(ECUTEK) Stock tune for brz?

[RyuHD]

Does anyone have a stock tune for the brz on ECUTEK, my car wont start when i have the tuned rom in it, and i couldnt save the original tune for it, ive been trying to find it for awhile now.

[kev0]

Ecutek program downloads all stock maps. You just have to look for it through the program.

[tomm.brz]

help, ecutek update, update rom list

[steve99]

You need to know which calod to flasb to car if your doing a recovery


What is year of car and is it auto or manual


Also what was your original ecu calid ?


And calid of tune you flashed

[tomm.brz]

Originally Posted by RyuHD

Does anyone have a stock tune for the brz on ECUTEK, my car wont start when i have the tuned rom in it, and i couldnt save the original tune for it, ive been trying to find it for awhile now.

if it doesn t start usually is a wrong MAP sensor scaling

[DarkPira7e]

Originally Posted by tomm.brz

if it doesn't start usually is a wrong MAP sensor scaling

This is what I was thinking when I read "no start"

OP, what are your modifications?

[RyuHD]

Originally Posted by DarkPira7e

This is what I was thinking when I read "no start"

OP, what are your modifications?

-JDL Turbo Kit w/ UEL Manifold V2
-SKUNK2 Racing Coilovers
-AEM Boost & Air Flow Gauges
- Setrab ProLine Oil Cooler
-JDL Intercooler
-RadiumAuto Fuel Lines
-TurboSmart Blow-Off Valve

[RyuHD]

Originally Posted by kev0

Ecutek program downloads all stock maps. You just have to look for it through the program.

yea i found it and my car supports ZA1JA01C

[RyuHD]

Originally Posted by steve99

You need to know which calod to flasb to car if your doing a recovery


What is year of car and is it auto or manual


Also what was your original ecu calid ?


And calid of tune you flashed

Current is ZA1JA01c
I flashed the Same one as ZA1JA01C Rom File

2013 Subaru BRZ 2.0 limited - (MANUEL)

Which one should i flash with all these mods?

-JDL Turbo Kit w/ UEL Manifold V2
-SKUNK2 Racing Coilovers
-AEM Boost & Air Flow Gauges
- Setrab ProLine Oil Cooler
-JDL Intercooler
-RadiumAuto Fuel Lines
-TurboSmart Blow-Off Valve

[kev0]

Originally Posted by RyuHD

Current is ZA1JA01c
I flashed the Same one as ZA1JA01C Rom File

2013 Subaru BRZ 2.0 limited - (MANUEL)

Which one should i flash with all these mods?

-JDL Turbo Kit w/ UEL Manifold V2
-SKUNK2 Racing Coilovers
-AEM Boost & Air Flow Gauges
- Setrab ProLine Oil Cooler
-JDL Intercooler
-RadiumAuto Fuel Lines
-TurboSmart Blow-Off Valve

Um, what? I wouldn't flash a stock ROM at all if you have a turbo kit installed on it. You need to get a custom tune so you don't damage your engine.

[tomm.brz]

maybe you are in confusion about this, but ecutek doesn t really provide custom tunes
you need to contact a master tuner to buy one

[DarkPira7e]

Originally Posted by RyuHD

-JDL Turbo Kit w/ UEL Manifold V2
-SKUNK2 Racing Coilovers
-AEM Boost & Air Flow Gauges
- Setrab ProLine Oil Cooler
-JDL Intercooler
-RadiumAuto Fuel Lines
-TurboSmart Blow-Off Valve

You definitely need to have a custom tune. Certainly you have injectors and an aftermarket MAP sensor at minimum. Both of which will cause a wildly negative impact on a car without a tune meant to accommodate them

[steve99]

Ok


Now we know you flashed turbo rom if its cranks over bit wont start its most likey cause ghe map senspr installed doesnt Match map senspr scaling in tune.


If it doesnt even crank then it another problem.


Most turbo tunes will reqore a 3 or 4 bar map sensor to be installed to enavle boost monitoring and overboost failsafe and boost control


Ask tune supplier whaat map sensor is neeeded for tune