM
Your Top Three Form of Automotive Racing, From Two to Ten Wheels.	LBC Por Siempre	Other Vehicles & General Automotive Discussions	14	02-24-2014 11:09 AM
New SSR Flow Formed wheels available for FRS - Not bad on price!	ModBargains.com	Wheels and Tires	21	01-13-2014 11:27 AM
Lightweight wheels or wide wheels	Moetivegt86	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	28	11-06-2013 10:57 PM

11-07-2014, 08:49 PM	#213
twag4 Senior Member Join Date: Sep 2013 Drives: frs Location: The depths Posts: 749 Thanks: 355 Thanked 427 Times in 241 Posts Mentioned: 5 Post(s) Tagged: 2 Thread(s)	To people who own these wheels, particularly GTF1 in 17x9: Do these wheels support the OEM TPMS? Somebody please respond.

11-20-2014, 01:04 PM	#220
BRZZZZZZZZZZ Car Nut Join Date: Dec 2013 Drives: BMW 335d, Toyota Echo RS, FRS Location: Calgary Posts: 1,557 Thanks: 368 Thanked 603 Times in 346 Posts Mentioned: 12 Post(s) Tagged: 2 Thread(s)	I used spine drives on mine, it works fine.

User Name		Remember Me?
Password