black buttons????

[iBRZ]

^^ And this is awesome. $60 is even better. Now I can buy the next round of drinks for @Nikkojoe :happy0180:

(I can't believe I missed your work, thank you)

[Nikkojoe]

Originally Posted by iBRZ

^^ And this is awesome. $60 is even better. Now I can buy the next round of drinks for @Nikkojoe :happy0180:

(I can't believe I missed your work, thank you)

mmm electronic drinks..... but need to get more part numbers first!

Now before I continue just remember that these are off a RHD version, however the layout on these cars seem somewhat interchangeable.

Shifter surround (MT AND AT seem the same - RHD=LHD ) - JDM G/RC
http://www.amayama.com/search/?q=su00303190

A/C vent Bezel (RHD=LHD)- JDM G/RC
http://www.amayama.com/search/?q=su00301915

LHD Black Radio Facia
Middle piece
http://www.amayama.com/search/?q=su00301910
RHS piece
http://www.amayama.com/search/?q=su00301932

Steering wheel Black trim insert -JDM G/RC
http://www.amayama.com/search/?q=su00304253

Door Lever Black (LHD=RHD) - JDM G/RC
RH
http://www.amayama.com/search/?q=su00301562
LH
http://www.amayama.com/search/?q=su00301563

Door Handle Cover (LHD=RHD) - JDM G/RC
RH
http://www.amayama.com/search/?q=su00303270
LH
http://www.amayama.com/search/?q=su00303271

If you want anything else post it up

[JoeBoxer]

Subscribed, i'm thinking about getting the buttons, a/c rings, steering wheel piece, and door handles. I can wrap the shifter surround, radio bezel, and door grip covers.

[ImAwesome]

We need that post stickied, good work mate

[jazztennor]

Originally Posted by Nikkojoe

Just to confirm prices....
http://www.amayama.com/search/?q=SU003-02486
http://www.amayama.com/search/?q=SU003-02487

Now I posted up aus gt vin numbers in the other thread so if someone wants to confirm the part numbers for them they can..

Do we know which one is the AT and the MT???? so we know for sure what part to order????

[Nikkojoe]

Originally Posted by jazztennor

Do we know which one is the AT and the MT???? so we know for sure what part to order????

Just for you i'll requote this post :

Originally Posted by Nikkojoe
Id say it's G/RC spec, which the p/n on the JDM 86 is different to the GT.

Low Spec
SU003-02486 6MT (G,RC)
SU003-02487 6AT (G)

High Spec
SU003-02484 6MT (GT)
SU003-02485 6AT (GT)

You want the low spec part number. The links that I provided have the part number listed so you can see which button is for what transmission type.

FYI the AUTO buttons are more expensive (because of the extra button for snow/sport mode).

[dem00n]

Originally Posted by iBRZ

I hear you but I look at it like this:

$130 is a nice meal out. A meal I'll be depositing into the toilet the next morning. Meanwhile, I'll be using these buttons everyday for YEARS (especially once my tuner maps the buttons). And, in the larger scheme of my budget I'm spending about $2k modifying the interior and electronics to have a car setup exactly how I want.

Also, even after spending $2k, still this car is pretty inexpensive considering what's out there.

Now, for the record -- much of my plans are based on blacking out most of the dash. So, $130 dollars for buttons? Absolutely Nuts! No question. $130 for a buttery smooth silky interior of awesome? Totally worth it.

I guess I've surrendered to the notion that sometimes commitment to design costs a little more $$$

You don't have to buy them & I'm an Apple fanboy -- so of course I would say such things...

I bet it would be cheaper to get someone with a 3D printer make them for you.
Its buttons, something you nor anyone would not give a second though about after they are installed...

[iBRZ]

Originally Posted by dem00n

I bet it would be cheaper to get someone with a 3D printer make them for you. Its buttons, something you nor anyone would not give a second though about after they are installed...

RE: printer --Doubt it. And I'll notice silver buttons when I black out the shifter; that would look so lame.

And, btw -- did you see they are actually $60 now through the other site?

[jazztennor]

cant go wrong with $60. Just get the real thing dont go with a printer

[86 FRS]

oh nice this is cheaper. did somebody already order on this site?

is the door lever the one u use to open the door? lol i dont know which one haha

[iBRZ]

ordered. I'll let you know.

[86_ZN6]

wow pricey stuff!

i say just plati dip the trims and buttons

[Turbowned]

yeah, datsa lotta munie!! The only drawback of painting the buttons is a. they're backlit and b. you have to find a way to re-label them somehow.

What I want to do is paint the silver plastics with a better metallic finish paint so they actually look like metal instead of painted plastic. I wonder if an engraver can very lightly engrave "trac" and "vsc sport" on the buttons or if they're too thin to do that.

[jazztennor]

Originally Posted by iBRZ

ordered. I'll let you know.

ya keep us updated