FS: PA Enkei Raijins, Enkei EVO5s

[SterlingBrz]

Hey folks, my brz is now being used for auto x and only auto x and I am getting a set of 17x9 rpf1s with a 245 series tire, so i need to get rid of this stuff.
I will be bringing both sets to my next event at the Wells Fargo Center in Philadelphia for those who would like to see them in person.
PLEASE DO NOT ASK IF I WILL SEPARATE WHEELS AND TIRES
Please PM me, Email me or Text me
Tenochs@comcast.net 610 seven 2 4 - 3 seven 3 2
Heres the link to the FS thread: http://www.ft86club.com/forums/showthread.php?t=67185

First up is my new set of Enkei Rajins 18x8.5 up front with 225/40/18 bridgestone S04 pole positions, and 18x9.5 in the rears with 255/35/18 bridgestone S04 pole positions. TPMS are already installed as are hub centric rings. No I will not separate anything. These were on the car for less than 100 miles before putting on my auto x wheels. I somehow managed to hit a pothole (not that hard after this winter) and put a small bend in the lip of one of the fronts. The wheel is not bent, and it is not loosing air, only the lip is damaged (see pic)
Im looking to get $1500 with the one wheel as is, and $1700 fixed. I was quoted 115 to repair it.
Prices are picked up, not looking to ship at this time.


Next up is my set of 17x7 Enkei evo5s 17x7 et42 with 225/45/17 BFG Rivals.
Perfect for CS class auto x as they are the stock size and width with beefier tires and the maximum allowed offset. Wheels are in decent shape, no rash, but some of the finish is getting white marks. I bought the wheels used for $450 and the tires new for 600 + shipping and installation. These have 2 auto x sessions on them so easily 85-90% tread left and were properly heat cycled.
Im asking $700 for them picked up.
I Will take pics of them off of the car when my new set gets here wednesday.

[SterlingBrz]

bump, pics on link now working