Full throttle Electric Supercharger Build Thread

[DAEMANO]

Originally Posted by murselyfe

I've had my kit for a few weeks now.

It's still not installed... @DAEMANO lol

ROFL, Dude what's the issue. Are you still waiting on batteries? Pm me if you need help.

[fenton]

I got a proceed yesterday, does sojhinn have a video for it?

Sent from my Nexus 9 using Tapatalk

[murselyfe]

Originally Posted by DAEMANO

ROFL, Dude what's the issue. Are you still waiting on batteries? Pm me if you need help.

I've been lagging... lazy.

I'll let you know when I pick a weekend to install it, lol.

[DAEMANO]

Originally Posted by fenton

I got a proceed yesterday, does sojhinn have a video for it?

Sent from my Nexus 9 using Tapatalk

Here you go! This is for BRZ. For those that might be reading this with an FR-S (non Monogram/10 Series), the early part of the video has some parts that don't apply (basically it's slightly easier with the FR-S having less standard equipment behind the glove box). Note, I used the wire taps with no problems (just made sure they got excellent connection and crimped tight). If you choose to solder, there's enough room so it totally doable just takes a bit more time.

[ame="https://www.youtube.com/watch?v=5FpB5U2GJdo"]Procede Install for FT86 - YouTube[/ame]


Lastly, if Shiv didn't provide it out of the box. You'll also want to install Sojhinn's Rev 2 Procede map too, HERE:
http://www.ft86club.com/forums/showp...0&postcount=73

With full info on how to do it here:
http://www.ft86club.com/forums/showthread.php?t=87889

[Sojhinn]

Originally Posted by fenton

I got a proceed yesterday, does sojhinn have a video for it?

Sent from my Nexus 9 using Tapatalk

Looks like @DAEMANO got you taken care of. Email me or message me bro if you want more help.


Sent from my iPhone using Tapatalk

[WNDSRFR]

Originally Posted by murselyfe

I've been lagging... lazy.

I'll let you know when I pick a weekend to install it, lol.

Maybe you should put your kit up for sale. How about to the highest bidder? I'm sure you could get a good price for it.
You obviously aren't in the zone.

[murselyfe]

Originally Posted by WNDSRFR

Maybe you should put your kit up for sale. How about to the highest bidder? I'm sure you could get a good price for it.
You obviously aren't in the zone.

Haha... yeah... I think I've been on the list for almost a year and it just happened to have come at not the best time.

However... selling it may bring about ragrets.

[Robftss]

Originally Posted by DAEMANO

Here you go! This is for BRZ. For those that might be reading this with an FR-S (non Monogram/10 Series), the early part of the video has some parts that don't apply (basically it's slightly easier with the FR-S having less standard equipment behind the glove box). Note, I used the wire taps with no problems (just made sure they got excellent connection and crimped tight). If you choose to solder, there's enough room so it totally doable just takes a bit more time.

Lastly, if Shiv didn't provide it out of the box. You'll also want to install Sojhinn's Rev 2 Procede map too, HERE:
http://www.ft86club.com/forums/showp...0&postcount=73

With full info on how to do it here:
http://www.ft86club.com/forums/showthread.php?t=87889

I think the one we got sent is a little different.

Any special instructions for hooking this thing up and updating it shiv@openflash ?

Sent from my SM-G920W8 using Tapatalk

[Sojhinn]

@Robftss is there any spot for a usb?


Sent from my iPhone using Tapatalk

[Robftss]

Originally Posted by Sojhinn

@Robftss is there any spot for a usb?


Sent from my iPhone using Tapatalk

There is no USB, only console connection.

Sent from my SM-G920W8 using Tapatalk

[Sojhinn]

Originally Posted by Robftss

There is no USB, only console connection.

Sent from my SM-G920W8 using Tapatalk

Ok. So do you have a computer with the serial connection? If not make a run to a computer store for a USB to serial connection.


Sent from my iPhone using Tapatalk

[DAEMANO]

Originally Posted by Robftss

There is no USB, only console connection.

Sent from my SM-G920W8 using Tapatalk

I'm sure @Shiv@Openflash will have an answer.

Don't know if this is going to help or hurt, but...

To my eyes, the PROcede controller that @fenton was sent looks like it is wired for the Phantom ESC. So long as the correct PROcede map is loaded onto the controller it should install the same as the PROcede in @Sojhinn 's video.

The connector looks like it could be a standard DB9 RS232 serial cable, so if you don't have a computer with one of these you can try a serial to usb cable like this fancy one for $20: http://www.amazon.com/GearMo%C2%AE-R...=serial+to+usb

And don't forget a gender changer if needed.
[ame="http://www.amazon.com/C2G-Cables-02781-Female-Changer/dp/B00005111M/ref=pd_bxgy_147_text_y"]Amazon.com: C2G / Cables to Go 02781 DB9 Female/Female Mini Gender Changer: Electronics[/ame]


At one time there were some issues getting the PROcede to connect to Windows 7 for the haughtier BMW crowd. A fix for that is located here: http://www.e90post.com/forums/showthread.php?t=501816

and here:
http://www.e90post.com/forums/showpo...7&postcount=22

Oh and Page 9 of this user manual might help (who knows ):
http://www.e90post.com/forums/showthread.php?t=464460

If none of that helps, please don't tell me. Delusions of black-belt level Google-fu power my ego like a can of spinach to Popeye

[DAEMANO]

Originally Posted by Sojhinn

Ok. So do you have a computer with the serial connection? If not make a run to a computer store for a USB to serial connection.


Sent from my iPhone using Tapatalk

You fast man!

[Sojhinn]

Originally Posted by DAEMANO

You fast man!

You have google-fu. I have Tapatalk-fu


Sent from my iPhone using Tapatalk