NORCAL: Local Marketplace Buy/Sell

[honey86]

Bilstein B14 Coil Overs

- Never Opened
- New still in box

Price: $1000
Location: San Jose - but can meet someone in Northern Ca. to drop them off

Please reach out with any questions you have.

[Angelobaerz]

WTB Greddy Evo GT for 13-16.@@@

[tony_r]

Originally Posted by tony_r

Have two sets of TR Motorsport C4's, 17x9 +45, 5x100. A little dirty from brake dust and rubber but otherwise fine. Nothing that can't be cleaned, no bends.

First set has 245/40 Bridgestone RE-71R's with about 5/32nds tread left, 2018 date codes. $750

Second set has 245/40 BFGoodrich Rival S 1.5's with about 5-6/32nds tread left and a mix of 2017/18 date codes. $750

Both sets of tires have plenty of competitive life left and were mounted in April, I was using this stuff for autocross. Lot's of road miles left too.

Pics here - https://photos.app.goo.gl/eWPnK5BLAg6qJ3sN8

Still have these and am negotiable.

[Clutch Dog]

Originally Posted by tony_r

Still have these and am negotiable.

I would love to pick these up as I am getting INTO autox and hdpe's this year ( been running 18x8s) but i am in san diego and literally its the worst just looking at these prices..

[thecarfilmer]

fs: pbm rear lower control arms - $300.

bought them from a friend half a year ago and its been sitting in my room taking up space. located in alameda/sf/oakland.

[tony_r]

Originally Posted by Clutch Dog

I would love to pick these up as I am getting INTO autox and hdpe's this year ( been running 18x8s) but i am in san diego and literally its the worst just looking at these prices..

I might be able to get them down to the LA area sometime this weekend. Have some friends coming up to autocross and maybe can send them back. PM me.

[canyons]

Feeler:

FS: 2013 Supercharged BRZ

Adult (40s) owned & modded BRZ built for canyons and light track use. This is a grown-up build, over-engineered for longevity. Not abused. Second owner. Purchased car stock in 2016. Garaged since i've owned it.

Base car:
- 2013 BRZ in World Ralley Blue
- 6 speed MT with LSD
- Stock interior
- Stock stereo & Electronics
- 49K trouble-free miles
- This car does is not affected under the factory head recall.
- 3M Ventureshield clear-bra on front bumper & headlights
- Some minor dings/dimples ( i bought the car used)

Engine:
- 2.0L FA20, stock internals
- Jackson Racing C38 Supercharger kit with 10.5lb pulley (California Smog legal with JR tune)
- Jackson Racing Oil Cooler
- JDL Catted high flow exhaust header, ceramic coated ( not CA smog legal) plus OEM header
- Delicious e85 tune with piggyback ECU, inc 750cc fuel injectors, upgraded fuel pump
- Car will run any mix of pump 91 to straight E85
- Intercooler Fan assembly (custom made)
- AEM electronic gauge for Oil Temp/Press mounted in Driver's air vent

Transmission:
- OEM ratios
- ALuminum driveshaft from driveshaftworks
- Upgraded Exidy stage 2 clutch at ~42K mi
- Perrin transmission support mount
- All fluids done at ~28K

Suspension:
- Tien monosport single-adjustable (compression & height adjustable) coil-overs
- Body braces front and rear, upper and lower
- adjustable rear sway bar
- ajustable rear links
- currently -2.0 all around

Brakes-Wheels-Tires:
- Wilwood 6-pot front brakes and BP1 pads on slotted rotors
- upgraded rear drilled/slotted rotors and EBC pads in OEM rear calipers
- Porsche brake duct air dams installed
- Enkei gold RPF1 wheels, 17x8 fronts, 17x9 rears. Additional Spare RPF1 wheels included in each size.
- Michelin Pilot Super Sport tires in 225/45 and 245/45 respecectively, with two spare new rear tires

Other:
- Tinted rear tail light covers
- Braille 15lb battery
- Custom fabricated fender vents with 'supercharged' logos (spare stickers included)
- OEM fog lights & housings swapped for evented models, Originals includeds
- pinch weld adapters (jack pads) permanently installed
- High-grip aftermarket pedals (four)
- OEM owner's manual included
- OEM spare tire & tools
- All service records since purchase ( i am second owner)
- Mod journal with printouts & procedures



Please that a new BRZ will cost ~$29K with barely 200HP. Total cost of mods excluding labor is ~$10K.
This car makes ~360 at the crank, and >300 at the wheels, depending on fuel used.

- Asking $ 32,000 negotiable
- Reason for sale: Cash needed for home purchase
- Local pickup in SoCal only.
- contact me -here- please, thanks

-----------------------------------------------

-----------------------------------------------

-----------------------------------------------

-----------------------------------------------
- Additional pictures here: https://imgur.com/a/tiyC4

[BPM]

Parting out some parts from my 86:

Neon yellow (could use some repaint) Enkei RPF1 17x9+38 w/ 595rr 75% thread, has curb rash on the inside of 2 rims (not seen) overshooting an apex still drives straight and great as a track set - $750

Neon yellow Enkei RPF1 18x9.5+38 w pilot super sports 85% thread, rims in great condition - SOLD

Muteki sr55 lug nuts (blue color has been stripped quite a bit but still very functional, these are stainless steel lugs) - $20

SPC rear LCA - SOLD

Whiteline rear sway bar adjustable end links: $50

Stance front sway bar adjustable end links: $20

KWV3 with verus engineering front camber plate and swift spring upgrade, original springs also included: $1500

Toms red tail lights w/ LED relay: SOLD

Tapturn strobe series custom led relay 13-16 models- $40

Greddy evo 3 catback exhaust, has a dent on the connection between axel back and midpipe but will bolt on and off completely fine (needs new gaskets) - $300

Schroth racing 4 point ASM harness - $300

Verus engineering front chasis splitter - SOLD

5-axis side skirt replica (good fitment) paint matched WRB - $200

Authentic bride lowmax REIMS bucket seats with low max rails in excellent condition (driver and passenger) - $1750

Perrin inlet tube black - $50

Bump

[Bach415]

Originally Posted by BPM

Parting out some parts from my 86:
Verus engineering front chasis splitter - $200
Bump

What's the condition of the splitter and is this one with or without the rods?

[SprocketPower]

Decided it's time to sell my 2013 FRS - just bought a house and going back to school across the bay soon so life has gotten a little busy for it

Full disclosure - it has been in two accidents but it's still a clean title. I got break checked while working and my front end on the driver's side got hit, and I was rear ended during work as well.
All body work done at Milani's Autocraft in Novato. Other work done at Racersline in Concord
Currently has a some mods, but I also have the stock parts if you want to switch out. (Tomei header, MXP comp exhaust - will be selling my open flash 2 separately)
Whiteline rear inserts
Will come with Apex ARC-8s in bronze and the stock wheels.
About 69k miles
I'm the second owner, picked it up in SF in 2017.
Getting some feelers, have it posted on cg for $15,500.
I just got it back from the valve spring recall, had to in order to renew the reg this month

Message me with any questions
https://photos.app.goo.gl/HPFxX9dimAwLWgQC8
https://photos.app.goo.gl/poWFLLCePHyhjstZ6

[svolo4]

Originally Posted by svolo4

For sale or trade:

Part shop max Limit Break outer tie rods- $90
Megan tie rods - $60
Megan toe arms - $120
Whiteline front swaybar links - $80
Milltek catless FP - $300
Milltek OP - $200
Or buy Milltek OP+FP combo for $400
Pair of DSS axles 600hp - $600

Stage 2 fullblown motorsports heads. Cores need work, valves/springs and whatever parts fullblown put in them are usable - offer me something for it.
Forged internals: pistons and rods. One rod is toasted, pistons looked fine, but I can't judge on condition - offer something.



Will trade for anything in this list:
Authentic bucket seat, seat rails (driver side), aftermarket clutch pivot bolt, billet clutch fork, aftermarket engine mounts, CF driveshaft, steering rack inserts, authentic steering wheel with quick release, rear subframe braces, rear strut brace, authentic bolt in rollcage, authentic 4pt seatbelts, tom's or valentis tails.

Also have tons of stock parts: all suspension arms, stock 2015 springs, stock knuckles, stock catback, ignition coils, intake manifold.

bump

[Tahz]

Selling my Wheel Spacer H & R that i only use for 40 miles. 20mm 12x1.25 56.1 for 90 dollars. Msg me thanks!

[akahenry]

FS: Stock Front Pipe from a 2014 Subaru BRZ. The front pipe was taken off at approx 20k miles. Asking $75 obo.

[tk1.frs]

WTB SPEC D OR VLAND HEADLIGHTS

WTS STOCM TAIL LIGHTS & 4TH BRAKE LIGHT FOR $100


Sent from my iPhone using Tapatalk