jack puck and pad - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

APEXIT53 · 06-02-2018, 05:39 PM

Hey everyone. As some of you know I moved from my Brz to a 17 Camaro for autocross. This past weekend at spring nationals someone in SSC came over and asked about my jack puck. Im sorry I didn't get their name but we were about to run so my mind was elsewhere. I rememeber from my Brz the pinch welds being super weak, especially at the fender and bending over. The Camaro is no exception so zl1 adding had developed these for our cars and a few others.

https://zl1addons.com/collections/ja...for-pinch-weld

https://zl1addons.com/collections/ja...oducts/magpuck

TheY work awesome, just don't forget to remove them before driving off!

Take care!

Mike

steverife · 06-04-2018, 07:09 AM

Wasn't me, but I'm definitely interested.

M0nk3y · 06-04-2018, 07:37 AM

FWIW - I run these.

A lot cheaper.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Takumi788 · 06-04-2018, 07:46 AM

This is what I use. It works great and is cheap.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

APEXIT53 · 06-04-2018, 12:39 PM

Quote:

Originally Posted by M0nk3y

FWIW - I run these.

A lot cheaper.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Ive used those. after a few times in the heat and the weight of the camaro they split in twain lol

ka-t_240 · 06-04-2018, 01:22 PM

I use hockey pucks. Cut out a bit of the center, works great.

They seem to last 2-3 years on my regular wheel swapping.

bmacfrs · 06-04-2018, 10:37 PM

I have used these for a while. No problems.

DEDC Jack Pad Universal Slotted Frame Rubber Jack Pad Medium Size 2 Pack https://www.amazon.com/dp/B01MQD0YXO?ref=yo_pop_ma_swf

Sent from my SM-G960U using Tapatalk

venturaII · 06-05-2018, 01:34 PM

What ever happened to using a piece of 2x4 with a slot cut down the middle?

2superblus · 06-05-2018, 05:42 PM

This

https://www.amazon.com/Dewhel-Adapte...rds=jack+point

15limited · 06-05-2018, 06:46 PM

Quote:

Originally Posted by venturaII

What ever happened to using a piece of 2x4 with a slot cut down the middle?

I could see wood splitting a bit easier than pucks after some abuse, and also, you wouldnt have to use a spinning blade of death with electricity running through it to cut and slot said timber.

Sent from my SM-G950U using Tapatalk

venturaII · 06-06-2018, 08:25 AM

Quote:

Originally Posted by 15limited

I could see wood splitting a bit easier than pucks after some abuse, and also, you wouldnt have to use a spinning blade of death with electricity running through it to cut and slot said timber.

Sent from my SM-G950U using Tapatalk

You gotta die sometime.

venturaII · 06-06-2018, 08:27 AM

Quote:

Originally Posted by 2superblus

This

https://www.amazon.com/Dewhel-Adapte...rds=jack+point

LOL - $45 for jack pads. For the person who has no idea what to buy for their car.

2superblus · 06-13-2018, 04:25 PM

Or for the people that actually want to keep the pinch welds from looking like absolute garbage munched metal.

Hyper4mance2k · 06-15-2018, 09:56 AM

Quote:

Originally Posted by ka-t_240

I use hockey pucks. Cut out a bit of the center, works great.

They seem to last 2-3 years on my regular wheel swapping.

This.

I spent $0.99 on 2 hockey pucks that have lasted me for 10 plus years. I cut a grove in them, then screwed and glued them to a round piece of plastic I cut from an ikea cutting board.

06-02-2018, 05:39 PM	#1
APEXIT53 Senior Member Join Date: Jul 2014 Drives: 17 Camaro SS Location: Madison WI Posts: 148 Thanks: 13 Thanked 38 Times in 23 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	jack puck and pad Hey everyone. As some of you know I moved from my Brz to a 17 Camaro for autocross. This past weekend at spring nationals someone in SSC came over and asked about my jack puck. Im sorry I didn't get their name but we were about to run so my mind was elsewhere. I rememeber from my Brz the pinch welds being super weak, especially at the fender and bending over. The Camaro is no exception so zl1 adding had developed these for our cars and a few others. https://zl1addons.com/collections/ja...for-pinch-weld https://zl1addons.com/collections/ja...oducts/magpuck TheY work awesome, just don't forget to remove them before driving off! Take care! Mike Last edited by APEXIT53; 06-04-2018 at 05:15 PM.

06-04-2018, 07:37 AM	#3
M0nk3y Senior Member Join Date: Oct 2016 Drives: 2016 Scion FRS / Chevy Colorado Location: Ohio Posts: 639 Thanks: 51 Thanked 535 Times in 298 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	FWIW - I run these. A lot cheaper. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 __________________ Kyle H. - #89 STX

06-04-2018, 10:37 PM	#7
bmacfrs Senior Member Join Date: Dec 2016 Drives: 2013 FRS Location: Central PA Posts: 302 Thanks: 146 Thanked 66 Times in 43 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I have used these for a while. No problems. DEDC Jack Pad Universal Slotted Frame Rubber Jack Pad Medium Size 2 Pack https://www.amazon.com/dp/B01MQD0YXO?ref=yo_pop_ma_swf Sent from my SM-G960U using Tapatalk __________________ WIFE: "How can there be anything left to buy?"

06-05-2018, 01:34 PM	#8
venturaII Only users lose drugs. Join Date: Nov 2014 Drives: All the time Location: Shrewsbury upon Worcestershire Posts: 1,818 Thanks: 874 Thanked 1,067 Times in 674 Posts Mentioned: 3 Post(s) Tagged: 2 Thread(s)	What ever happened to using a piece of 2x4 with a slot cut down the middle? __________________ "To know a thing well, know it's limits. Only when pushed beyond its tolerances will true nature be seen." Amtal Rule

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Changing oils by myself, are these a recommended jack+jack stand?	btan219	BRZ First-Gen (2012+) -- General Topics	67	10-23-2021 03:54 PM
Review of ACT SB7-XTG6 6 Puck Clutch	nickw14	Engine, Exhaust, Transmission	1	03-15-2016 08:11 PM
WTB: Low profile floor jack and jack stands!	lupindub	Want-To-Buy Requests	2	11-26-2015 11:03 PM
Clutchmasters FX400 (6 Puck)	Supermassive	Engine, Exhaust, Transmission	20	08-02-2013 05:29 AM

06-04-2018, 07:09 AM	#2
steverife Senior Member Join Date: Feb 2018 Drives: 2016 Scion FRS Location: Knoxville, TN Posts: 457 Thanks: 52 Thanked 275 Times in 181 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Wasn't me, but I'm definitely interested.

06-04-2018, 01:22 PM	#6
ka-t_240 Senior Member Join Date: May 2014 Drives: BRZ Location: Fargo, ND Posts: 968 Thanks: 124 Thanked 327 Times in 236 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I use hockey pucks. Cut out a bit of the center, works great. They seem to last 2-3 years on my regular wheel swapping.

06-05-2018, 05:42 PM	#9
2superblus Senior Member Join Date: Sep 2012 Drives: 13 BRZ WRB Location: Wiscowsin Posts: 269 Thanks: 71 Thanked 132 Times in 78 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	This https://www.amazon.com/Dewhel-Adapte...rds=jack+point

06-13-2018, 04:25 PM	#13
2superblus Senior Member Join Date: Sep 2012 Drives: 13 BRZ WRB Location: Wiscowsin Posts: 269 Thanks: 71 Thanked 132 Times in 78 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Or for the people that actually want to keep the pinch welds from looking like absolute garbage munched metal.

User Name		Remember Me?
Password