FS (NY): Borla UEL Header/Visconti Flexfuel Kit

[sebastiansim]

For sale is my borla UEL header. Only had on the car for about 8000 miles. Never had any issues with this header; no leaks, no flange warp, no fitment issues of any kind.
As for the flex fuel kit, it ran great when I had it and managed to make a decent amount of power with it (210whp). There are no flaws with this item either, and even comes with the extra ethanol content analyzer that lets you see how much ethanol you are running real time.
Only reason for selling either item is that I am trading the car in soon so need to sell everything on the car.
Looking for $425 picked up/$450 for the header
$400 picked up/$410 shipped for the flex fuel kit

[Parapooper]

What tuning device did you use with the flex fuel? I'm wondering if it would work with an open flash tablet

[sebastiansim]

Originally Posted by Parapooper

What tuning device did you use with the flex fuel? I'm wondering if it would work with an open flash tablet

I had a protune done from visconti himself. This flexfuel kit would not work with an oft as it adjusts the ecu on the fly constantly.

[FRSBRZGT86FAN]

Originally Posted by sebastiansim

I had a protune done from visconti himself. This flexfuel kit would not work with an oft as it adjusts the ecu on the fly constantly.

OFT supports flexfuel now, it just would depend on how its connected to the ecu. It doesn't directly adjust the ECU, you have a tuned flashed from an ecutek tuner like visconti that reads a voltage and equates that to ethanol content.

http://www.ft86club.com/forums/showthread.php?t=109995

http://www.openflashtablet.com/shop/...flex-fuel-kit/

Originally Posted by Parapooper

What tuning device did you use with the flex fuel? I'm wondering if it would work with an open flash tablet

@steve99 any idea on whether this would work with an OFT tune?

[steve99]

Originally Posted by FRSBRZGT86FAN

OFT supports flexfuel now, it just would depend on how its connected to the ecu. It doesn't directly adjust the ECU, you have a tuned flashed from an ecutek tuner like visconti that reads a voltage and equates that to ethanol content.

http://www.ft86club.com/forums/showthread.php?t=109995

http://www.openflashtablet.com/shop/...flex-fuel-kit/



@steve99 any idea on whether this would work with an OFT tune?

All flex kits usually convert the ethabol % to a 0 to 5 v signal

Oft just needs this signal connected to the evap pressure intput on ecu. Some kits conbect to rear 02 sensor. The kits can be converted fairly easily bit requires some extra wiring, the kit above looks like a rear 02 connect so you wold need extra wiring and plugs to ise with oft tune.

If you buy the guys ecutek kit you can use his visconti tune if you have uel header or buy his header assuming you both have same intake and both same transmission 2012-2016 car. You would jist need new ecutek licience for ecu

[sebastiansim]

bump

[sebastiansim]

Price drop $400 shipped for borla header and $375 shipped for flex fuel kit.

[sebastiansim]

Bump

[devildriver.ab]

How subaru rumbly is this header?

[sebastiansim]

Both header and flex fuel kit are sold!