Wheel Directory: Enkei RS05RR 18x8.5 +42 - Page 9 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

t_welby_86 · 05-06-2014, 03:01 AM

I just test fitted mine today, they barely rub at full lock. No fender work done either. But ill be getting my fenders rolled this week. Take a look at my thread i just posted.

UltraMarine86 · 05-06-2014, 05:35 AM

i have 18x9.5 with 255/35/18's and very very little camber (if any) and they fit with out rub

empower-auto · 05-06-2014, 07:43 AM

Do they clear the control arm at lock? I have 18x9.5 +43 RS05RR'S sitting in my living room and don't want to install them if the fit sucks

Sent from my SGH-I337M using Tapatalk

tinma · 05-06-2014, 08:50 AM

There is another thread for 18x9.5 xD. Maybe there are more people on that threat that have that spec than on this thread where they are mainly 18x8.5 :P

Probably better to post your questions and answers there so that people with the same issue and that spec rim will be looking in the right area

Pablitomarrero · 05-06-2014, 09:20 AM

Quote:

Originally Posted by tinma

There is another thread for 18x9.5 xD. Maybe there are more people on that threat that have that spec than on this thread where they are mainly 18x8.5 :P

Probably better to post your questions and answers there so that people with the same issue and that spec rim will be looking in the right area

Ill post up if I have any fitment issues. Ill be running 18x8.5 in front and 18x9.5 in the back. Planning on going 235/255 respectivley

Noz · 05-06-2014, 01:56 PM

I have 9.5 with 255/35 up front. Only rubs a little at full lock. Camber is at about -2.

Pablitomarrero · 05-23-2014, 08:13 AM

Ok, everything fits PERFECT with no rubbing issues. Just put them on yesterday.
18x8.5 and 18x9.5. (235/40/18, 255/35/18 respectivley)
Lowerd on TRD springs

No rubbing at any moment, miles of clearance in the rear from the suspension... I MIGHT be able to sneak in 265, but im scared it will rub the sheet metal as the 255's JUST sit behind the metal. I woul be worried in heavy cornering were the wheel digs into the well that the rubber would contact the metal with 265. My only problem with 255 on a 9.5 is that the leave a little bit of a lip and i prefer rubber to be perfectly flush with rim... It looks awesome anyways. In front i dont think i can go bigger than 235. I can barley wedge my finger between spring and rubber... Its that tight, but absolutley no contact in full lock and extreme cornering. All in all i am extremeley happy. Havent done alignment yet, ill post up the results when i do

Sent from my iPhone using Tapatalk

Pablitomarrero · 05-23-2014, 08:16 AM

Name: ImageUploadedByTapatalk1400847339.694940.jpg
Views: 6276
Size: 194.3 KB

There she is

Sent from my iPhone using Tapatalk

UltraMarine86 · 05-23-2014, 09:49 AM

Quote:

Originally Posted by Pablitomarrero

There she is

Sent from my iPhone using Tapatalk

Needs tinted windows...but it looks great

Sent from my SCH-I605 using Tapatalk

Pablitomarrero · 05-23-2014, 09:51 AM

Quote:

Originally Posted by UltraMarine86

Needs tinted windows...but it looks great

Sent from my SCH-I605 using Tapatalk

Lol! Ive been told, but i enjoy untinted windows! Let there be lots of light!!!!

Sent from my iPhone using Tapatalk

Pablitomarrero · 05-23-2014, 09:52 AM

Im going to switch tire sizes today in the rear... Gonna try 265. I dont think it will rub, i just think that there is too much exposed lip...

Sent from my iPhone using Tapatalk

UltraMarine86 · 05-23-2014, 12:25 PM

Yeah that's what I'm gonna try next. My 255/35's are very slightly stretched

Sent from my SCH-I605 using Tapatalk

Pablitomarrero · 05-23-2014, 02:21 PM

Quote:

Originally Posted by UltraMarine86

Yeah that's what I'm gonna try next. My 255/35's are very slightly stretched

Sent from my SCH-I605 using Tapatalk

Im in the tire shop. Ill let u know. They say it might not fit but taking some measurements it should fit comfortably

Sent from my iPhone using Tapatalk

UltraMarine86 · 05-23-2014, 02:43 PM

So your doing 255/35 front and 265/35 rear?

Sent from my SCH-I605 using Tapatalk

05-06-2014, 07:43 AM	#115
empower-auto Kouki-Monster Join Date: May 2012 Drives: 2013 Scion FR-S Location: Saskatoon, SK Posts: 1,137 Thanks: 11 Thanked 562 Times in 261 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Do they clear the control arm at lock? I have 18x9.5 +43 RS05RR'S sitting in my living room and don't want to install them if the fit sucks Sent from my SGH-I337M using Tapatalk __________________ Rich Anderson EMPOWER AUTO

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheel Directory: Enkei Raijin 18x8.5 +45 / 18x9.5 +45	GuerillaRacing	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	221	08-01-2019 10:30 AM
Gauging interest Enkei RS05RR 18x9+40/18x8.5+50/18x8.5+42	THMotorsports.com	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	0	09-19-2013 04:33 PM
Wheel Directory: BBS LM 18x8.0 +50	stoneman155	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	20	07-08-2013 07:55 PM
Wheel Directory: BBS RE 18x8.0 +50	DarrenDriven	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	3	06-25-2013 08:49 PM

05-06-2014, 03:01 AM	#113
t_welby_86 Member Join Date: Feb 2014 Drives: Stock frs Location: Fallbrook Posts: 34 Thanks: 0 Thanked 7 Times in 3 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I just test fitted mine today, they barely rub at full lock. No fender work done either. But ill be getting my fenders rolled this week. Take a look at my thread i just posted.

05-06-2014, 05:35 AM	#114
UltraMarine86 Senior Member Join Date: Feb 2013 Drives: Ultramarine '13 FR-S Location: Hampton, VA Posts: 224 Thanks: 148 Thanked 69 Times in 37 Posts Mentioned: 4 Post(s) Tagged: 1 Thread(s)	i have 18x9.5 with 255/35/18's and very very little camber (if any) and they fit with out rub

05-06-2014, 08:50 AM	#116
tinma Senior Member Join Date: Jun 2013 Drives: '13 BRZ Location: Canada Posts: 495 Thanks: 479 Thanked 172 Times in 117 Posts Mentioned: 5 Post(s) Tagged: 2 Thread(s)	There is another thread for 18x9.5 xD. Maybe there are more people on that threat that have that spec than on this thread where they are mainly 18x8.5 :P Probably better to post your questions and answers there so that people with the same issue and that spec rim will be looking in the right area

05-06-2014, 01:56 PM	#118
Noz Senior Member Join Date: Oct 2012 Drives: Ultramarine Blue FR-S Location: So Cal Posts: 153 Thanks: 44 Thanked 151 Times in 56 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I have 9.5 with 255/35 up front. Only rubs a little at full lock. Camber is at about -2.

05-23-2014, 08:13 AM	#119
Pablitomarrero Senior Member Join Date: Mar 2013 Drives: FR-S 10 series Location: Guaynabo, Puerto Rico Posts: 736 Thanks: 370 Thanked 384 Times in 240 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	Ok, everything fits PERFECT with no rubbing issues. Just put them on yesterday. 18x8.5 and 18x9.5. (235/40/18, 255/35/18 respectivley) Lowerd on TRD springs No rubbing at any moment, miles of clearance in the rear from the suspension... I MIGHT be able to sneak in 265, but im scared it will rub the sheet metal as the 255's JUST sit behind the metal. I woul be worried in heavy cornering were the wheel digs into the well that the rubber would contact the metal with 265. My only problem with 255 on a 9.5 is that the leave a little bit of a lip and i prefer rubber to be perfectly flush with rim... It looks awesome anyways. In front i dont think i can go bigger than 235. I can barley wedge my finger between spring and rubber... Its that tight, but absolutley no contact in full lock and extreme cornering. All in all i am extremeley happy. Havent done alignment yet, ill post up the results when i do Sent from my iPhone using Tapatalk

05-23-2014, 08:16 AM	#120
Pablitomarrero Senior Member Join Date: Mar 2013 Drives: FR-S 10 series Location: Guaynabo, Puerto Rico Posts: 736 Thanks: 370 Thanked 384 Times in 240 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	There she is Sent from my iPhone using Tapatalk

05-23-2014, 09:52 AM	#123
Pablitomarrero Senior Member Join Date: Mar 2013 Drives: FR-S 10 series Location: Guaynabo, Puerto Rico Posts: 736 Thanks: 370 Thanked 384 Times in 240 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	Im going to switch tire sizes today in the rear... Gonna try 265. I dont think it will rub, i just think that there is too much exposed lip... Sent from my iPhone using Tapatalk

05-23-2014, 12:25 PM	#124
UltraMarine86 Senior Member Join Date: Feb 2013 Drives: Ultramarine '13 FR-S Location: Hampton, VA Posts: 224 Thanks: 148 Thanked 69 Times in 37 Posts Mentioned: 4 Post(s) Tagged: 1 Thread(s)	Yeah that's what I'm gonna try next. My 255/35's are very slightly stretched Sent from my SCH-I605 using Tapatalk

05-23-2014, 02:43 PM	#126
UltraMarine86 Senior Member Join Date: Feb 2013 Drives: Ultramarine '13 FR-S Location: Hampton, VA Posts: 224 Thanks: 148 Thanked 69 Times in 37 Posts Mentioned: 4 Post(s) Tagged: 1 Thread(s)	So your doing 255/35 front and 265/35 rear? Sent from my SCH-I605 using Tapatalk

User Name		Remember Me?
Password